I noticed there's no threads holding that stand on I would never trust it. I suppose it's just for moving the bike around the garage doesn't seem very useful for working on the bike because it doesn't go very high. I just ordered the Abba sky lift I'm gonna go with that

Great video!! Helped a lot.. but what a ball-ache to fit. It took me 2 hrs!! All done, though 👌

I want to know about constand for MT-10 I see for sale I see photo of adaptor plate but I cant find video simply showing how it lifts THE MT-10 SPECIFICALLY how do they expect to sell without that??? Compared to this Ducati the MT-10 has huge wells in the frame LOOKS like it could work very well ! So why in the world dont they SHOW it anywhere???

Mines threw a code after putting everything together , abs and check engine light code came on, Any suggestions?

Very useful 👍🏻

Any chance you can confirm the bolt size under the tail on both sides? (The difficult ones.) I'm working with allen wrenches. Almost looked like a 5mm would get in there. Too small. 6 seems to be too big. My 5.5 won't get back there.

The carbon goes perfectly

I'm glad I watched this. I have a bunch of CF parts going on this weekend to include the heat shield and rear hugger. But I'm also changing oil and replacing air filter. So tank removal is probably a good idea.

Thank you, I have already ordered it for my motorcycle

Nice lift, what did it cost?

Hello im wondering about the metal piece thats is holding the exhaust under the seat. Where can i get that?

Great video. How has it held up? Do you feel comfortable wrenching on the bike with it up in the air? I just got a '05 GSXR 1000 and the garage is getting full, I'm heavily considering ordering one of these but I'm not sure what I think yet. It's perfect to move the bike into the corner for storage, but I don't know about putting all that leverage in that one little spot, or doing a tire change etc. with it hanging like that. Also a bit concerned that it could warp something. Anyone successfully use one of these for a while?

Well done review. Very thorough exactly what I’m looking for. Thank you ❤

What raises and lowers the windscreen? I noticed the edits showcase it at different heights (I have no audio on my end so sorry if you discussed this in the video)

Hi! Thanks for the informative video. Any update, four years later? Still two thumbs up?

Did it reduce the heat?

17mm for the oxygen sensor

I know I'll get all the have in the motorcycle world for this comment so... here it comes: is there an aftermarket CAT for this type of exhaust? this particular motorcycle is somehow a tourer and its meant to do long trips and long mileage life, I think it would be responsible to have a catalytic convertor (its aimed to a more responsible market after all), if not, then stock is the way for us. It seems just wrong to have a Tesla, solar house roof and a Ducati without a CAT but we love the sound too.

I'm so glad i waited for the V4 to come out, what a pain in the ass!

Does it stop the heat from cooking you?

Another reason not do it many countries is that it is illegal and at the very least you will need to refit the standard exhaust every year for the bikes annual inspection once it is 3 years or more old. However having accepted that, if you refit the original dies the map key have a standard map to upload and or will it support the standard exhaust as well as the liberated one?

This was a great video and really helped me to realise that yes this is likely beyond my level of mechanical sympathy to complete on my panigale V2

What size wrench did you use for the oxygen sensor?

Thank you. You helped me figure out the last part. The single piece that attaches to my bike

Nice review ! other than cost , the only other downside is you can't put the bags on it

Thanks! Well done! I was looking for my 939s. You convince me ;)

Did you have to import it? I'm not seeing anywhere in the US, and import costs make it about as much as an Abba skylift. Difference being, they're in the country. (US).

Hi there, on the stock exhaust, is the cat and slip on all one piece?

Next time start the freaking thing up

I've got a Constand Paddock Lift that I had used on my previous bike, but when I went to buy an adapter for my R NineT, they advised that they refuse to ship to the US and won't give a reason why. I had purchased this stand thinking it was a long term solution for future bike purchases, but now realize its just an expensive piece of metal sitting in the corner of the garage. I've tried looking on eBay and other places on the internet, but have not had any luck So if anyone has an extra adapter for the R NineT laying around they wish to sell, I'm a buyer. Otherwise, if you're looking for a stand like this, I would avoid this manufacturer altogether. They may not support you in the future.

Great video man ! How long does it take to do all that ?

Hello, i also got one since yesterday. I am little unsecure about the gap between the bolt and the frame nut, when u uplift it. I was considering drilling a whole into it and when ever i mount my bike to stick a pin inside this hole wich will then keep by force the bolt inside the Framenut. What are your ideas about this.,

Thank God for your video. Assembly instructions for this are crap! Have had better luck with Chinese products - and I speak fluent German!!!! And by the way, the name in German for the part you mention @10:43 is a "Rahmenhülse" or in English a "Frame Sleeve"

I am with the guys first comment,why post an informational video and not answer a question,USELESS

Considering getting this. Do you have DB (decibel) reading with both exhausts? I don't want it to be much louder, just deeper

Hi buddy,I have the 959 panigale,bad heat issues,does the carbon fibre shield help rectify the problem?or do you think heat wrap around the rear exhaust be better?thanks,great video,very helpfull,

Bursig is much better but this is a great review for people who would consider this lift.

Did you change it because of the aesthetics or to fix the heat problem?

Whats the benefit of uploading the video when you don't reply

Nice video review! Big downside with the Akra full exhaust is that you have to remove the heat shields on the pipe coming out of the vertical cylinder. Those were part of a big recall campaign from Ducati because year-1 models didn't have them and the generated heat would eventually damage the components of the rear shock placed right above it. Maybe the whole set generates less heat, especially once stripped of that horribly bulky catalizer, but I'd suggest to check your rear shock anyway for signs of damage to the rubber components. Maybe Akrapovic didn't bother to make it compatible with said heat shields, since in most countries this would be a track-only exhaust, one you just use once in a while...

whats up man! did the carbon heat shield worked? thanks man

Save your money, piece of junk. And if you have anything to return or questions ,exchange. Consider your money and returned stand gone and move on.. You will never get anything more from Motea but a lesson learned....

i got same kind of reflexions. snot easy to assemble and then quite not easy to plug it to the bike by holding it without its stand..(Yamaha mt-10 sp) I made a video if you're insterting. Cheers and V

UPDATE: After 5 months of running the Akrapovič Full Exhaust I am still thrilled with the package. Going back and running a stock Supersport just feels wrong. The enhancement in torque curve (around 5k) makes a huge impact on both daily riding and track days. For long rides 6+ hours I will put in the dB killers to avoid the drone of the bike at constant speed. Other than that - I let this baby bark! I'm get regular complements on the sound of the system. If you own a SS or are thinking about a purchase - this is a must!

Very informative

Awesome review!! Do you happen to have a copy of the installation manual PDF you could share?

Great review - i'm sold!

Which windscreen?

Great post thank-you - I love the look of this system - Is the sound significantly better than stock? I need to get one too .... is your tail tidy made by Ducati as I've ordered one for my SuperSport S with LED's but haven't seen one yet - yours looks great so I'm hoping it's the Ducati one that I've getting fitted next week on it's 600 mile service. Thanks Again !!! Gordon.

Moto Forza