Пікірлер
@Tony21882
@Tony21882 9 күн бұрын
I can’t find this brackets. We’re can I order them or what’s the part number on those brackets.
@mooreperformance22
@mooreperformance22 14 күн бұрын
Not a professional way to route the harness.
@russcaron5319
@russcaron5319 23 күн бұрын
My roll-back cover will not roll all the way back in ..does anyone have an answer to the problem..the canister is clean.
@ihategoogle4717
@ihategoogle4717 Ай бұрын
no link to the item lol
@waltstevens2850
@waltstevens2850 Ай бұрын
My ultagroove cover has seperated from the pull rail, the rail that the pull rope is attached. It appears to have become delamenated from the canvas top. It appears to be held by contact cement between the rail and the canvas. Can I repair it by relaminating with contact cement. Otherwise looks like i will have to use bolts to secure the canvas to the rail. T IA
@Taylorb47
@Taylorb47 Ай бұрын
Same thing happened to mine where you able to find a solution? ofcourse my warranty is for 5 years and it's been 5 years and 4months today🫠
@jennifercunningham2763
@jennifercunningham2763 Ай бұрын
Where brackets from?
@mc.charleymusic
@mc.charleymusic 2 ай бұрын
Can the license plate still be attached in front of that or will it have to be moved somewhere else
@maryellenwaltz8
@maryellenwaltz8 2 ай бұрын
Hi, my son has a 2024 Colorado. I scratched the gate cap. How i can i repair that scratch?
@samanthaMartinez-zv8ki
@samanthaMartinez-zv8ki 2 ай бұрын
How do we uninstall the trackrac rails?
@knightingify
@knightingify 2 ай бұрын
So you just leave the front shield with a clip at the front, 3 screws at the top, but hanging freely toward the backside? Yeah that’s going to make some noise while driving.
@NorthSaintPaulNews
@NorthSaintPaulNews 2 ай бұрын
just think if you could really get it in a few day... In 11 years it takes 4 Weeks to get one..
@juniormolinalopez5187
@juniormolinalopez5187 2 ай бұрын
Berry nice thanks for your help
@chrisavalon6198
@chrisavalon6198 3 ай бұрын
Is the seal supposed to sit on the tailgate or in front of it
@WPXTacoMan477
@WPXTacoMan477 4 ай бұрын
Just did this on my 2015 Tacoma trd sport, works like advertised. The metal arm and bracket that the solenoid pushes squeaks a bit, probably would’ve been ideal for them to be made out of brass rather than stainless.. figuring that it’ll wear down a bit over time and hopefully make the squeak stop. If not I’ll pop the tailgate open again some day and maybe put some Teflon in the spots it’s squeaking , idk 🤷‍♂️
@WPXTacoMan477
@WPXTacoMan477 4 ай бұрын
Blue to blue black for me. Also, had to go through the grommet under the drivers floorboard because the provided wire wasn’t long enough to reach from the wiring harness at the fire wall. If anyone ever cares to splice like.. 2 more feet to the wire, you could go through a hole that’s a few inches above the wire harness grommet , slightly behind the brake booster that isn’t occupied, just gotta poke a hole into the thin carpet, drill a hole in the small plastic grommet. That’s what I wanted to do but didn’t have enough wire length to reach. Also debating looking into finding a completely different solenoid to upgrade with, for now I’ll see how this one lasts.
@guitarcomet5
@guitarcomet5 4 ай бұрын
I bought one of these for my 2015 F-150. Looked great! Worked well. Waterproof, too. 3-4 years later, the paint began to flake off. Now (8 years later) it looks terrible! I don’t see any bare metal yet, but it’s probably not gonna be much longer. Still waterproof. Still working great.
@aaroncj1371
@aaroncj1371 4 ай бұрын
What size is the signal bulb?
@douglasstrain5251
@douglasstrain5251 4 ай бұрын
What size are the backside nuts?
@512juancho
@512juancho 4 ай бұрын
If i have a 2inch strut lift kit and install a 4" lift spindle will it raise the truck more?
@gsmit297
@gsmit297 5 ай бұрын
What about installing on a 2001 silverado 3500?
@jacoe33333
@jacoe33333 5 ай бұрын
Which Yakima rack system fits on this ?
@dennismusgrove3824
@dennismusgrove3824 5 ай бұрын
What is the part Number for the Tag Light Used in this Video , the one I bought is to small ??????
@manygarza4634
@manygarza4634 6 ай бұрын
How long does it hold the ice
@earlyblackmz
@earlyblackmz 6 ай бұрын
Where can you buy the replacement seal?
@Tony-hr4bl
@Tony-hr4bl 6 ай бұрын
How much does that cover weight?
@CJ-cv2yw
@CJ-cv2yw 6 ай бұрын
Thanks for the video, it was a great help, I just finished installing mine and the step-by-step directions was dead on, thanks again
@alvarez321
@alvarez321 6 ай бұрын
Am I the only one who thinks these are a waste of space? I guess you would have to have a specific truck for that. Otherwise I feel like it takes up a lot of use from the bed
@HeAdChEeSe1983
@HeAdChEeSe1983 6 ай бұрын
I was able to take off and on without un bolting the bed. It was tricky though like the transmission pan. This video shows that it can be done. I have to do it again though let's see if I can do it a second time. 2015 silverado.
@bismuth4847
@bismuth4847 6 ай бұрын
if anyone is watching this to figure out what size bolt you need so you can tap into the factory tonneau cover holes, it's M6x25. It is not an M8 bolt.
@wjadam815
@wjadam815 6 ай бұрын
Now do a video where you can easily rip it with your bare hands and no tools.
@ifixeverything5445
@ifixeverything5445 7 ай бұрын
Good work. Claro y al punto👍
@scottrupp9321
@scottrupp9321 2 ай бұрын
Why?
@ifixeverything5445
@ifixeverything5445 2 ай бұрын
@@scottrupp9321 why, why?
@Eyehearttravels
@Eyehearttravels 9 ай бұрын
Any video on how to change the corner piece on the bed rear cover ?
@wolverinesoldier6355
@wolverinesoldier6355 9 ай бұрын
Does anyone know on how many years an tonneau covers last ?
@zetroc7990
@zetroc7990 9 ай бұрын
Wheel setup please!?
@chrishunt5291
@chrishunt5291 9 ай бұрын
What do you have to do to replace the light.later on.
@TonySmith-H-Town_83.Detailer
@TonySmith-H-Town_83.Detailer 10 ай бұрын
Can you order for a 1999 Dodge ram 1500
@timedmond2539
@timedmond2539 10 ай бұрын
How do you replace the rubber seals along the length of the side rails?
@knucklesandwich8786
@knucklesandwich8786 11 ай бұрын
Advantage tonneau
@mihaiolaeriu8331
@mihaiolaeriu8331 11 ай бұрын
Do you happen to know if the Vengeance rear bumper is compatible with Rigd't UltraSwing Mega-fit?
@Doc1855
@Doc1855 11 ай бұрын
My Lo Pro should be here tomorrow 9/5/23 to install on my 2011 Ford Ranger. I’ve been asking my wife for a tonneau cover for our Ranger since we bought it in 19, as the bed fills up with snow every winter. I have to put 260# of sand bags over the rear axle for added traction during our very cold snowy winter months. We live in a very mountainous area of north central WA state and get 5-7 feet of snow every winter. Our pickup is a 4WD. We’re 5 miles from town and 25 miles from the city. Two years ago we had a big snow storm move into our area. The city had no snow prior to the storm but we had 2 feet on the ground. When that storm hit, we got 3 additional feet in 10 hours, whereas the city had only 1-2 feet. Next year we’ll be building an additional garage for the pickup. It will be installed and heated to 40 degrees F. Our over sized attached 2 car garage is also well insulated and it never gets below 40 degrees F. Believe me when our daytime temperatures are around 25 degrees F, 40 degrees F is nice to get into.
@Doc1855
@Doc1855 11 ай бұрын
What’s the difference between the Lo Pro and the Lo Pro QT?
@jeffraybourn9347
@jeffraybourn9347 Жыл бұрын
Thank you for sharing this video! It really helped me troubleshoot a wiring problem that I was having!
@stevevetter8045
@stevevetter8045 Жыл бұрын
Can you close the JackRabbit cover from the side of the Truck or by the strap only?
@user-hb6we5ut3b
@user-hb6we5ut3b Жыл бұрын
In my case, the stock cap prevents the door from closing on my truck cap.
@---tx9xx
@---tx9xx Жыл бұрын
hi there, power actuator question, i dont have a fob for my f150 i lock and unlock it with keys or the keypad, will that still operate the power actuators on the toolbox or is it oly with a frequency
@onssse
@onssse Жыл бұрын
thank you. this worked for me.
@sicks6six
@sicks6six Жыл бұрын
mark with a felt pen the underside of the alloy side steps through the bracket bolt holes, save a load of hit-n-miss attempts at lining everything up properly,
@wayneadee9080
@wayneadee9080 Жыл бұрын
was wondering if anyone had a part number for this kit. even the local dealer here cant help
@richardhowell7725
@richardhowell7725 Жыл бұрын
Way under-manufactured. Most of these steps could've been done at the factory. Thank you for taking the time to make this video!
@deedeegotgenetics
@deedeegotgenetics Жыл бұрын
I have a mostplus tonneau cover for my 2001 chevy Silverado 1500 the rear clamps do not close due to the bed having a shaved lip toward the rear of the bed. My installation guide doesn't show how to use the rear clamp hook, I was wondering if this video is the same fix for my issue? Do I remove from the shaft and attach it like shown in the video?
@Salharmonic1
@Salharmonic1 Жыл бұрын
Good video, but you didn't clearly show all the products.