How would I buy this follower?, I have a escort slugger in 12ga.
@04BlueSmokeКүн бұрын
@@user-wz3vf5mh7x go to woodlandarmory.com
@mile_highexo934823 күн бұрын
What magazine extension are you using?
@04BlueSmoke18 күн бұрын
This is the S&J Hardware +2 extension for the Winchester SXP shotgun. 12 gauge. You can find it here: woodlandarmory.com/product/winchester-sxp-2-magazine-extension/
@RajunCajun126 күн бұрын
Do you have that product for the Maverick 88 5 + 1 or the 7 + 1?
@04BlueSmoke26 күн бұрын
Good Day, The Maverick has a closed magazine tube at the front. Extensions will not work on those shotguns.
@princessmoni75Ай бұрын
Thank you so much!! I'm so glad to know that it's just that easy!!
@jy9638Ай бұрын
It makes a world of difference!! Thanks for the info.
@NCmtnDweller2 ай бұрын
Who was Charles Daly ?
@robertandrews65552 ай бұрын
Hi, do you export to the UK.
@04BlueSmoke2 ай бұрын
Good Day, No I don't. Contact sjhardware.com
@keithcon35052 ай бұрын
I had to cut the spring down to a little under 22inchs on my 590a1 18.5 inch 6 round...now 8 round with the +2. Feeding now feels lighter but still feeds well so all good. I installed a kicks buck kicker extended choke and it fits nice and flush.
@roeselli2 ай бұрын
Do I need to clip the spring for fit? Or do I use the entire thing?
@04BlueSmoke2 ай бұрын
If you order the follower and spring kit you do not need to cut the spring. It is already cut to the right length. Thanks Scott
@christinenunez2972 ай бұрын
I just bought this gun for home defense.
@roberttaylor82612 ай бұрын
I have a Tokarev USA 12 ga Automatic. Has synthetic stock with a rubber butt plate! I don’t see any holes in the Butt plate to take off? Any help? Seems glued in pretty tight don’t want to damage rubber buttplate?
@04BlueSmoke2 ай бұрын
Sometimes the rubber butt pad will have two very fine cuts in it that are just large enough to let a screw and screwdriver pass through. Use a bright light an press on the butt pad where the screws might be. Take a good look. Otherwise it may be molded in such a war that there might be a ridge around the perimeter of the butt pad that fits into a groove on the inside of the stock. I am not familiar with that model. Those are just my suggestions.
@roberttaylor82612 ай бұрын
@@04BlueSmoke Ok Thanks! Going to check today!
@roberttaylor82612 ай бұрын
@@04BlueSmoke I took the sling holder screw out on bottom of stock an the butt plate is held in with that screw an the top end is wedged under a slot so when cantilever an push bottom in the screw holds buttplate in!
@jeffadams98073 ай бұрын
U Need To ADD: 1) Streamlight TL-Racker, 1000 Lumen Forgrip Light... 2) 6rd Sidesaddle, Velcro Shot Card 3) Flash 5 Stock, For 5 Extra Round's...
@stevez3403 ай бұрын
I just bought a Stevens 320 with a pistol grip and 18 1/2” barrel. Can I slide a magazine plug inside the spring to limit the capacity to two shells and use it for duck or pheasant hunting?
@04BlueSmoke3 ай бұрын
Yes you may use a magazine limiting plug with the spring. Thank you Scott
@stevez3403 ай бұрын
@@04BlueSmoke Thank you👍
@franklastmanstanding94583 ай бұрын
Thank you for your video advice. How long will it takes to remove the two dimples? Greetings form Germany 😀
@04BlueSmoke3 ай бұрын
About 10 minutes to remove each dimple.
@chrismanning11713 ай бұрын
I had to send my Charles Daily back to the factory twice.
@tominva41213 ай бұрын
Do these work for the Hatson Bulltac bullpup shotgun?
@jimmyunger44774 ай бұрын
Can you order this in Canada
@mick57404 ай бұрын
How do you remove the spring retainer on a non dimpled Turkish to install the new one !?😂
@04BlueSmoke4 ай бұрын
Good Day, You must gently pry or pull the old spring retainer out of the magazine tube. This is a bit difficult. Take particular care not to bend or deform the end of the magazine tube when doing this. If the retainer is split and has two holes in it use a split ring pliers to squeeze together the split as you pull upward. Try to rock the retainer back and forth. Wear safety glasses! The spring is under tension and will shoot out of there once the retining cap is off.
@norcalmex4 ай бұрын
How many mini shells fit on a 590s 18.5 barrel
@norcalmex4 ай бұрын
How many mini shells fit with that extension?
@walkercustoms4 ай бұрын
Does S&J carry components for the 20ga compact?
@04BlueSmoke4 ай бұрын
Hello, yes. The 20 gauge will use the same follower, the Type 5. You must have a tapered magazine spring. Most users buy the kit. Sjhardware.us
@delmaroran46674 ай бұрын
Do you have to cut the J,&S Fowler spring on 5 shot escort slugger pump
@troybingham64264 ай бұрын
I just installed a +1 mag extension on my 590A1 and it sticks out 3/4" past the muzzle. It looks ridiculous. I'm really disappointed. (I didn't get it from S&J Hardware. Probably a different make. Or else my mag tube is a different length.)
@mick57405 ай бұрын
You have parts for emperor pump ? Mine jams shells nose down unless racked fast and hard. Any ideas what the problem is ?
@mick57405 ай бұрын
My 320 is great. My emperor. Not so much. Jams on loading get hung up then will go. But the follower looks the same as yours. I may want to try yours though with the spring. Mpx12
@SOSdoorgunner695 ай бұрын
Stinks. falls off. will not go in the way he does it. you would have to dremel room. I sent mine back . don't waste you time just get the larger release. it's easy to install. you'll be sorry
@minerblue96415 ай бұрын
I never put any stock in Murphy's Law.
@user-hs4lo6vt3l5 ай бұрын
This follower and spring upgrade definitely makes the shell loading more reliable and is worth the upgrade
@jefferysylvester75695 ай бұрын
Can you please do a video on the installation of the spring and follower for the Escort Slugger 12 Gauge Shotgun, it would be much appreciated. Thank you
@dyoxxzr66z595 ай бұрын
Can’t get the magazine tube to screw on all the way, threads still visible. Figured out problem, needed to push follower up with the spring, they were catching .
@tomsreviews2385 ай бұрын
Follower only works with the S&J Spring. They sell the followers alone without the spring and DON'T tell you that. Follower needs a spring with a tapered end and they are very hard to find. I couldn't even buy one on the S&J website.
@justinjones90425 ай бұрын
I'm really thinking about giving it a try . Being on a budget seems friendly on the wallet and functional.
@bennwj4 ай бұрын
Biggest piece of garbage you could possibly buy. Save your money. I would go into all of the problems you can expect, but you can research that for yourself. We won two of these at a raffle. One of them fired exactly ONE ROUND before it died. The trigger would not reset. The second one fired maybe 25 rounds before the stock started coming loose. It’s an extremely poorly made shotgun. Loading and unloading is also idiotic. Beware.
@tomsreviews2386 ай бұрын
Must be using the stock follower not a S&J. Your not using the Special magazine spring that S&J supplies with the kit. They are tapered to fit into the poorly designed S&J followers' What a bunch of BS. It's called "bait & switch"
@04BlueSmoke6 ай бұрын
I am using the S&J spring that comes with the kit. I already trimmed it to length.
@tomsreviews2386 ай бұрын
So you are saying that the entire spring is tapered? I bought the follower as a stand alone piece. I could not find anything on your web site or videos indicating that I needed to buy a spring also. All your site said was that it fit a Mossberg 500 shotgun.That's why I bought it and it doesn't work.@@04BlueSmoke
@04BlueSmoke6 ай бұрын
@@tomsreviews238 send me an email to [email protected] I will help you with a spring.
@tomsreviews2386 ай бұрын
If that's an S&J follower being used, keep in mind that a 12 gauge spring does not fit inside it. You have to stuff it in with a small screwdriver. It deforms the spring and seems like it could cause reliability problems.The follower just floats freely in the mag tube if you install it the way it's done in this video. He just tossed it down the tube and the spring just sits on top of it (not in it). I tossed it in the trash. A very poor design. It's also expensive.
@04BlueSmoke6 ай бұрын
The springs that are included with the kits have tapered ends. They do fit inside the follower perfectly. Some gun manufacturer mag tube springs do not have tapered ends. That may not fit correctly.
@tomsreviews2386 ай бұрын
My shotgun is a new Mossberg 500, the magazine tube spring is stock. I was sold a follower that is only compatible with the S&J spring. They sold me the follower alone and nowhere does it indicated that it is not compatible with the stock Mossberg spring. They leave that fact out on their website and videos. @@04BlueSmoke
@tomsreviews2386 ай бұрын
Just got one of these to install on my new 500 with a stock spring . The cylinder wall thickness of the S&J follower does not allow for the spring to fit easily inside it. The inside diameter is much smaller than a 12 gauge. The stock follower and the aluminum type, allow the end of the spring to easily fit inside. I needed to stuff the spring end into the S&J follower with a small screwdriver. The follower seems to work but deforms the spring. I don't like this design at all and it also costs more than most. Seems like it might cause a reliability problem. This problem should have been obvious to the manufacturer. This follower is getting tossed in the trash.
@SOSdoorgunner696 ай бұрын
no workie!! falls off
@richardcornett15616 ай бұрын
Do you have a stock for a hondo 12 gage
@user-wz3vf5mh7x6 ай бұрын
Is there a extension for a escort slugger in 12ga?
@bwilson027 ай бұрын
Will this work an a Dickinson Arms 12ga? The XX2t model?
@timmillheim57967 ай бұрын
Got my adapter a few weeks back after calling and talking to Scott. Answered all my questions so took a chance on my first gen Charles Daly Field Tactical 12g. Worked as described. Adapted a Bkackhawk Knoxx for an Remington 870. Looks and feels a lot better for my small frame.
@ewok7007 ай бұрын
How do I order up the Kit?
@catfishredneck887 ай бұрын
I bought a tactical one 6 months ago for $149. today I got a regular model like this for $129. I had just received a gift card free for $60 from buying a .357 magnum. (black Friday deal) they gave $20 on card for every $100 spent. so after the gift card I got this one for $80. so I have 2 12 gauge pumps for $230. WOW!
@3vpme27 ай бұрын
I just received this, watching as I install on my 590A1 this is good quality
@ChiefLilly717 ай бұрын
Just found your video! Just went over before the video was over and ordered the Mod 3…yours is priced right and you don’t have to completely dismantle the gun to install!
@funkycoldmedina677 ай бұрын
why have screw down and not up?
@Jared_Albert7 ай бұрын
Thank you very interesting
@Denman500.7 ай бұрын
My 320 has never failed.
@SOSdoorgunner697 ай бұрын
How can I get in touch? mine no worries. falls off.
@nikwhite45987 ай бұрын
Are you still able to put on the front picatinny rail section that comes on the Winchester SXP Extreme Defender FDE Tactical Pump-Action Shotgun with your extension +2 ?