Thanks for this tip! Just a heads up - I didn't have any luck with tapping the RADIO #2 fuse you mention in the vid, or the ECU fuse you mentioned in the comments - neither of those seem to have power with the key off (at least on my 2003 SR5). Using a test light, I identified POWER NO. 2 - 3rd row in, bottom fuse - 25a - as having power even with the key off, supposedly this circuit is for the front door lock system. I tapped this one and ran a wire over to the PWR OUTLET fuse and now all 3 of my outlets (2 up front, 1 in the trunk) are hot all the time! Super stoked for this as I'm about to go on a camping trip this weekend and now I can charge my phone while I'm hangin out

"Smoky campsite, mosquitoes won't bite" Got it!

The fact they would have you climb through that storage area to winterize it shows how little they care about the customer 😂

what about put a electric actuator with remote control?

This just happened to me today in my 2003 tundra sr5 found the green plastic and everything thanks alot thought I was dealing with some electrical problem

I'd be doing probably 33s at best, but 35s look the absolute best on a full size like the Sequoia

I was able to get an 01 with 245k that was hidden under a shed. Paid $2000, put a battery in it and drive it home! Nice vehicle!

Wooow awesome, thank you!

What’s the width of the drawers?

aint u the hvac guy

It was about 11:30 at night on Saturday when my son saw his brake lights staying on. Your video gave me the temp fix needed until I could get the part or find a substitute. Thank you so much from a mom who is not a mechanic!

Hello I just wanted ask you Where did you get that little piece , that is a great idea and I want to try too Thank you

Thank you for sharing this! Time to go fix mine.

Little bit more in fuel ?? 😏 toyota fan boys cant count . My bmw x5 gets 23-26mpg my friends 4runner gets 15-17. If you actually count its about 10k$ over only 100k miles . Basically you buy slow and boring car but at the end in reality any modern car would cost you less over many years even if its not as reliable. DO THE ACTUAL COUNTING . Thats why toyota fan boys never talk numbers !!!

Can we hire you?

I used this idea. But used an angle brace for wood. Works great

Anyone ever have an issue of a clunk noise from the shifter area after replacing the stopper?

What did you look up on Amazon to get that piece

literal life saver ty so much i was dealing with the same problem

Have you had any issues with the fasteners becoming loose or wearing out from off roading or the weight of anything hanging off the rack, i.e. awning Thanks.

Where did you order the part you added and how much did it cost?

Thank you so much.. I have a 2002 honda crv and it did the same thing. Checked out your vid and it was that. I saw plastic parts on my floor mat. I put a piece of cardboard with tape until I stop by autozone to pick up the part.

My man I thought it had something to do with the break peddle and checked that before your video but didn't realize it needed that plastic there and what do you know I found that plastic your talking about! Thank you so much your the fucking man!

This is next level. Absolutely awesome!

Great idea! I need to build one!

Same situation here...I was headed to work, came out to start up truck, and had no power... ok I thought, get my battery pack charger and charge my battery. Didnt notice my brake lights were on until it became dark outside... Then I scratced my hea s puzzled to what waa was going on. Checked fuses like one would do first, all checked out... Searched out youtube and saw your video... I laughed so hard when you mentioned the little green plastic pieces... Thats exaclty what I saw on my floor board the afternoon before.... I thought it was something I stepped in and didnt think twice about it..... I piked up the pieces and threw them away.... Now I know.... I feel excited now.... Thanks for your video Sir....

Great video. Just an fyi depending on your car the piece could be a clear rubber, my Acura TLX was.

Very useful. Thank you....

I literally paused the video at 2 mins looked at my floorboard and there's that same piece snapped right in half under my pedal 💀

I have a 2005 Sequoia This was the problem on my car, there were 2 brake stop pads I replaced both Lights Off

Earned a sub👍👍👍

Mine is rattling as well, from the same place, i got a outlander 2020 with 90 hours on the clock. That shit is embarresing for Can Am. Wonder if the fact that it is made in Mexico has anything to do with it. Surley they must test theese before they are shipped out. I noticed on a few forums that they sound like this brand new. Thx for the info, ill check the spring tomorrow.

If the plastic is there then you can't do this.. so I'm guessing this is after you have gotten it open . Or fixed

Where did you get that latch? The link does not work.

Went to my floor board and yes saw the green plastic buttons broke great vid thank you

Anyone know what the bolts he used to connect the bars are called ?

Thanks I wish I would have seen this earlier. On my 3 fucking time repairing this door latch. So frustrating. This is awesome!

Thanks for the video

Awesome build, where did you get those fasteners?

Fellow Utahn here ✌️ About a week ago, I just picked up a 2005 SR5 sequoia. Loving it so far and I have some plans for it. It's already equipped with front and back upgraded suspension and rear springs. Front struts. Changed ball joints. changed timing belt. Cool vid cool rig 👌

This is awesome! Can I get this part or do I have to make it?

When seen that in the floor bord I thought someone been eating candy in my car and it was green lol but now I know what it was thanks for the info

OEM Latches are NLE

This is a common problem on Hondas and Toyotas

I have two lithium batteries on my trailer and I mounted them under the bed up by the side of the hot water heater so I can store my trailer hitch and load bars up on the tongue where the batteries originally were

I also searched for fuse to shut off my brake lights and found this video and sure enough I found the broken plastic grommet. Thank you for posting this great trouble shooting video.

Bro. You made my day. I wish I could venmo you some $$ and buy you lunch. Thank you!

I think I missed something, why are you including the cable with the install of the bypass? So that you can open from the inside? I am thinknig about getting this but I prefer not to install the cable

same here with rear door latch. i got the amazon metal one and the arm that pulls the cable bent. i took it out and slightly over bent it back, and fastened the cable more securely to the door panel to get a little stronger pulling angle. have been gentle with it and its been working great.

Thank you so much this was also the problem with my car but instead of the rubber falling off , the little switch has dug a hole thru the rubber making it not press down!