2:50 Tail Stock live-center, tapered shaft. 3:33 Faceplate, mounted to spindle. 4:32 Spur center, headstock. 'Spur center' drive side, 'live center' tail side.

How nuch sir?

Very nice good job.

in my kit that didnt come with instructions i noticed two blue wires one light blue that was obvious match but another was w the pos and negative cable what does that go to? Im getting power to lights but no motor turning yet i think its that wire but not sure where it goes please help

Sounds like it’s missing on one or more cylinders…

I’ve got one of those that came to me from my mother’s uncle when he passed in 1950. It came chambered in 250-3000 and has the quarter twist take down which is a little sloppy, I’ve never sighted it to see how this affects accuracy.

Buenas tardes me puede decir dónde lo compro

Add toolboxes for grinders, vises, gloves, helmets, torch box also. Space to carry pipe or scrap metal. Wrap your extension cords. That's how I have mine. A 😇

I brought that same pig roast and it doesn't turn the pig fully around .. what a waste

What is the model number of this?

I'm doing a build with the 72v 3000w motor. There have been complaints of the motor overheating and then dying. My guess is the lithium batteries that people use is making them faster, but the high discharge is causing the motor to overheat. Some people are enlarging the holes on both ends of the motor. This works well if it has a built-in fan, but from what I've seen the 3000w motor doesn't have a fan ( strange I know). I'm planning on using a 100mm 12v Seaflo in line boat fan with a electric bike 72v to 12v step down transformer (perhaps with 4" k&n filter on the end to keep dust out).

Where did you order your parts from?

Hi nice video but could you add in km elevation and difficulty

Knowledge is power! As with anything unknown it seems a mystery until someone comes along and explains the simplicity. Thanks! Now I can take down my 99.

How are those motors holding up?

What is the maximum length of a lamb or pig that you can put on it?

My only advice with a barn find welder or one with a unknown history is to remove the main armature cover (belly band) and remove any debris that could get would up. Do this prior to cranking the engine.

Can you do iPad OS 16??

100

Great video. Easy to consume, it’s actually beginner / inexperience friendly and straight to the point. I would recommend this, to anyone just starting to get into woodrurning and picked up a WEN lathe. As well as those with experience, but looking for reviews/what this lathe can do.

Great vid, Skied there, the generator and lodge were burnt down by vandals ,was run by a not for profit type of people. Thanks for this.

one of the first things I add to every trailer, welder or not, is 12v LED lights so I can see at night. I use pipe to make a base and just another smaller size to fit in it so that the light can turn, they swivel on their own supplied base that I attache to the pipe stand. having lights at night is imperative. the ones I use also double for another pass-time, fishing. its a big thing on the Gulf Coast to fish at night under lights from docks, bridges, piers, etc. The LED lights work fantastic and dont use much juice at all, this means you can run 100's of feet of extension cords to light them up.

I have a model 99 savage 250/3000 my Dad had it Love the gun.

I heard when u wire it in reverse it doesn't have the same rpm and torque?

Does the 1800w version have a fan blowing air?

I have been looking for a way to improve upon the alaskan mill. This is the first real contender I have found! I like the concept! Would want to see the log holding and adjusting mechanism improved though. 🙂 Anyway; great idea, and great proof of concept! 🙂

Thank You for making this. I just inherited a model 99 take down and your video helps a lot.

Hey, can you say me please if the 36v 1000w motor is the same as the 72v 3000w motor and its have only another controller and voltage? I have a battery and a controller so I need only the motor and I'm afraid that its not the same motor... thank you very much 🙏

Is there a on and off switch on the throttle?

Mabe put a better chain guard on the chain as if it snaps it can take your arm off.

do you know if i can use this motor in a large remote controlled vehicle using the speed controller it came with

I have the same kit and I cant seem to get it running, would you be able to help troubleshoot?

Nice work. I have the same motor and speed controller like yours . But i have one problem, the motor have the full speed on the left turn and the low speed on the right turn so I can't put in my bike because with the full throttle goes reverse . Do you know how i can change that?

This is my first go at wood turning! thank you for the video!

Trying to put this kit on a small old garden tractor. Your my hero, I'm super confused tho. Thought I had a good grasp but perhaps not 🤨. Need to leave the 3 speed switch in low power mode, as far as the "on off switch it's just a 2 way toggle with the orange and red wires right?

Would you say they have decent power? I picked up a 2000w one for a garden tractor electric conversion idea.

my father loved the 99 and before he died; I gave him the original 1899 made for this cartridge. Checkered trigger, perch belly stock, tang sight and takedown.

Hi good videos This motor compare yo sssmotor of they dame power which is they diference

What size socket do I need to remove armature nut

Thank you so much you have answered my questions for the speed controller

can you help me convert a 36v electric dirt bike to 48v with the same controller i bought from Amazon

I like the rustelouem Hammerite green & black paint cover dinks and gouges on the trailer I think I used the small block Chevy axles mine has a heavy duty. Square tube and because most of my trailers still run 8-145 mobile home wheels due to a fact I have a connection with a trailer I have new tires on all and get them mounted $10 I good my brother has a 8 lug 3/4 ton Tim's with wide tire as he off road use

Where do you buy the chain and sprocket say for a bicycle?

Very helpful! Thanks so much!

You need a tripod

10,000 lb axel ?

does this come with a battery?

Het man love the video, I had a couple questions...1 How many amps were each of those batteries? 2 Are both the motors running off of the 4 batteries? Thank you for your time. Keep up the good work.

What is the actual rpm?