Where can i order that book at

Some people say the engine oil on a motorcycle or scooter should be checked with the dip stick screwed all the way in, and some say it should be checked with the dip stick resting on top without screwing it in. Which is the correct way?

Thanks so much for the help, I just watched it to put back the light switch that fell apart when I changed my cabin filter! 😀

You have tipped your mower over on the wrong side… never tip towards the carburetor…!

Hi I want to do exactly what you’re doing but I don’t know what to buy to replace the pet so what is that called and what size is it and where can I buy it and I really appreciate it. I’m going crazy with my scooter so thank you thank you thank you.🛵🛵🛵🙋‍♀️💥💥💥

How can I test that 🙋‍♀️🌈🛵🛵🛵

One question: Does this engine use mix gasoline or regular gasoline

Yes these are all American sockets its the 60s no metric

That's a shear pin

always use a wrench- not pliers as seen here- you'll wreck more than you fix

I have this exact engine. I purchased the repair kit. The carb is leaking fuel from the air intake face of the carburetor. Any ideas as to what is causing this?

I think your peacock was pretty bad I don't know really cuz I thought I followed you with that cuz I have no pressure tester peacock was nothing wrong with it feel for with gas but it starts up and then it dies is my problem then it starts up again and then it dies

Thank you so much, i needed those instructions for in a few days when me and my friend are gonna install a new belt onto my agility 50. So, thanks!😃

At first I thought it was my fuel filter but when I noticed that when I turn it on fuel but then it'll start up and eventually it dies I'm pretty sure it's not my spark plug so I know it's something to do with fuel so I have ordered a new peacock and hopefully this solves my problem it just won't start running when I first purchase it I didn't have any problem then I let it sit for a long time over winter and when I try to start it up it didn't work it just doesn't stay on I wish you did share the shut off valve it's like one of those lawn mowers when you're done with it you just turn off the valve and it protects the gasoline from being gooey

Im going to attempt this due to a flooding issue im having. I appreciate you putting this together

Smart fix

I have done this many times but this time I noticed no rubber cover on the left side of the glove box like the right where thr nubs are. Also on the right side have a long tension plastic piece about 6 inches. I can close the glovebox, almost, and think one or both of these is why. Any ideas? Grateful for any insight- Jon

Dear friend,I am having the same issues with my scooter,I replaced the vacuum pump, the scooter starts but it shuts off when I gas it,so I’m going to follow your steps and re do the gas line and hopefully all will be working good,thatnks it it a great tutorial.

Put it in forward gear, and give it full throttle. That reveals the screw enough to take it out WITHOUT pulling the flywheel. ;)

Also if you dont mind telling me how many turns did you back out that adjustment screw

nice video!Great detail and explaining.Would you know where I can get the little 90 fitting on that short hose?I broke it by accident.

Thank were the air intake valve go on the carb does and the other just close off

Both front and back don't work, won't even indicate that the right or left signal is working and I hear a buzzing noise underneath the steering column cover. Could this indicate a bad relay or bad turn signals switch?

I've had this unit for about 6 months and I'm more than happy with it. It fills fast, is very easy to move around although the manifold disconnect sticks out to one side and it would be easy to bang that into something and break it off. The regulator handle is notoriously weak on all of these HF compressors, so don't bear down on it like it's a lug nut. Be gentle with it. The best aspect of this unit however is the sound level. You can stand right over top of it and have a normal volume conversation. My gf can't hear it when she's upstairs watching TV or working and that makes all of us happy.

Good video. You made the point very well. These things are not good or outright terrible.

A great cheap dip to clean your carbs is 1/2 pine oil 1/2 water mixture. Put it in a crock pot to heat it up, or use an ultrasonic cleaner. Rinse with hot water and blow dry with compressed air. It's an old timers trick I learned from working on vintage motorcycle carbs in the 1970's honda forums.

Do you know what that threaded hole at the bottom front of the carb bowl is used for? It appears that there's not anything in it in your video and mine appears empty too. I'm not the original owner, so I'm trying to figure out if anything is missing. Thanks!

Working on my Kymco People 50cc, and this helped me visualize what I need to check. The previous owner had "replaced the tires" - and he did a good job, but said he lost speedometer after this. I checked/replaced fuses to be sure, but this video is a perfect explanation of what I'm looking to check now. Thank you!

Is the bolt for the clutch at the back side of belt is it reverse thread can't get my bolt off

It's a reason why the carburetor looks odd...the low cowling. It's also the reason why it will run like shit if you have any ever-so-tiny exhaust leak, as the cowling will fill with exhaust gases and smother the engine.

Why would my coils be arching on 40 horse mercury 2 stroke

throttle cable ? how do i connect it. sorry for bad english <3

I have two scooters. 2008 Jonway scooters. I'm not the first owner. On one, there is a petcock with only two heads. I can see down by the tire that there is a line hanging down. I can't attach it to the petcock since there are already two lines going there. It has been like this since like 2016 but I just noticed it. The scooters have sat for a while. I fixed everything possible by KZfaq and they are running well now. What do I do about the petcock, the two only heads and the hanging line?

do you have the service manual for this motor? I have the exact make/model outboard and am looking to find what fuel pressure should be when cranking. I think i have boiled it down to that one issue. thanks for the videos!

Why are you wearing your elegant shoes for this? You're going to ruin them.

Please help. On my Vespa Primavera 2017 turn signal don't work. Neither the front or the rear blinker on the right side

I'd really like to see more of this style engine. Especially the 4cyl ones! I've heard people say the 4cyl was the best engine made

Thanks for the video

Great job Fyi you can buy a puller set at Harbor freight For about $15, i used it yesterday and pulled the same flywheel that you're doing

Thanks man you're a life saver , I think the mosquitoes lifted me off the ground

What is the part number for the fuel pump kit?

Nice video

Three things. You can thicken the gel coat with micro balloons, or silica. Makes it stick better. Also, epoxies like gel coat can change color as they harden. For the final coat of gel coat you need to use gel coat with wax, as you said. But, you can use wax paper to smooth the final coat. Works like magic. You don't need to sand and polish near as much. Oh, and by the way, Spectrum makes gel coat repair kits for a lot different boats. All in all, you did pretty well.

Where’s the key

Will a slightly shorter belt make it faster or slower

A GREAT VIDEO THANKS

Здравствуйте,какой должен быть зазор зажигания?

I had no idea how simple this was. Never paying anyone to do this again. Thank you for the simple, clear instructions

Nice modification to bypass the vacuum petcock.

Where did you get the carb kit?