Man that old disc looks brand new.....compared to mine
@bobettel124310 сағат бұрын
I have a 2016 Range Rover Sport HSE. The electric steering is simply quite a bit stiffer than normal and of course gets easier to turn once traveling at slow or moderate speeds. No grinding, no whining noises, no clunking, no drivability issues or codes coming up on scan either. So absolutely no other symptoms. Any ideas ?💡
@madhatter5331Күн бұрын
Hows the cover on the highway? Any shimmying or movement? I just picked up the same one you have. It sounds like a solid investment.
@billhoggy4461Күн бұрын
Great video and thank you i am going to have a go at the arches on the back of my mk7 transit
@BlastReadingSeriesКүн бұрын
Is everyone else reinstalling with dialectic grease?
@lindauernheim6642 күн бұрын
I have a 2010 Honda element when I try to lock the car the alarm goes off .i changed the battery still sets the alarm off when i try to lock .please help
@MD-ot3nl2 күн бұрын
thanks, guy! this was a great help in installing a similar radio/camera in my 95 ranger. Great video!
@Technaci0us2 күн бұрын
Boss man 💪
@poonam8333 күн бұрын
Jane ka samay ahh ghya hai mere
@svietaking64723 күн бұрын
Thank you !!! This advice saved me
@NadiyasultanaAhki3 күн бұрын
Thanks ❤
@DemetriusBell-sn4qd4 күн бұрын
Why wont sunroof open all the way. It stops a third of the way back
@Royce19824 күн бұрын
Spider at 2:24 lol
@jessiebeam34344 күн бұрын
Thank you straight to the point!
@timsherwood28044 күн бұрын
Straight to the point no excessive talking, music or explaining. I had my brakes bled and working within 10 minutes
@sniperpaintcorrection67904 күн бұрын
I don’t have a radiator cap. Do I do this on the coolant reservoir?
@marlonoriley88214 күн бұрын
Been 5 yrs this video was made. I’m gonna let this 90k mile, 11 yr old Hyundai cool down and try this out. Car gave me a code for the map sensor failure but I know a misfire when I feel one. New oem sensor didn’t help so I’m Changing them. Manufacture say to replace at 105k.. I’m ranting atp. I’ll send an update once it’s done,
@RyanFish8254 күн бұрын
Man’s a beast with that little hand bender. OEM status.
@71502855 күн бұрын
Is the vent a one way valve??? That only lets pressure out of the diff??? Even when driving through deep water. The cap will still prevent water from getting in right???
@meetmahiteach16855 күн бұрын
Nice vdo
@GrandePunto8V5 күн бұрын
Easy solution (but most people will still argue, they prefer brutal methods later: hammer, puller, torch etc.). 1. Paint the hub with zinc (or aluminium-zinc) spray. No rust. 2. Chamfer (ideally on a lathe) the drum, so the lip does not form.
@ThisIsDrM5 күн бұрын
So clear. Thank you. I watched this video twice through before changing the oil and as I changed it. Incredibly clear, detailed tutorial.
@RandomMichael5 күн бұрын
Thanks!
@erlandskoglund74915 күн бұрын
Now i feel very confident i can do this my self, thanks!
@Randomfellow99525 күн бұрын
Didn’t work on my 2014 Qashqai (I guess my Qashqai wasn’t fitted with the horn chirp)
@motov8-garage8327 күн бұрын
I just got a new 80$ Maddox brake billed pump kit. It won’t go past 20, then very slowly leaks down, it don’t leak down at all at 5 but 20s all it can handle apparently.. so hopefully I can get it sealed better or 20s good enough lol..I got a few months ago so I hope I can get it working good because this things in returnable now😅. I’ll try soap and water and check the whole thing in the pressure mode obviously (this one does both vacuum and pressure)
@JuanhCjbhvnbtrf7 күн бұрын
Nice informative, detailed, and well explained video. Great work!!
@ericflores69557 күн бұрын
The factory radio in my old Tacoma stopped working a few months ago. So, I found a nice, used factory radio on Ebay and bought it. Your video was very helpful in me changing out the radio with no issues. Just wanted to say thank you!! Note when buying an used factory radio, you will most likely need the two mounting brackets from your old stereo for the replacement stereo. Couple of screws hold the bracket to the radio.
@biglouie757 күн бұрын
Thank you for the video. I am having electrical issues with my 08 dodge 1500 . I replace the battery,alternator and the starter. It will turn on for about 4x during the day then nothing.. just click click… I am frustrated. They said change the ignition relay but it’s seem my truck doesn’t have one or I just don’t k know where it is located. Can you help me
@johannjohann65237 күн бұрын
Thanks for the video, one thing regretfully about this bleeder system, the instructions suck. At least mine did. luckily, I had it right all along. But, I still like to make sure before I start working on my car. It's important when you do work on your car, to first do no harm and make things worse! :)
@johannjohann65237 күн бұрын
Just like with their transmissions, people do not ever change out the brake fluid in their ABS system thinking the stuff lasts forever. Then the ABS light pops up and the brake pedal goes to the floor and fails to stop the car. Brilliant! The brake system will nearly last forever if you change the fluid. And getting a vacuum pump like this allows you to work on your car and save money both by skipping the repair shop, and you are providing the labor. This tool pays for itself the first time you use it, and you don't get brake fluid all over your driveway. Now that is Brilliant! All ya gotta do is change the fluids in the brake system and transmission every 60K-75K miles, and your car won't break down. Promise.
@affluentishmael10457 күн бұрын
Hey there, what type of gloves are you wearing?
@SamPatel-bk7nm8 күн бұрын
Maar diya Bhai tune meko alvida 😂😂😊
@steffman8 күн бұрын
Thanks
@mikareinholm3378 күн бұрын
What is the torks size?
@christiantroy77228 күн бұрын
Not bad for just using scotch bright and a polisher designed for paint
@saeiddadash3258 күн бұрын
0,00
@BRORANDYMARTIN9 күн бұрын
Do you put the cap back on the master cylinder before you bleed them ?😊
@wikwyre9 күн бұрын
GREAT video with all the info one could possibly need. Now to go work on my car :)
@joeandersen65539 күн бұрын
I in a place where I need to make one Home made
@chrisrodriguez76729 күн бұрын
So you don't grease up the inside at all, just the bearings?
@Parymary-ix5db9 күн бұрын
Very Useful 👍
@Itz_meee0109 күн бұрын
Thanks, gonna need that if things get worse
@skippyglen66109 күн бұрын
Just done this on my 2011 UK model C30 and was identical to yours. The reason I needed to remove mine was obviously somebody had been in there previously and did not line the top clips up correctly as you pointed out, so the top edge of the door card had a hump in it. So many thanks for posting this.
@Eclectic_RN10 күн бұрын
2010 This Does NOT work
@fender.munoz710 күн бұрын
93 for rangers are different
@rmhbernoff11 күн бұрын
I had no idea it was so easy! This will be way cheaper than getting it changed at the shop. Thank you :)
@4DIYers10 күн бұрын
You are welcome!
@SuperGlobalKiller11 күн бұрын
I tested the temp sensor like you said on 6 different cars, same amf types, i get no readings whatsoever, bo sound when doibg the beep test, am i doing it wrong or are they all broken.
@4DIYers10 күн бұрын
Have you touched the probes together?
@SuperGlobalKiller10 күн бұрын
@@4DIYers the two outer probes yes, multimeter on ohm 2000, also sound test, seems like no connection in any of them. I do not understand, can’t imagine they are all broken. I’ll upload a video tomorrow where i do it live, you can judge if i’m doing it right. Thanks for answering!
@jerrycanoinsa935512 күн бұрын
1 and 3 are the exact same thing
@4DIYers10 күн бұрын
They are not. While a pickle fork was used, it wasn't working in method 1. So instead I hit the threaded stud with a hammer.
@DanielDGordon12 күн бұрын
very informative. This helped me repair my 97 explorer today. Thank you for the very good video details.