Kazier Kreations

Пікірлер

@montyyeager1117 Ай бұрын

Great tutorial. But I do have a question. I followed you step-by-step. When I created the air vents and the injection port, then turned my body 2 on the cut out only appeared in one side of the mold. What did I do wrong?

@Iamtherodlight1453. Ай бұрын

So awesome.

@petethompson6689 Ай бұрын

Glad im not the only person with some minor issues on setup! Just got mine and am super happy they updated the build plate and filament input. Big improvements from the early youtube versions out there. When calibrating my build plate went lopsided and wouldnt finish the set up. Of course i freaked out and wrote to customer support which they got back within a few hours. But it fixed itself when i accidentally started a print, the build plate levelled out perfectly. Ive been using AnyCubic PLA Plus and its been amazing every print. Cant wait to try my ABS next

@adrewfis925 3 ай бұрын

For the love of Christ compels us, because we judge thus: that if One died for all, then all died; 15 and He died for all, that those who live should live no longer for themselves, but for Him who died for them and rose again. 16 Therefore, from now on, we regard no one according to the flesh. Even though we have known Christ according to the flesh, yet now we know Him thus no longer. 17 Therefore, if anyone is in Christ, he is a new creation; old things have passed away; behold, all things have become new. 18 Now all things are of God, who has reconciled us to Himself through Jesus Christ, and has given us the ministry of reconciliation, 19 that is, that God was in Christ reconciling the world to Himself, not imputing their trespasses to them, and has committed to us the word of reconciliation. 20 Now then, we are ambassadors for Christ, as though God were pleading through us: we implore you on Christ’s behalf, be reconciled to God. 21 For He made Him who knew no sin to be sin for us, that we might become the righteousness of God in Him. 2 Corinthians 5:14-21

@chadharding8216 3 ай бұрын

There is a handle on the bottom left of the door.

@uGoTjHaCkEd 2 ай бұрын

Bottom right

@adrewfis925 3 ай бұрын

@RustyInventions-wz6ir 3 ай бұрын

Just found your channel and subscribed. Very nice mill

@kazierkreations9382 3 ай бұрын

Thanks! I have a cheap power drawbar video maybe coming out later next month, still finishing the adapter plate so stay tuned!!

@jamesmason7124 3 ай бұрын

I am currently trying to save up enough money to buy this printer before the early bird sale ends, I have like 300 dollars saved up now but I won't get anymore money until June, I live on a very fixed income and I'm disabled. Do you have any idea when the early bird sale ends??? Thank you and God bless you and America

@kazierkreations9382 3 ай бұрын

I have no clue, I'm not affiliated

@agelualofa 3 ай бұрын

Hey brother thank you for this video. I’ve always wanted to get into making lures. Stickbaits

@photo_n_art 4 ай бұрын

Gee weez, how the hell person like him is able to operate the printer is beyond me... If you were trying to be funny you totally dropped the ball 🤷‍♂️ You have missed imput shaping calibration, you have not fully loaded the filament... just read the manual

@kazierkreations9382 4 ай бұрын

who knows... the world is a strange place

@kazierkreations9382 4 ай бұрын

wait, did you have a different manual that told you to do all those steps? im still looking for the z axis zip ties that they said i needed to cut, and the foam block under the bed......

@NoMercyFtw 4 ай бұрын

Should be getting mine end of the month

@kazierkreations9382 4 ай бұрын

as much as i've seen now a lot of people hate on the machine, it's actually really good. and tech support has been a peach!

@emanggitulah4319 4 ай бұрын

I did the right thing, buying a Bambulab printer. That tutorial was not very inspiring from their side

@kazierkreations9382 4 ай бұрын

i wish i had the $ for a bambulab printer and the filament changer, i asked qiditech if the fillament changer was in the cards for the future, and was followed by a straight up "we cant tell you anything at this time"

@veegee24 4 ай бұрын

sum-ting-wong brands don't update manuals. They can barely speak English lol...

@russiancommy 4 ай бұрын

I'm having an issue with mine crashing everytime you calibrate through the Slicer, Qidi just told me to stop using it....I'm hope it's fixed soon.

@nathankazier2267 4 ай бұрын

Interesting, yeah I haven't tried that yet, actually haven't done anything special but print... Hope they find a solution for you sooner or later with calibration.

@russiancommy 4 ай бұрын

@@nathankazier2267 im also having issues at 240mm print height, the wire running to the bed in thr back twists up and pushes the bed on the Y axis causing the prints to bend at the tip. can't even print a cylinder at 238mm height without it becoming crooked. good thing the time-lapse works, you can see it clear as day in the time-lapse

@kazierkreations9382 4 ай бұрын

@@russiancommy wow, i will have to test mine out and see, i know the wire you speak of, so im going to run some tests on mine

@russiancommy 4 ай бұрын

@@kazierkreations9382 updated the slicer. works now.

@terrym3543 4 ай бұрын

You forgot to do the input shaping

@nathankazier2267 4 ай бұрын

I am away for the weekend, but I'm going to look into this on Monday for sure!

@nathankazier2267 4 ай бұрын

I ended up doing it, that was interesting, didn't look into what it did, but it made some nice music for 5 min 😂

@nathankazier2267 4 ай бұрын

Input shaping uses fancy math to calculate what frequencies are needed to cancel out the specific frequencies your printer vibrates at - a bit like the noise cancellation technology found in headphones. By countering these uncommanded motions, input shaping can greatly reduce or even eliminate ghosting in 3D prints.

@Ozzie4Para 4 ай бұрын

I always wonder why do people always print a benchy for their first print? I like to print something small but something useful like a phone stand for my desk or something that I'm not just going to toss in the trash pretty soon after. lol

@nathankazier2267 4 ай бұрын

That's actually a really good idea lol 😂 never even thought about it

@photo_n_art 4 ай бұрын

They are doing it for a simple reason, the name "Benchy" comes from printing benchmark. Basically it is designed to test different aspects of 3d printing. Apparently most people (including you) are not a aware of its purpose and what to look for once it is printed. A simple Google search will answer your question... it's not that difficult. Why buying a 3d printer that you are totally ingnorant about it, it's beyond me 🤷‍♂️

@Ozzie4Para 4 ай бұрын

@@photo_n_art Wow, talk about overthinking a simple question that was asked. My suggestion is get off your high horse and simply ignore possible future questions like mine since they seem to annoy you that bad. 🤦‍♂️

@photo_n_art 4 ай бұрын

I had simple answer to a simple question, to bad you didn't like it 🤷‍♂️

@Ozzie4Para 4 ай бұрын

@@photo_n_art Say what u have to say to feel six inches taller.

@pyromonkee2510 4 ай бұрын

I don't have a printer yet but i definitely want to get into it. Would this be a good one to start with? I like bambu labs a1 but that got recalled so...plus i want to have one of these in my garage. I think this one would be great because of the heater it has so when it gets cold outside it wont mess the print up or at least i hope it wont. I want one thats also enclosed means how it will be in the garage so no contaminants can get inside. Sorry for the huge paragraph lol.

@nathankazier2267 4 ай бұрын

No your fine, for a first 3D printer I think it's a good choice. Compared to the first one I bought where I had to build it, it's miles apart. Highly recommend

@pyromonkee2510 4 ай бұрын

@@nathankazier2267 Thanks for the response!

@Benny-ty6sp 4 ай бұрын

In fact, when adjusting the temperature, just click on the icon and it will start going up without having to click on the "+".

@nathankazier2267 4 ай бұрын

Thanks for the tip!

@srknyxl 5 ай бұрын

I have a question about the use of servo systems in CNC machines. The CNC control unit told the servo controller to move 100mm in the positive direction to the X axis at a speed of 1000mm/min. This movement should theoretically last 6 seconds. So what happens if a new order comes from the CNC control unit before the servo system can complete this movement in 6 seconds?

@kazierkreations9382 4 ай бұрын

in a typical non-servo setup, the system wouldn't know and send the next command. WIth the servo motors, they know the signal and how long it takes, if it doesn't reach that and receives another signal, it will halt. Mach 4 works well with servos and that feedback loop better than Mach 3, so its just what system your using and how that servo feedback loop works. Mine just does the first one, (closed loop feedback) and if it doesn't move the distance it needs to, then it will halt. Some newer "fancy" systems will retry, then half, but im not that fortunate to have that type of cash.

@ronin2167 5 ай бұрын

I'm interested in your electronics. That seems to be confusing as everyone is doing something different.

@kazierkreations9382 4 ай бұрын

I used Tecnic Clear Path Servo Motors. I would recommend going over to their website, the customer support is fantastic and the people there are super helpful.

@popo5413 9 ай бұрын

Thank you so much nice and slow good commentary love this

@Armedlegally 10 ай бұрын

I'm so happy I got my PM-1440 all together about 8 years ago. All I had to do is pick a spot and level it and hook up 220.

@gefflimlin6619 10 ай бұрын

The original Devlin plan didn't work the aft end correctly. I had one of these and it wouldn't come up on plane correctly. I called them and they told me to put some trim tabs underneath the transom.

@sinanethemoglu226 Жыл бұрын

bu rpm ye gelmen çok güzel inanılmaz muhteşem olması gereken bu zaten

@johndebrular979 Жыл бұрын

I have a Grizzly G4003 and I just rec'd this PM 1236 lathe from PM. They may have made in the same place but this one is much better. I got the one with the DRO, Cast Iron base & leveling pads.

@TenjinAerospace Жыл бұрын

Hi, have you ever figured out that Clearpath AGS signal? Im using Acorn CNC1 and there is a macro you can program for it to set 0 automatically once they autohome , but i wonder if there's a way to set home manually to not be all the way in tinbuck two at the physical end of travel

@kazierkreations9382 4 ай бұрын

Im so sorry for the delay, i just reset home on boot up, i dont send anything to re-do the home function but turn it off and on again :)

@zumbazumba1 Жыл бұрын

I bought same looking lathe but in green color -after all they are all made in china just rebranded . It came with poorly written manual and 0 assembly instructions.I thank you from the bottom of my heart for making this video !

@BeachsideHank Жыл бұрын

07:58- I bought an 1127VFD from them as a scratch and dent special. Matt gave me a good discount and the dings were relatively minor like your door issue. Came with a DRO and Q.C. toolpost system, I've been very happy with it.

@gordonbournival152 Жыл бұрын

Hi, thanks for the video, could be to make a tutorial video how to set and use the perimiter probing, will be really useful, thanks again

@tidalwoods7758 Жыл бұрын

Is there a way for people to contact you?

@tidalwoods7758 Жыл бұрын

Can you do a video of multiple Injection mold template?

@tidalwoods7758 Жыл бұрын

Fantatsic video! Do you do independent works for people? Would love to work with you on some projects

@ronsreadyornotshop Жыл бұрын

start cap is 2 micro farads @ 450 volts

@andersadler4779 Жыл бұрын

The tools you use in this video are they available in the free version as Fusin 360?

@DustinVang Жыл бұрын

Can't tell you how valuable this video is, Thank you a lot!

@troyareson8075 Жыл бұрын

Never mind I got it working I just had to hardwire the internet

@troyareson8075 Жыл бұрын

Do I need to install the raspberry pi is as well?

@deepwaterescue4u Жыл бұрын

A clip nut would work for the pannel

@rustyshackleford928 Жыл бұрын

Hi Kazier, I just found your channel. That is a great looking machine. I have a Birmingham 12x36 almost identical and it is a beast. Those PMs are super nice. How do you like it so far and how do you like that little digipass level? Thanks New subby!

@kazierkreations9382 Жыл бұрын

The Level is probably the most fanciest piece of equipment I own, it is expensive new, but I got mine used. Great overall

@foxden1219 Жыл бұрын

What engine hoist did you use?

@kazierkreations9382 Жыл бұрын

Just the standard Harbor Freight one, I believe it's a 2 Ton

@benjaminc1816 Жыл бұрын

I’ve just ordered the equivalent to this lathe from a uk distributor, how have you found it since you got it?

@kazierkreations9382 Жыл бұрын

I don't know how to describe how happy I am with this machine, it puts out more than enough power for any material I have thrown at it and I use it every chance I get. Well worth it.

@benjaminc1816 Жыл бұрын

Great video!

@kazierkreations9382 Жыл бұрын

Thanks! More random videos to come, been in editing for too long, need to just post. Thanks!

@exalosvids6012 Жыл бұрын

so i can take any model a face for example and cut it into the mold huh?

@kazierkreations9382 Жыл бұрын

Basically

@letscheckitout1985 2 жыл бұрын

Hey man!! Where is this belt kit from???

@jasonbell5905 2 жыл бұрын

Cast iron base? Really , that’s impressive for an import

@EngineeringHooksets 2 жыл бұрын

Very helpful! Thanks

@joat_mon 2 жыл бұрын

Thanks for sharing. I'm doing a CNC conversion on my G0704 now, and have a belt drive conversion in mind for the future.

@Tnj8228 Жыл бұрын

Same

@shadow7423 2 жыл бұрын

That’s exactly the lathe I bought except it is a rebranded model. I used an engine hoist as well.

@shadow7423 2 жыл бұрын

The base stand is not cast iron. It came with a 2 axis DRO. And it doesn’t have a hatch on the side, but has a cover that comes off. Coolant unit can only be accessed at the rear. It came all assembled and all I had was plug it in.

@Mike61259 2 жыл бұрын

You can see many details that indicate that it is not a new machine.

@larrybud Жыл бұрын

Like what?

@thebotformalityknownasdale2564 2 жыл бұрын

With a 2 dollar Lazer pointer a prizm a very fine measuring device you can get it to dead nuts that the aerospace industry would be satisfied with !

@BeachsideHank Жыл бұрын

I did this very thing with my PM 1127 VFD, worked a treat too. ☺

Ең жақсы KZfaq

Пікірлер