Thank you very² much... Bro... Using this video i fix/repair my LG Tv Web os, the problem is just the same i do the same practice like you did. And now the TV is working well like before.
@thokozanisengane167312 күн бұрын
Hi guys I have a problem with my old LG, the red light if I switch it on, because on but the screen remains black, I have been trying to take out the plug again and again but still the screen it off
@1977hos17 күн бұрын
Is it difficult to find a new ribbon cable by new one ??
@d1egofigueroa19 күн бұрын
Unfortunatelly the repair works for a couple of months, Id recommend u guys to take the tv to a shop to have the capacitors check on the panels he says to not mess with them
@anasichris430917 күн бұрын
Which capacity exactly.. please
@waltw705223 күн бұрын
Thank you bub
@everythinginfullspectrum862528 күн бұрын
This is a solution if you are ok with discoloration on the other half on the tv.
@desertseatingoceans29 күн бұрын
How did you take the bezel off? I have this TV and it won’t come off. There’s only screws at the bottom. Did you use a heat gun?
@berryscott8306Ай бұрын
Atan is amazing!!!🎉 fixed the problem immediately. Now I have a better understanding of the tv and how common the issue is. Thanks buddy! 🫶
@rupertyauАй бұрын
It seems that it is screwed at the place of red light senser, could you please show me how to open it?
@rupertyauАй бұрын
Good job! You are so easy to open the back cover after removing all the screws! I am also using a LG43"tv of model 43UM7400, but I found it very difficulty to open the back cover at the place near the light senser (it seems that there is screwed) could you please show me at this point?
@atanbajan28 күн бұрын
Hi there, you just have to pry it with a little bit of force. Dont be afraid to apply some force just dont overdo it because you might damage the buffer board
@BloODNoSeАй бұрын
Did this resolve the problem? I have the same problem on my subwoofer
@atanbajanАй бұрын
You have to replace some parts other than this part that I found shorted
@dannyholmvig7492Ай бұрын
I have a 42 inch tv that has been standing outside for a couple of weeks coz it suddenly stopped showing the picture, so I was gonna throw it away. But then I saw your video and thought I might aswell give it a try. My tv is a lot more complicatet that the one you showed, but I could still use the same principals as you showed, so I was still able to narrow down where the problem was.... AND IT WORKED 😀 Thank you so much for this helpful information 😊
@atanbajan28 күн бұрын
Im glad it helped you Bro!
@reynan218Ай бұрын
Hi can you help me. I tried your method but it keeps flickering
@jmservis2370Ай бұрын
kamera Thank you for sharing, the knowledge is very usefu
@atanbajan28 күн бұрын
Glad it was helpful!
@UltimaStealthАй бұрын
I have a r-112sw with same issue, havent disassembled it yet. When will part 2 come out? Where will you get part from?
@atanbajanАй бұрын
I haven't have the time to edit the video yet. But it's not just the problem. I have to replace capacitors and the surface mount IC that controls the main amplifier
@FabioMarrazzoАй бұрын
I also solved the problem, you are a genius and I thank you infinitely. The world will be truly free when tricks like this will be included in user manuals.
@atanbajanАй бұрын
Happy to help
@DarloCordero2 ай бұрын
Nice one bro..thank you for clear tutorial...can i message you directly?
@atanbajanАй бұрын
You're Welcome. We can just contact in here.
@pachecklouis182029 күн бұрын
It not work on my lg70 can I buy a new cable @atanbajan
@wowochua62202 ай бұрын
My lg 49u has the same problem right now which is black screen, sometimes the LG logo will appear and immediately fade. Can i replace the whole flex or ribbon?😊
@atanbajan2 ай бұрын
Hi, I think Your specific problem is different from this. And I cannot recommend anything if I haven't tested the TV myself. This TV I fixed dont show the Logo at all times
@jayredd56142 ай бұрын
Did u ever find the solution because if the lg log pops up for me it’ll work fine sometimes
@atanbajanАй бұрын
@@jayredd5614 I cannot really tell what is the problem unless I tested your particular TV. But here are some guesses that could be the culprit; 1. Leaky LCD SCreen/ Buffer Boards 2. Main Board Problem / Solder problem in the BGA ICs. 3. Leaky LED in Backlight Strips 4. PSU Unit 5. Loose Ribbon Cables. So as we can see it is really hard to say what is the problem if the TV is not thoroughly tested.
@anesthesiaelements84692 ай бұрын
I think you need to learn how to speak proper English before you start teaching people how to fix their TV
@atanbajan2 ай бұрын
Yes, Good Idea. Thanks for the thought
@cornellajoseph20532 ай бұрын
Try but no luck
@atanbajanАй бұрын
Im Sorry to hear that
@aslamnordin9502 ай бұрын
Wow.. Thank you dude.. Really appreciate it.. My tv back alive
@atanbajan2 ай бұрын
Glad it helped you bro
@dansgier2 ай бұрын
your lucky brother Good job!
@atanbajan2 ай бұрын
Thanks Man
@Laistrugonas3 ай бұрын
Good job my friend you save me 😅😅😅
@atanbajan3 ай бұрын
Glad it helped you Bro
@Sanjot25113 ай бұрын
I don’t know how to say thanks to you bro❤ because of you i fixed my tv. Hats off
@atanbajan3 ай бұрын
You're Welcome Bro! 😊
@kevinclark28563 ай бұрын
TRIED ALL THIS AND STILL BLACK SCREEN
@ayoubelbaioui80944 ай бұрын
Hello brother. Is there a way I contact you?
@nelchan24214 ай бұрын
Use Scotch Brite to clean the commuter bar.
@atanbajan4 ай бұрын
Thank you for your tip
@rudyc74884 ай бұрын
Disconnecting power worked for me. Thanks!
@atanbajan4 ай бұрын
Great! You're Welcome.
@JamesJihan4 ай бұрын
I personally appreciate the effort u gave to teach us your knowledge 🫡
@ebunohachukkie72765 ай бұрын
Can backlight issues be fixed ?
@loverlove63035 ай бұрын
Good job
@atanbajan2 ай бұрын
Thanks bro
@ukyawsoek50375 ай бұрын
Thanks brother
@atanbajan5 ай бұрын
You're Welcome Bro
@ALLOISSIE5 ай бұрын
Thank you very much. Tried this fix today and it worked. A sub is the least I could do 👍🏾
@atanbajan5 ай бұрын
You are welcome bro. And I'm glad it helped you.
@sirrawd6 ай бұрын
Omg it’s working 🔥🔥🙏🏽🙏🏽
@atanbajan2 ай бұрын
Im glad it helped you
@merlin39216 ай бұрын
If I replace the main board with a working one will that solve the problem? Or is the short not on the main board?
@atanbajan6 ай бұрын
The problem is not on the main board but in the LCD panel itself or the the COF ICs in the buffer board which are technically part of the LCD panel
@merlin39216 ай бұрын
@@atanbajan Thank you so much for the quick reply and the note about the issue with the LCD Panel. I've also seen people bake the main board in the oven at 385 F for 10 minutes but this is not likely going to fix my issue either. I was hoping that the short would be in the main board. Okay, I will try the taping method. Thank you for posting this video.
@atanbajan6 ай бұрын
@@merlin3921 thank you, I am pertaining to this particular tv model and problem though. Black screen can also be caused by the Main Board but if you follow the process in this video you will have an idea if it is the main board or the panel that has gone bad. Obvious signs of main board problem is that it wont respond to your remote controller and backlight will not turn on when you press the power on button.
@merlin39216 ай бұрын
@@atanbajan Hi Atan, I just tried disconnecting each ribbon cable and the whole screen is still "black" (dark grey) regardless which one I take out. Should I cover pins on both of them?
@merlin39216 ай бұрын
@@atanbajan The back light does come on when I push the power button. I don't hear any sound. It's just a blank dark "black" image. So this could be a main board problem?
@psyche14686 ай бұрын
what to do in case when both of the connectors are removed the blank screen does not change?
@simplethings98976 ай бұрын
I tried this and my tv still has no picture
@atanbajan6 ай бұрын
Im sorry to hear that. We cannot really make it work on some tv models and brands because of so many factors like the design of the circuit and the very electronic component that is causing the problem.
@skeinegh15366 ай бұрын
Sir please can I get your email I want to discuss a problem of my lg tv with you
@caswaldavis42876 ай бұрын
I will try this method
@atanbajan5 ай бұрын
All the best
@atanbajan5 ай бұрын
I hope it helps
@caswaldavis42876 ай бұрын
respect!💪💯
@atanbajan2 ай бұрын
Thanks
@ygbhat16 ай бұрын
Hi bro , it worked for my toshiba tv , how to permanently get this repaired . There are some horizontal lines on the tv but from far it’s not that visible
@sportsbreakcollections91116 ай бұрын
Thanks bro. Mine works though half of the screen where the issue is coming from is a bit dark(noticeable when movie lighting is bright) but a side from this, no other issues. I might have covered the good pins which you mentioned.
@atanbajan6 ай бұрын
Im glad it helped. Yes on some TV models we cannot fully restore the picture to perfect condition.
@stephenonyenagwa17626 ай бұрын
Just curious, why not change thr entire cable?
@atanbajan6 ай бұрын
We cannot just replace the cable because the real problem is in the LCD panel itself. What we can do is just block some connections going to the lcd panel.
@sherifelkhouly33454 ай бұрын
Can we replace the power board itself?
@azman47494 күн бұрын
@@sherifelkhouly3345 some problem caused by defectic lcd screen itself while other might cause from power board or even mainboard.
@user-ql9kj5sw7l6 ай бұрын
Αν γίνεται βάλτε ιποτιτλους να σας καταλαβαίνουμε και σε άλλες χώρες ❤
@dodejobi7 ай бұрын
Thanks a million for this solution. One third of the screen is now visible. What is that cable called? Can it be replace rather than masking some parts of the pin?.
@atanbajan6 ай бұрын
Nope, you cannot just replace the cable because the problem is in the LCD panel itself. What we can do is just block the connection that is going to that defective portion of the LCD panel that is why we cover some pins.
@TheXcorneliusx4 ай бұрын
Hello and thank you for your help with this nice video tutorial about problem with LG TV's. But it's possible to open and repair LCD electronic part inside display itself?
@davidjoshua40307 ай бұрын
It did worked for me today thank you so much! ☺️
@atanbajan6 ай бұрын
You're welcome!
@atanbajan6 ай бұрын
You're welcome! Glad it worked
@FireBlue-di5hj7 ай бұрын
Thanks u very much sir💯
@atanbajan5 ай бұрын
You are welcome Sir
@immaculateweimaraner93487 ай бұрын
Managed to fix it. Covered 2 pins and all is good but there is another issue..... Half of the screen is slightly darker and u can see that screen is gently flashing. Thats normal effects? Or maybe i coverde wrong pins. Thanks for any help. Regards
@atanbajan6 ай бұрын
That slightly dark and a little flashing could happen on some tvs and some model of tvs. Since different tvs have different designs so the pins that are shorted or has the problem has different functions and adjacent pins closest to it. That slight datk and flashing after effects are normal in some situations because we are blocking signals that are supposed to reach the LCD panel. There is 50 to 60 percent chance that everything will work perfect if we block connections going to the panel. Assuming that you covered only the pins that are needed to cover.
@No-one3797 ай бұрын
well played bro
@atanbajan7 ай бұрын
Thanks Man. I dont have the consistency of playing like this though