10 ай бұрын
10 ай бұрын
10 ай бұрын
10 ай бұрын
11 ай бұрын
11 ай бұрын
11 ай бұрын
11 ай бұрын
11 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@dougdishler2086 9 сағат бұрын
Somebody make a video for reliable XRT for somebody to don’t beat the fuck out of their RC. Just wanna take their grandkids out. Do a couple jumps and bats just baby stuff.
@reidlawrence1114 3 күн бұрын
First thank you for making the video, second you narrate a good video... but we have no idea what you're doing with the camera so far away in the dim lighting. We don't need to see you, we need the camera close up to what you're doing with light on the subject broski
@erikdravn 7 күн бұрын
I need these bolts!!! My garagelife bumper mount has tossed the bolts that I used. So it's all floppy now! Sadly, the link you shared is dead. :(
@sarversrc 6 күн бұрын
Try searching for wing mount bolts or pass through bolts. Maybe it will lead you in the right direction.
@erikdravn 5 күн бұрын
@@sarversrc I actually located the original bolt that came with it. Apparently, I used the stock bolts that were from the part I replaced. My bad. Now it's all fixed! :) (Thank you so much for this video though, it helped me understand my situation)
@reidlawrence1114 8 күн бұрын
Thanks for the video, good content but couldn't see a thing with camera so far away and poor lighting
@sarversrc 7 күн бұрын
I do my best to get an overview so you can see the whole car, and up close if need be or I remember. Just one man with one camera 🤷🏼♂️
@up50lut3 10 күн бұрын
So what receiver box is it? Never added it to the description 🤷
@sarversrc 7 күн бұрын
It’s a Arrma rx box. GPM has the part# on their website with the kit.
@geraldchilders2625 13 күн бұрын
I’m so glad you made this video I got gpm I almost did m2c but I liked the gpm look better I’m ordering a esc mount right now awesome
@sarversrc 7 күн бұрын
I’m really happy with it.
@geraldchilders2625 17 күн бұрын
I also just did this I also got gpm chassis braces and gpm shock towers boy she heavy now very nice parts
@sarversrc 7 күн бұрын
I want them in green and haven’t been able to find both in stock at the same time.
@geraldchilders2625 7 күн бұрын
I also had a hard time getting Bolth got some of eBay and some I ordered from gpm took about 3 weeks to get them I just got my M2C esc mount worked perfectly
@reaperjku 19 күн бұрын
love this video I would like to see more xmixx comparisons
@sarversrc 7 күн бұрын
Trying to get everything out and back in to it since moving.
@christinachristina9296 23 күн бұрын
You might have the same disease I have. It's called not stock syndrome. I built an xmaxx ultimate with to motor and ESC and an xrt with a low geared high kv hobbywing motor/ESC. Went and bought a used stockish xmaxx for playing since mine were too fast for my small yard. Here I go again adding more parts to make it better. It a very satisfying hobby but dam. I can't stop and I'm already an old man. Good luck brother and new subscriber.
@sarversrc 7 күн бұрын
Appreciate the support! I think I honestly enjoy researching, picking parts, and building them more than anything.
@christinachristina9296 7 күн бұрын
@@sarversrc same. Each one is different
@junkymustangs 24 күн бұрын
I prefer the locked diff. It drifts so much better on pavement than my maxx slash. You just got to know how to control the throttle
@sarversrc 7 күн бұрын
Fun both ways. But when it bites on pavement locked, hello rollover lol.
@stingerranger4942 Ай бұрын
Don't forget to put thicker diff lube if you going high speed
@sarversrc 7 күн бұрын
Believe I put 100k in it per an article I read. Thing rips
@stingerranger4942 7 күн бұрын
@@sarversrc the fluid is to keep the wheel from ballooning the more teeth you add you will get more acceleration and more rpm when you add the diff now the thicker one will reduce the wheel from over ballooning
@stingerranger4942 Ай бұрын
Put thicker doff fluid it will stay down
@sarversrc 7 күн бұрын
Got 100k I believe in it now.
@stingerranger4942 7 күн бұрын
@@sarversrc ohk try 500k
@weaselweasel8034 2 ай бұрын
What city is this in. Looks like the high desert
@sarversrc 7 күн бұрын
Bakersfield CA
@FullaBullz 2 ай бұрын
Have both the Sledge and XRT. Sledge is peppy but XRT is more stable. Biggest difference is I feel the XRT is simply more durable (have hardened metal gears in both) simply because the gear-train is mainly sealed whereas the Sledge it’s open to debris. What’s needed is an aftermarket part to cover/mount the pinion, spur, center diff, for the Sledge. What metal spacers are talking about with the XRT, what do they fix/prevent?
@sarversrc 7 күн бұрын
I hear cover would be nice on the sledge. Should be the Traxxas aluminum motor washers. Just stiffens up the mounting points and I’ve never had mesh issues. I believe this is why.
@jairosendsit8667 2 ай бұрын
Do those fans go into the rx?
@sarversrc 7 күн бұрын
Yes I have them to the rx. Can run off a separate battery if you wanted too.
@breakdown7153 2 ай бұрын
Whats your torque setting?
@sarversrc 7 күн бұрын
Stock on the sledge.
@thomasmallory971 2 ай бұрын
Which horn is that?
@sarversrc 7 күн бұрын
Believe this particular one was hot racing and has to be 25t
@jimpaulbarcena4259 2 ай бұрын
What motor support you hve. Nice rig!!!!
@sarversrc 7 күн бұрын
Got it off of eBay. Same company also sells a motor mount and believe you can get it as a combo pair.
@harlembrown2943 2 ай бұрын
How do we see what you’re doing from this distance ??
@sarversrc 7 күн бұрын
It’s give and take. Up close and you miss anything outside what’s zoomed in. Overview, and apparently people are missing some fine details. Trying to do my best and meant as a guide!
@parrinellojack 2 ай бұрын
Have you had any issues with the fans running off your receiver pulling to much amps?
@sarversrc 2 ай бұрын
I haven’t, the upgraded receiver can take extra voltage, the upgrades esc is built to supply it.
@VerticalRc187 3 ай бұрын
Hey im doing pretty much the same build about 85% all GPM parts. What receiver box did you use?
@sarversrc 3 ай бұрын
It’s an arrma receiver box. GPMs website lists the part number needed.
@t.alexsmith 3 ай бұрын
Where did you get the QS8 to TRX splitter? Looking to run this same setup on my XRT.
@sarversrc 3 ай бұрын
They have them on eBay.
@kevinlhighfill 3 ай бұрын
Is the gray wire positive or negative on the servo?
@sarversrc 3 ай бұрын
Not sure. I just tried looking and can’t tell. I would take the cover off but with how mine is set up, it’s not a quick process to get to the receiver.
@jimpaulbarcena4259 3 ай бұрын
Just happen to me right now i just put in the 3rd channel and it works
@sarversrc 7 күн бұрын
So frustrating after all the work lol.
@Ryder626 3 ай бұрын
Ok sorry man can't stand to watch this video because of the music. Not sure why it would be so loud.
@sarversrc 3 ай бұрын
Editing error. One day maybe I’ll film a whole new video.
@Acompony 3 ай бұрын
Nice video
@sarversrc 3 ай бұрын
Thank you, appreciate the support
@macmccartney5760 4 ай бұрын
Were you get that green tube
@sarversrc 3 ай бұрын
This one in particular was from wirecare.com I believe. But Amazon and eBay all have wire sheath available
@macmccartney5760 4 ай бұрын
Have you had any problems with your chassis ? I just ordered one and hoping i didnt make a mistake , everyone seems to be ususing vitavon or m2c
@sarversrc 3 ай бұрын
I’ve had no problems. Thick and good quality from my experience so far.
@macmccartney5760 3 ай бұрын
Mines great . I wish I would have got the reverse motor mount with the piece that guards the spur gear from tearing up the Battery, I have the GPM battery mount\servo mount like you do so there's nothing stopping the batterys from contacting the spur gear, I may put the stock battery tray back in until I get the reverse motor mount
@NotoriousBasherAz 4 ай бұрын
Hows the Perfect Pass servo holdin up and how many hours of run time on it so far?
@sarversrc 3 ай бұрын
Haven’t pulled them out in awhile unfortunately, but had an hr to 2hrs runtime on it and it’s been great. Once the servo saver was dialed, servo is amazing, even better when I upped the voltage.
@Facts-R-Real 4 ай бұрын
Hey hey man. Finally got it set up. I’m having an issue getting the input drive (Cush drive) cover to stay down. Have u had that issue yet at all?
@sarversrc 3 ай бұрын
I used the PNW rc madness upgrade kit. Gives you bolts and nuts to go all the way through so the plastic threads don’t pull out.
@phatboi1988ful 4 ай бұрын
Who’s stupid idea was it to have this annoying music in back ground 🤦🏽♂️!
@sarversrc 4 ай бұрын
Forgot to turn the audio level down 🤦♂️ and once the vid is baked, I couldn’t go back in and edit it. You live and you learn
@phatboi1988ful 4 ай бұрын
@@sarversrc Wots better over all out of the rc cars
@sarversrc 2 ай бұрын
Hard to say man, I’ve always loved the Revo, but breaks a lot. The Maxx is an absolute tank. XRT is probably the best mix of everything.
@starfox597 4 ай бұрын
Can someone please tell me the advantage of a belt drive
@sarversrc 4 ай бұрын
No more shredded gears, specially if you start shredding the expensive aftermarket ones. Belts are dang near indestructible. If you do manage to break or wear one out, they are only like $15.
@Facts-R-Real 4 ай бұрын
Did u also buy the ESC and receiver mount from PNWRCMADNESS?
@Facts-R-Real 4 ай бұрын
Is that 8mm Bow House spur shaft 8mm all the way through or does it step down to stock size in order to use the stock gearing? Or a better way to ask is, R U able to use the stock input gear with the 8mm bow house shaft?
@sarversrc 4 ай бұрын
I’m pretty positive the stock is 5mm and won’t fit. I bought the 8mm specifically for the belt drive on PNWs suggestion.
@Facts-R-Real 4 ай бұрын
Was the motor getting pretty hot with that setup before u added the fans?
@sarversrc 4 ай бұрын
TBH I never ran it without them. Think when I temp gunned it, it was getting to like 180. The pulley combo might be a little hot for my liking.
@carloshnunez 5 ай бұрын
Very nice 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@sarversrc 4 ай бұрын
Thank you
@Facts-R-Real 5 ай бұрын
Dude. U literally black marked your driveway and road a wheelie on a wheelie. lol.
@sarversrc 4 ай бұрын
Think has more power than needed and I’ve yet to run it on 12s.
@Facts-R-Real 5 ай бұрын
I’ve bought two of these hobby wing max five G2’s and I’ve noticed, depending on how long they’ve been sitting on the shelf the little bit of dust buildup or lack of grease. I guess something like that after it warms up, or you going for a couple sessions, it seems that that noise will go away.
@sarversrc 4 ай бұрын
For as bad as it sounded I thought a bearing was shot, but it went away.
@Facts-R-Real 5 ай бұрын
Hey hey man. How can someone reach out to you via PM or other?
@sarversrc 5 ай бұрын
Shoot me an email at [email protected]
@rant-n-rave7816 5 ай бұрын
This video would’ve been great without that damn music 😖
@trocktp 4 ай бұрын
@@sarversrcit may have been loud but it definitely was a good instrumental… it had my free styling the whole time..lol
@sarversrc 2 ай бұрын
It’s a fine line. Long driving scenes I feel like people would get bored since the cars are electric and not producing much sound, but forget to adjust audio track volume and musics a little to loud, everyone’s in uproar lol
@mattreadle4566 5 ай бұрын
Btw I did weigh them. Stock sledgehammers 357 grams 6s deboot backflips 382 grams 25 grams about the same as my sharpie
@sarversrc 5 ай бұрын
Minimal difference
@mattreadle4566 5 ай бұрын
How are those backflips holding up? I just got some but still waiting on the spacers lol can’t hardly wait! Thanks for the video!
@Facts-R-Real 5 ай бұрын
U still running the belt drive? If so how u liking it? Worth doing or no?
@sarversrc 5 ай бұрын
No issues at all. Nice not having to worry about it pretty much.
@Facts-R-Real 5 ай бұрын
@@sarversrc is there a way I can reach out to u? I have some specific questions in regards to the setup.
@sarversrc 5 ай бұрын
Shoot me an email at [email protected]
@0thers1d3 5 ай бұрын
It's a "race truck" do you really want it doing wheelies?
@sarversrc 5 ай бұрын
Just better traction instead of spin in loose dirt. I personally haven’t ran into any 1/5th racing. More of just an all around fun truck for me.
@CTKProductions.. 5 ай бұрын
I love the Traxxas Maxx V2, I have one of my own and it’s an awesome truck, but although when I get older, I want to look into getting an Xmaxx
@sarversrc 5 ай бұрын
The Maxx is an absolute tank! Xmaxx is a ton of fun as well
@groundup9371 5 ай бұрын
Are you using a Traxxas receiver
@sarversrc 5 ай бұрын
No I upgraded to a radio link. Wanted the ability to up the voltage to the servo if I wanted to, and to start consolidating transmitters lol.
6 ай бұрын
Why Not putting any information about the parts, links, servo model, nothing!... thnx!
@sarversrc 6 ай бұрын
The servo is a perfect pass monster, got it on Amazon, most the GPM and treal parts are from PNW Rcmadness.
@mikeguzmansr 6 ай бұрын
Parts lists and links?
@sarversrc 6 ай бұрын
Perfect pass monster servo off Amazon, GPM and treal parts are from PNW Rcmadness.
@edwintorres2124 6 ай бұрын
What size is the Flexible Braided cable sleeves? Dressing up 8mm wire.
@sarversrc 6 ай бұрын
I used 5/16 on the esc wires and 1/4 on everything else