You forgot to mention drag link MUST be parallel with the track bar no matter what you install
@frederickemitchell9 ай бұрын
👍Great explanation 👍
@gldsmith61 Жыл бұрын
The top bar is going to smash your shock when the right side flexes up.
@gldsmith61 Жыл бұрын
Sorry but the round side is made for the bushing to sit in and the flat is for the bolt. And the shock always goes on the top so you wont feel vibration for the tire through the steering wheel. You might want to take this vid down and start over so others do not install this wrong.
@tiagoalmeida2714 Жыл бұрын
Qual a melhor máquina para programar codificar BMW a 908s pro a 909 ou a ultra
@lavazakoffee7373 Жыл бұрын
TS601 is not reading IDs from the car by OBD II if you have broken sensor. On BMW G30 2019
@averywellsand888 Жыл бұрын
My ts401 will not trigger any sensors
@skillz1855 Жыл бұрын
I swear you gotta have the worst how to videos.. I've been a huge Autel fan but your support is the absolute worst on the market. It needs to be from the initial set up to wire and pin insertion on every button you push on the tool and why
@earlscheib7754 Жыл бұрын
I like autel scanners but ateq has autel beat on tpms
@MrPromerican Жыл бұрын
Thank u
@mrchad97z49 Жыл бұрын
4:50 Honda? My Acura s a honda product, honda parts, and when I installed my TPMS, it was automatic. I did not program anything in the ECM. If you change a wheel sensor, it should go through its own cycle and re-establish communications by itself.
@ccmusicandsounds45052 жыл бұрын
Good video question I have a 1999 wrangler sahara, on the drag link(original in your video) it has a slight curve or bend then connects to the pitman. I have the same setup, my question is if a straight link also fit? most stores only offer a straight setup.
@Humorem152 жыл бұрын
is the passenger side sway bar link bracket bent towards the tire?
@mrweisu2 жыл бұрын
What is the difference between TS501 and TS508? Thanks!
@FlashPerformance2 жыл бұрын
OBD2 connection. The TS501 does not have the ability to connect via OBD2 to write sensor ID's the TS508 does: Correction: The TS501 does have OBD connection. The TS508 is the newer version
@mrweisu2 жыл бұрын
@@FlashPerformance thanks a lot! 508 is much better then.
@valval89042 жыл бұрын
@@FlashPerformance False info friend, u either dont know or just pretend to know, both have obd connection, difference is quick mode & advance mode function/option, very welcome.
@FlashPerformance2 жыл бұрын
@@valval8904 Yep, you are right, I miss spoke and corrected it in my post.
@k20chad2 жыл бұрын
Is this a common ground scope where only one channel needs to be grounded or is it a floating ground scope where all the channels in use need to be grounded?
@FlashPerformance2 жыл бұрын
Each channel is grounded independently on this scope
@vicky-nc3to2 жыл бұрын
How good is this scope for measuring communication line... Can/ flexray ?
@FlashPerformance2 жыл бұрын
This scope has evolved a lot since this recording. The MP408 can do CAN and serial decoding, also FlexRay and spectrum analyzer
@cpcarservicesrl63432 жыл бұрын
Top +++++
@brucemorris12203 жыл бұрын
I keep getting error message " Network busy (#13). Please try again later." My wifi is connected, and the email address is in the top left corner of the screen. Any ideas would be appreciated 🙏.
@FlashPerformance3 жыл бұрын
Autel is having a lot of server issues. That is usually the case on this type of error. I usually try again in a few hrs and it works.
@brucemorris12203 жыл бұрын
@@FlashPerformance Thanks for the reply, but unfortunately I've been dealing with this issue for 3 weeks. It started when I recieved 3 updates. I'm currently up to 22 updates with no way to download them. One of the updates I received was for Puegot , I found a forum the said when getting this error message to delete all the files for Puegot and try again. Needless to say that didn't work.
@RK-fp7ob3 жыл бұрын
So basically there are 4 frequenties where tpms operate with over the world, how many frequenties is autel working with ? because to my knowledge snap on is or was the only one using all 4 frequenties.....
@RK-fp7ob3 жыл бұрын
@@StilettoSniper 433, 434, 315 en 313.84 MHz... atleast that what they told me.
@jamesbegor57703 жыл бұрын
deal with this company you will be sorry try to return a tpms tool shipped from US you have to contact credit card company you used to get them to respond then they will accept return but you have to send it to China
@bned-hv3of3 жыл бұрын
Ok so I installed this product and went for an alignment but then mechanic at the alignment shop said that the flat side should be down. He also said that he could not align the upper bar due to that. Is there something I’m missing here?
@moethedeaf27463 жыл бұрын
When you have a scan tool in the market, you upgrade it rather than downgrade it. Autel just did that with the MaxiCheck Pro by removing the TPMS capability. Why?
@garrettosteen21293 жыл бұрын
Can you still run a 15” wheel with this setup?
@FlashPerformance13 жыл бұрын
I wouldn't see why not. This set up is not any bigger then the factory set up. I would still recommend calling Rusty's to ask. They will know much better then I will.
@debbiebartlle66353 жыл бұрын
You have the most information, I have 2017 Chrysler Pacifica with TPMS problem.. Where would I take it and what's the cost..thanks
@tfaubus3 жыл бұрын
excellent video, i went with the 501 and consider it a valuable tool to have in my diy collection, it'll pay for itself pretty quick
@Hubjeep3 жыл бұрын
I installed Schrader valves in my winter wheels. 2012 Toyota Prius-V. Will this be able to discover them? OEM sensors in the summer wheels.
@FlashPerformance3 жыл бұрын
Depends on the Schrader sensors you got. The EZ sensors are blank and must be programed with their specific tool. If the sensors have already been programmed, then yes, the Autel tools will pick them up and do the relearn no problem
@Hubjeep3 жыл бұрын
@@FlashPerformance Thanks! I called up Schrader, mine are programmed. Ended up getting the Autel TS508. Autel said it can talk to the vehicle computer as well. Will give it a try in the next week or so.
@jonathanmcdonald70603 жыл бұрын
My MaxiSys Pro does not have a system update icon nor any way I can find to update the Android system. Any advice?
@hontro78463 жыл бұрын
Yang milih Allah SWT like.
@toddellis51973 жыл бұрын
Will this work with no lift? Thanks...
@seri7803 жыл бұрын
Can this be used for 2010 toyota rav4?
@FlashPerformance13 жыл бұрын
This Toyota is an OBD2 relearn. It would require a TS501, TS601, TS508, TS608 to do this relearn. Yes, the Autel tools can relearn this vehicle
@FlashPerformance13 жыл бұрын
Couple things you can try: First, Reboot the tool. Second: Close out all the windows and go to the android screen, drag the MaxiSys App to the top, it will say APP Info> Force Stop. Third: Make sure you have enough memory. You may need to delete some of the large apps like BMW, Benz and VW and insert an SD card to expand your storage. If those don't work I recommend calling Autel Support and maybe they can help
@AKJeeper3 жыл бұрын
I have a Maxisys MS906TS and it currently needs the OS Update installed (3.47.00). It connects to the server just fine, downloads the OS files, but hangs up on Installing. It stays at 0% indefinitely. Any ideas?
@thelastofus69883 жыл бұрын
Would this work on a 97 tj sport .
@elvynortiz34564 жыл бұрын
Thank u for this video very helpful sir
@mattdesruisseau824 жыл бұрын
I would not recommend this setup. Hits my trackbar bolt. Adjusting the steering stop restricts the right hand turn radius so much I had to just let it hit. Should come with offset tie rod ends.
@dacoelec4 жыл бұрын
I wouldn't take one of these bogus POS to a dog fight. I've tried everything and they simply don't work on my 2004 Suburban. I'm sending back my Autel 408 and the POS Autel MX tps's and I'll never spend another effing nickel on Autel.
@tbruceroberts4 жыл бұрын
The TS401 allows you to clone OEM to Autel TPMS sensors so you don't need to mess withe the PCM using the 501 or 601. Just another option since I own the 401.
@chevota4004 жыл бұрын
Can it adjust the psi point that triggers an alarm? I run lower pressure than the factory thinks is safe so the alarm is always bugging me.
@FlashPerformance4 жыл бұрын
The TS501, TS508, TS601, and TS608 can all change the Placard Pressure Value. kzfaq.info/get/bejne/eZ-nhNmrq53Oqn0.html
@mikyahl87494 жыл бұрын
You need to cover Autel 539 539b it's like pulling teeth registering the dam thing
@FlashPerformance4 жыл бұрын
kzfaq.info/get/bejne/mLaDa8mLrZ2plJs.html, this should be the process
@CarlKahler4 жыл бұрын
Will any of these relearn Shrader branded TPMS Valves that go in a Nissan Frontier? And register also
@FlashPerformance14 жыл бұрын
The Schrader EZ sensors are blank, and the Autel tool can not program them. However once they are programmed the Autel can learn them. If you have an Autel tool I would recommend the Autel MX sensors, most of the parts stores and tire distributors now sell them. They are also at a great price point.
@jackd.22504 жыл бұрын
@@FlashPerformance1 I have Schrader sensors on four tires on a '11 Ram 1500. Can I install new Autel sensors and Schrader sensors on my truck? One sensor just went dead. Or, can I install and program a new Schrader sensor with the Autel TS501 tool? I have the equipment to break the bead on a tire to remove and replace the sensors. My Ram 1500 supposedly auto-learns the sensors, but in the past, that has not gone well.
@NathanClevenger13374 жыл бұрын
Why is my unit not adding a email? Something so simple seems impossible on this over priced machine. My iPhone can do it without crying. Its lying saying the login info is incorrect.
@FlashPerformance14 жыл бұрын
Here is how to add Gmail to the MaxiSys tablet. 1drv.ms/b/s!Am24qqoNEz4gr9w0m6o8BYNQw3ETvA?e=pb9v4m
@benl47074 жыл бұрын
How long does the autel sensor last and which is the best autel sensor to get...also this machine only programs autel tpms only
@royabbott23564 жыл бұрын
what does a scope actually do?
@user-kd5lj1gn5w4 жыл бұрын
Will the TS401 work on other than AUTEL brand sensers?
@FlashPerformance14 жыл бұрын
kzfaq.info/get/bejne/rN19q6upnb3Tias.html this video talks about the sensors and what the tool will work with
@jorgenoneya53824 жыл бұрын
So what happens with the adjustable part on the drag link? The adjuster part to straighten your steering wheel? How do you adjust your steering wheel after the swap?
@FlashPerformance14 жыл бұрын
1st you disconnect the rod that connects to the steering wheel. Set the toe 1st with the drag link bar. Once the toe is set re connect the steering linkage, adjust just level your wheel
@JohnnyBravo6334 жыл бұрын
Hi is that working on lexus ? NX200t 2017
@FlashPerformance14 жыл бұрын
Yes, you would want to choose a TS501 or better. TS501, TS601, TS508, TS608. You will need to be able to connect via OBD to the vehicle. Any of these units would work perfect for you.
@SeanCrimmins4424 жыл бұрын
Chad, I've been trying to adjust the touch screen on my Autel MaxiScope to increase the visual on the waveform like you were able to at the 1:11 mark. So far I've been unsuccessful. They only thing I was able to accomplish was to move the waveform as a whole vertically up and down the scale, but not actually able to fine tune the voltage to allow a larger waveform visual. Is there something I'm missing? Thanks
@FlashPerformance14 жыл бұрын
Yes, I have trouble with this sometimes also. Make sure you are selecting the waveform on the left first. You will notice when you touch the area where the Mv are labeled it will change color that means you have selected that waveform to manipulate. Then you should be able to spread the waveform to make it larger.
@SeanCrimmins4424 жыл бұрын
@@FlashPerformance1 Great thanks, the interface is a little cumbersome but works
@connorowens94084 жыл бұрын
Did your kit come with the bolt and sleeve that connects the steering stabilizer to the bracket on the drag link? I just ordered a steering stabilizer and it didn’t come with the sleeve and the bolt to fit with the bracket so idk where to get it other than getting lucky at a hardware store
@FlashPerformance14 жыл бұрын
No, that was on the Jeep already I just repurposed it.
@enkneegivendaze12464 жыл бұрын
Hey ..what is the Moog part # for the pitman arm tie rod end?
@FlashPerformance14 жыл бұрын
REPLACEMENT TIE ROD END PART NUMBERS: OEM part # J8136600 - - MOOG part # ES140R OEM part # J8136674 - - MOOG part # ES62L Note: ZJ Grand Cherokee's may use OEM part # 52000599 - - MOOG part # ES2223R at the pitman arm instead of the # ES140R Complete Replacement Parts Package Part # RS-SC250-PARTS (Fits: TJ,YJ,XJ Models) Part # RS-SC250-ZJ-PARTS (Fits: ZJ Models) www.rustysoffroad.com/jeep-steering-components-conversions-upgrades/rustys-jeep-steering-systems/rustys-jeep-xj-tj-yj-zj-tie-rod-steering-system.html
@enkneegivendaze12464 жыл бұрын
Thanks what about the drag link ends?
@FlashPerformance14 жыл бұрын
@@enkneegivendaze1246 Everything should be in that link I attached. I took that directly from their website