Can three adults sit OK in the front bench with the g56?
@jaysgarage884 Жыл бұрын
That exhaust brake whistle never gets old! Wish my 2nd gen came with that
@slimray11002 жыл бұрын
Wicked !!!
@kierankeelan21942 жыл бұрын
Did you keep the big radius on? What were dyno numbers? Also is that the HC 124?
@ajs963502 жыл бұрын
Love them, I got one of the last new trucks available with the G56.
@tylerkiezek28172 жыл бұрын
Love it
@chrisl.73452 жыл бұрын
You need a V&H FP3 Fuelpak Bro,…flash your own Maps and feel the difference - best investment I ever did on my 103” FXDWG !
@rsafree11392 жыл бұрын
It has a dynojet power vision with target tune add on, probably the most advanced Harley tuning system on the market
@pedroleme78692 жыл бұрын
Hbh
@westinlandis99703 жыл бұрын
Love the manual dude
@ryanholder41023 жыл бұрын
I like the dodge ram
@jessesalt32943 жыл бұрын
stick shift 😍
@texabear8473 жыл бұрын
Sweeettt
@dhbplusect70523 жыл бұрын
sweet truck
@rsafree11393 жыл бұрын
Thanks!
@frankfurino75903 жыл бұрын
which 12v tune do you have?
@rsafree11393 жыл бұрын
It’s from Higher Power Performance
@charleslapin1693 жыл бұрын
Whats a 12v tune, what does it do exactly
@rsafree11393 жыл бұрын
@@charleslapin169 makes the injection a single event, makes it sound like an older cummins
@duacot66333 жыл бұрын
What motor did you swap? For me the whole purpose of the ct90 is auto clutch and dual tranny.
@sebastianweberChF3 жыл бұрын
Any drama with the g65 ?
@JCL4043 жыл бұрын
That hood truck you got there sir them g56 are tough I wish these would be available with the 5th gen
@moparproud39783 жыл бұрын
There’s no such thing as a 5th gen HD
@JCL4043 жыл бұрын
@@moparproud3978 yea their is
@moparproud39783 жыл бұрын
@@JCL404 NO. THERE. ISN’T. Don’t fucking argue, you’ll lose. We’re STILL on gen 4 for HD
@jahandarshah34533 жыл бұрын
Jññm
@keatonsville4 жыл бұрын
Thatsbwhat I want to do with my wide glide but the wife says the motor I have has to break first haha
@tater09094 жыл бұрын
Do you still have the truck?
@LOWRIDER_B.I.G4 жыл бұрын
🤝
@truetrades70566 жыл бұрын
Did the try the 2-1 without baffles?
@dumpsterfab76536 жыл бұрын
Holy shit, this is st Albans. I live by the daycare
@rsafree11396 жыл бұрын
Julian Skinner Haha yea man. I've seen your name on WV motorsports, I'm Russell Safreed. That's crazy someone local stumbled onto the video lol.
@dumpsterfab76536 жыл бұрын
rsafree1 hah no doubt! Ever have any issues with the truck? I'm looking at buying a 15 in a couple weeks, my f150 was stolen.
@rsafree11396 жыл бұрын
Julian Skinner I'll PM you on Facebook
@2012hdstreetglide6 жыл бұрын
did you ever have it dyno tuned. Thinking about this setup for my 12 street glide but everyone keeps steering me away from the big radius 2into2. if so what kind of numbers or can you post your dyno sheet. Also how do you like the whole setup in general?
@TheLespauladdict7 жыл бұрын
How'd she turn out? And roughly what was the cost on that upgrade? I've been contemplating doing the same thing with my 2010 Wide Glide and so far yours is the only one I've seen that has it done. I imagine you had to modify the crank case?
@rsafree11397 жыл бұрын
TheLespauladdict It's been great so far, put about 2000 miles on it so far, and I'm actually at the race track with it right now for the first time. Not super thrilled with my ET's so far, best of 12.1 at 113 mph. Need to work on my 60 foot tho. Was hoping to be deep in the 11's. But it's great on the street, lots of usable power everywhere, runs cool even with no oil cooler, idles nice. As far as cost, it's hard to say. I think the motor was around $5500 shipped, but the supporting mods are a long list. Expect $8000 to do it right. This was a crate motor so I didn't need to modify the crank case at all
@jameswilliams28227 жыл бұрын
@rsafree1 love the truck and is this in NC
@aaronparker72367 жыл бұрын
Are you running 5" pipe with or without muffler??
@rsafree11397 жыл бұрын
Aaron Parker no muffler
@jody14528 жыл бұрын
How are you liking it so far?
@rsafree11397 жыл бұрын
Jody love it! Still Not the fastest thing in the world but the build gave it some character and the satisfaction of rebuilding the motor myself.
@jody14527 жыл бұрын
rsafree1 Good deal man. be safe!
@davidgrimm59686 жыл бұрын
rsafree1 are your push rods loud I'm having issues with mine I can't get the front to quite down
@MxRider7108 жыл бұрын
Haha I know exactly where that's at. Used to hammer down on that bridge all the time when I had my 06 5.9. Had a 5" straight pipe and 2nd gen manifold. Sounded so good. Sure do miss that truck a lot lol. But that thing sounds sweet
@rsafree11398 жыл бұрын
Haha yea I've been making noise on that bridge for 10 years. Live right beside it so I get to listen to every Harley and tractor trailer when I'm in bed at night haha
@MxRider7108 жыл бұрын
I knew that town looked awful familiar when the video started lol.
@DRIFTFACTOR38 жыл бұрын
Now i have a question i just bought a used 2013 cummins. I want to delete everything on my truck but how do you delete the def or is that even an option
@rsafree11398 жыл бұрын
When you "delete", that's what you are deleting is the def, dpf and scr. Everything from the turbo back and the def equipment is gone and you install a straight pipe in its place. You have to tune the computer with something like efi live. I would recommend calling Jonathan at Higher Power Performance and he can tell you everything you know and send you the device and awesome tunes.
@DRIFTFACTOR38 жыл бұрын
ok cool thanks man
@GraVistat8 жыл бұрын
Is the cab drone bad?
@rsafree11398 жыл бұрын
Between 2100-2200 rpm there is some but at 1800 (cruise at 70 in 6th) it's almost as quiet as stock. If you like to cruise 85 though be prepared to listen to drone
@chrisdsltech8 жыл бұрын
what kind of programmer your using to monitor your temps? and how is the clutch doing with the 60hp tune?
@rsafree11398 жыл бұрын
I have an edge cts 2 monitor I like it a lot. And a buddy and I put a Valair dual disc ceramic in it last November the stock one slipped eventually but only under the race tune.
@chrisdsltech8 жыл бұрын
+rsafree1 Nice. what kind of mpgs are you getting and is your clutch petal softer now that your have a new clutch? I hear Valiar is more easy on the left leg compared to southbend
@rsafree11398 жыл бұрын
+chrisdsltech typical is 17-19 mixed driving hand calculated. 21 interstate. I pulled 23 one time on flat ground 55 mph. All this is unloaded. And it's just a hair stiffer than stock but not too bad.
@chrisdsltech8 жыл бұрын
+rsafree1 Thats good. Cant go wrong with a Hand shaker.
@WV_Outdoors8 жыл бұрын
how many miles did you have on it when you tuned it? I have a 15' and was curious as to when I should tune mine.
@rsafree11398 жыл бұрын
4000 miles. Sooner the better
@WV_Outdoors8 жыл бұрын
+rsafree1 haha I heard that buddy! Ima try and get mine done as soon as I can. I'm at 9k right now. Do u have any issues with clutch slippage?
@WV_Outdoors8 жыл бұрын
+rsafree1 truck sounds Awesome BTW
@rsafree11398 жыл бұрын
+Chris Bowyer thanks! And yes I have since replaced it with a Valair dual disc ceramic clutch
@redpoole93238 жыл бұрын
had my 14 done at 14000 and glad I did. I had to get Clutch also. South Bend 3250. Awsome truck.
@lowestyet8 жыл бұрын
Thank you for posting the video. I don't have to spend a bunch money on the truck now and can just drive around with this playing lol
@Juan4themoney8 жыл бұрын
So does your truck still have the dpf? Or did you just remove the muffler? I had an 07 lmm and put an exhaust on it without a muffler but due to the stupid dpf I didn't get any more sound.
@rsafree11398 жыл бұрын
It's straight pipe from turbo back. The 2013+ cummins don't have mufflers. The only way to make them louder is remove the complete exhaust system
@Juan4themoney8 жыл бұрын
+rsafree1 ughhhhhh, I just picked up a 2016, Cummins and was hoping I might get a little more sound. I haven't even checked under the truck. Also I'm in California so even more suck lol.
@rsafree11398 жыл бұрын
+John Zuniga yea you're probably out of luck lol. I'm in WV so no emission laws
@Juan4themoney8 жыл бұрын
+rsafree1 luckyyyyy
@kawitomtom8 жыл бұрын
does straight piping it void the warranty like on ford?
@rsafree11398 жыл бұрын
Yep it voids the power train warranty.
@jeffreyeye67578 жыл бұрын
I'm wanting to cut the pipes on mine does.it mess.with the computer what did you do
@rsafree11398 жыл бұрын
It takes lots of tuning to get them to run with an aftermarket exhaust. I would suggest googling it or searching cummins forum and doing lots of reading
@jeffreyeye67578 жыл бұрын
+rsafree1 alright thank you sir wish that DEF didn't have to get in the way
@dylanlinke86199 жыл бұрын
where did you get your seat covers?
@rsafree11399 жыл бұрын
eBay. Made by Clazzio. The real leather $450 ones. They make $300 vinyl ones too. I love them. 6 hours for install but worth it
@concealed-tech8 жыл бұрын
are these any better then my Laramie seats or just a protection thing?
@rsafree11398 жыл бұрын
+Andrew “Ace” Clark not quite as nice as Laramie seats in my opinion but you can replace one at a time of you rip them or they wear out. Such as driver seat
@TIGERTRONIK9 жыл бұрын
Awesome video dude. Rare to see these G56 equipped new Ram trucks nowadays.
@rsafree11399 жыл бұрын
Thanks! Yea last of a dying breed. I'll own a manual until they stop making them lol
@clintonfeeney91959 жыл бұрын
Who'd you go with for tuneing? Also what ho tune you running?
@rsafree11398 жыл бұрын
HPP tuning. This was a 60 hp tune
@kozikowskibrandon46369 жыл бұрын
Thanks man! What would you recommend muffler or not?
@rsafree11399 жыл бұрын
I'm real happy with no muffler, at this point I have no plans of adding one. I'd say give it a try without one.
@kozikowskibrandon46369 жыл бұрын
Sound sweet! Is there any drone in the cab? I'm planning on deleting my 2014 but not sure if I want to go with a muffler or not.
@rsafree11399 жыл бұрын
There is drone at certain rpms, around 22-2300 rpms, but at 70 mph and 1800 rpms you can't even tell it's not stock