Hope so. Personally I am not a gamer, therefore, I may be not able to offer you good suggestions about this tv box device used for game playing, to be honest.

Actually device itself is new. So, there exists no firmware update. Actually, it is always not recommended that users update the firmware when it works fine, since update sometiems results in unexpected problem or incompatibility or trouble at use. Indeed so.

It is as what is stated. So, you are right.

Yes, M9 is with Android 14.

​​​​​@@lilyyan5645 Which is better M9 (RK3576, Q1 2024, Android 14) or M12 (S928X, Q1 2023, Android 11) ?

M12 (5W) is 12nm... and M9 (1W) is 8nm lithography

Long press the power button of SK1, we can do screenshot.

For recording, we will have to use ADB (Android Debug Bridge) command.

cpu has 64 instructions. But OS s only 32bit applications (ARMV7) Like all amlogic devices

Hi. It is always a preliminary suggestion that we as users can do the RESET operation, ie, RESET back to factory settings, if it happens that we encounter somewhat puzzling scenario at use. Then, let's inspect whether things go back to normal then, incl. wifi connection, etc.

No. This is eSIM hotspot router, offering network connection with terminals. SMS is not supported.

Hi. Thanks for your questions. Answers are as follows. 1. Support for True lossless Audio pass-through i.e. Dolby TrueHD / DTS-HD Master Audio / DTS-X -- YES. 2. Support for AFR (Auto Frame Rate) switching. -- YES. 3. PLEX/Jellyfin Playback Support from local NAS at 4K UHD HDR & Dolby Vision -- No idea about this. If you are interested, you can get the device and inspect whether this will be supported or not. 4. KZfaq 4K HDR & AV1 Support. -- YES. 5. Sideloading Android Apps -- YES. Regards.

Yes, it is the latest, while previous P140 was already stopped.

When compared with the previous already-gone P140, P165 is designed with the extra USB-A port. After all, some users may still demand USB-A port, while previous P140 was all equiped with USB-C ports without USB-A port.

I have no idea about, since our company don't offer WS-6909 this device to customers. It is suggested that you make contact with your own vendor about it.

What about ws6906

Perhaps your vendor can offer.

This is video of unboxing, rather than test, regarding this Android tv box. The video is recorded to show what items/ accessories are included within. So, please do not be misunderstood.

Yes, but some simple steps will be done, for physical mode. 1) Use original data cable to connect router and pc/ laptop, accessing backend, ie 192.168.0.1, inputting account and password, both being admin. 2) Access Settings -> Reboot -> change the default setting of 'eSIM' to 'physical SIM', then reboot. Wait until its automatic re-startup. These two steps are necessary, since it is always eSIM mode in default when out of factory (actually, eSIM mode is what the device is mainly designed for). If it is in eSIM mode, physical SIM card will be not recognized even it is inserted into. As to the physical SIM card slot, it is designed deep behind the battery on the backcover, a bit like the style of old Nokia phone. There exists the card slot, and also the RESET button, surely together with battery, under the backcover of router. Info is introduced as above. Regards.

@@lilyyan5645 I am having trouble inserting the SIM into the slot behind the battery. It doesn't seem to fit Standard, Micro, or Nano size SIM. Can you show a picture of how the SIM is inserted into that slot after the battery is removed?

To professional users, yes, users can update the OS as Linux, if needed, just like normal PC we use or laptop. Sure, it is always the Windows OS that is pre-installed when out of factory. And Linux or Proxmox are not so guaranteed, when compared with Windows OS that is already pre-installed and sufficiently pre-tested before out of factory. I am frank on this point.

No special reason. Website needs to be frequently updated. If not, then website will be not so up-to-date. Sometimes website maintenance and update is not a convenient job.

@@lilyyan5645 Ok, was looking for detailed specification. Does it support spectrum viewing and CBER measurement?

@@arekx spectrum viewing: Yes. CBER measurement: I am not so sure now. yet, I can verify this point tomorrow.

As far as we know, there exists no frequent firmware update. Sure, as to the meter device, it supports users' edit/ delete/ add the satellite list when in need, as being briefly displayed on this video. Sure, for more details, it will be more suggested that you reach your vendor. Regards.

As we know, our pump product is a small pump, though its power efficiency is considerably robust. Yet, if we as users wanna use it for the horizontal distance of 300 ft and vertical upwards distance of 25 ft, I think that is over the capacity of pump of this size. Surely, I think that there will be output water flow, yet, the flow will be rather weak. I think it is the objective description about the scenario. With regards. SHYSKY TECH CO., LIMITED

@@lilyyan5645 thank you for the reply

@@againstalloddsfarm7060 You are welcome, my friend. With regards. SHYSKY TECH CO., LIMITED

Dear friend. Different versions of WS-6979 meters will perhaps be incompatible, since SATLINK did some hardware update/ change. So, regarding any updated version of firmware for WS-6979 meter, it will be more recommended that you directly reach your vendor. More details will be offered by your vendor, I think. Regards.

@@lilyyan5645 Hi, thanks for replying to me....I've already tried but maybe the retailer no longer exists or has changed its name, I don't know but I can't contact them anymore....if you want I can send you photos of the screens and the model which is identical to what you have on the video but it definitely has different software and hardware because the screen is different from what you show on the video.....I don't even know how to understand what version of hw and fw you have installed on board this machine which I believe is a good compromise except that I can't find any signal of a corresponding satellite set... I would be grateful if you could help me fix it at least to make it work correctly.... thanks in advance for your kindness I'm not at home now but as soon as I get back I'll send you a little video or photo of the screens and the meter.....I'd be happy to stay in touch with you, maybe I don't know if it's possible to exchange contact details via WhatsApp for a direct discussion if you'd like okay...thanks so much again

@@lilyyan5645 kzfaq.infod-941eSFhcE?feature=share, kzfaq.infoCgO3QuVpcSU?feature=share, kzfaq.infoyeaJ71WHEJk?feature=share

@@lilyyan5645 kzfaq.infoyeaJ71WHEJk?si=8gY0TdPem99SZONd

@@lilyyan5645 kzfaq.infoCgO3QuVpcSU?si=edLTe50AWHBvlKdj

To any Android tv box, if we install Chrome, or Firefox, we can browse web, naturally. For example, we can get APK file of browser and install it.

Thanks for your inquiry. Actually, your questions cannot be precisely answered, since there exist various external factors that affect the whole performance, like the height, gain of antenna, and also power of input signal, etc. If we give a rough value, it is okay that signal covers 100 - 200 meters range when it is open field. As a comparison, if there exist 3 walls between within, then I reasonably expect that there will be almost no signal that can be obtained. It is roughly as above. With regards. SHYSKY TECH