Does Brembo have a specific brake kit for the Gen 2 Viper? I need this.
@LambFabАй бұрын
Mine is a gen 1 but I do believe they have a gen 2 kit also. They have different sizes depending on your wheels. I will say their measurements in their diagram for the gen 1 were not accurate so be careful
@jeremyrichey4243Ай бұрын
Man, don't know if you ever did anything more with that. But that thing is awesome. Someday want to build a CJ2A rock crawler.
@LambFabАй бұрын
Thank you. I ended up shutting my shop down and the project got put out to pasture. I do still have my chassis I built. Hopefully I will get back to it or get it to someone to finish it and use it.
@juelsokooАй бұрын
No wires n soft roar... she's too sexy!
@ChrisPBacon1983 ай бұрын
I Love The Unique Wheels of The First Generation Viper
@LambFab3 ай бұрын
Thank you! I had the original design machined in 19inch to fit the gen 5 acr viper tire sizes and the monster brembo brake package.
@ChrisPBacon1983 ай бұрын
@@LambFab You Made The Factory Wheels Bigger
@LambFab3 ай бұрын
They were machined from scratch billet aluminum to look close to original but in larger diameter, wider, with different offset and a wider flat lip.
@ChrisPBacon1983 ай бұрын
@@LambFab Very Cool
@WA_583 ай бұрын
Wheels are great 😍 viper of course too.
@LambFab3 ай бұрын
Thank you!
@bustedcherokee4 ай бұрын
Never seen one of these before, I would love to take one of these on. Super cool
@LambFab4 ай бұрын
They are very weird and cool! Equally hard to find! I looked for 3 or 4 years to find this one!
@technoidtype4 ай бұрын
How far did it go 40k
@LambFab4 ай бұрын
24,000 on the odo and im pretty sure that original miles! It was parked for most of its life. I tried soaking it for like 7 years and won't let go so I'm thinking it was heat seized. I will tear it down and attempt to get it to run in another video! But don't worry....it's not going back into the van.
@BigG42004 ай бұрын
That is awsome 🤘🤘🤘🤘🤘🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦
@00whitehulk4 ай бұрын
Now thats a cool jeep! Good luck 👍🏿
@LambFab4 ай бұрын
Thank You! I'm going to do a video series on the build. I appreciate the comments. Please subscribe if you would like to follow along with how it turns out.
@peted52174 ай бұрын
Appears O.E. engine is the Icabod Crane variation !
@ec69334 ай бұрын
I hope whoever made this is proud. They saw that all it needed was the same wheels modernized and nothing else messed with. Timeless classic improved perfectly I'm shockingly impressed this is up there with every SEMA build ever.
@LambFab4 ай бұрын
Thank you for the kind words! This build has been on my mind since I was a kid and I an gradually making it a reality. The gen 1 is a beautiful design, it just needs the proportions tweaked a bit to bring it together.
@ec69334 ай бұрын
@@LambFab you basically perfected it sir. congratulations.
@LambFab4 ай бұрын
Thank you for the kind words! Much more to come for engine and interior. Same theme, attempt to perfect what dodge did right.
@Camshwa27044 ай бұрын
Spicy NB Miata ;) Nah this thing's sick as hell, jealous we didn't get these in Australia
@C5Z06CarGuy4 ай бұрын
Wow the bigger wheels really look good. Who made those?
@LambFab4 ай бұрын
Thank you! I measured them out and had colorado custom make them for me.
@sashoxxx4 ай бұрын
Siick
@manoman04 ай бұрын
The worst yet the Best Viper ever made.
@manoman04 ай бұрын
Worst in like "most unrefinde brute".
@LambFab4 ай бұрын
Yep it's a crude beast! Definition of viper! So fun
@Crankwalk26884 ай бұрын
OEM wheel in a bigger size looks dope!
@LambFab4 ай бұрын
Thank you!
@Caviclade4 ай бұрын
Ah the old Dodge Widowmaker!
@steveharper53684 ай бұрын
i miss my 1993
@kellygreen94234 ай бұрын
Wow! Amazing 🤩
@Rozzi_Maple_Poppy4 ай бұрын
Nice looking viper!!!
@michaelbrown15816 ай бұрын
your best bet is to put the shims back in place. they were put there for a reason, such as preventing bump steer.
@LambFab6 ай бұрын
I did keep them in their original locations.
@user-ez8vy4vo3s6 ай бұрын
Nice video.
@xcelerator677 ай бұрын
Was just curious how much that Ron Davis radiator cost?
@LambFab7 ай бұрын
Was quite a few years ago. Sorry but I don't remember. I'm sure their prices have doubled by now with inflation etc. just give them a call they are very helpful and can get you a ballpark of current prices.
@jordanmcmillan27927 ай бұрын
My early 1993 (antenna) car also has a steel power steering pulley. I was confused as well. I have no idea if it came from the factory.
@LambFab7 ай бұрын
So I talked with a guy that said that the gen 1 pulley was not a problem but the power steering cap was. The threads are plastic And not very good. He used to make and sell a bungee deal that went around the base of the reservoir threads and then had two loops around the vent on the top to keep the cap in place. He also recommended a hose on the vent to get the potential fluid away from the exhaust manifolds! Thank you for the comment. Looking forward to more on the viper build coming up!
@Mr.CarryHandle7 ай бұрын
The amount of craftsman ship and attention to detail that went into this is absolutely amazing I have a 84 k10 to turn it into something like this would be awesome
@devinmilligan1278 ай бұрын
Or marker lights which ever u prefer
@simonjernigan79578 ай бұрын
So youre the fucker I can blame for these flashbang lights
@Manas-Sharma9 ай бұрын
can i have it
@butter26529 ай бұрын
Even those brakes are sexy
@LambFab9 ай бұрын
Thanks man! Lots of work and long way to go!
@snakeskinner29 ай бұрын
I admit it, I'm a sucker for the original 3 spoke wheels. It's the old school traditional look on a gen1
@geraldmontoya9529 ай бұрын
Could you please tell me who did your gauges and how can they be located
@l6echo5310 ай бұрын
Will this brembo kit give you abs? Did stock not have abs?
@LambFab9 ай бұрын
No it will not.
@marshallteel46211 ай бұрын
What did you do to your knee? I just tore my mcl and I’m thinking of getting these.
@CSltz Жыл бұрын
Looks like a dream. With all of the resources that Jeep division has at there fingertips. Taking what people have done to there old trucks. They surely could have come up with something better than what they brought out. I’m 6’ foot. And I don’t really feel comfortable in the new one’s to tight inside and not much headroom. What they could have had if they would have add a few inches here and there to make the new one look like this. But then you have the government involved with all the belts and bags. Wouldn’t it be nice to sign a waiver that you don’t want all of that.
@LambFab Жыл бұрын
Thank you for the comment. I agree that new cars just don't have what the old ones did. No class, no style and way too much big brother.
@supersaiyanpilaf4085 Жыл бұрын
Rip
@CastusTroy Жыл бұрын
Oh wow my old sportage i sold.
@LambFab Жыл бұрын
@@CastusTroy yep I am Tanner. I'm not sure what I would sell it for. Think about an offer. So much time invested and materials. I need to get a battery for it as the optima finally died from sitting.
@sactown1200 Жыл бұрын
Nice lincoln
@LambFab Жыл бұрын
I have looked into them. I believe they are in Michigan? Mine runs really nice but I probably am going to do a 6.0 conversation with a overdrive transmission
@docklloyd Жыл бұрын
Are you still in business and what number do I call?
@Lv.MAJESTY Жыл бұрын
Let’s get it 💪
@bedlinerveterans2318 Жыл бұрын
Nice!
@LambFab Жыл бұрын
Thanks!
@bedlinerveterans2318 Жыл бұрын
Nice!
@MFE92 Жыл бұрын
I'll be following along with my 69 Continental sedan.
@LambFab Жыл бұрын
Awesome! Thanks for dropping a comment! Please subscribe so you don't miss the next Lincoln video!
@jayk7781 Жыл бұрын
Great job. I just wanted to ask is your rack and pinion leaking or is that leak coming from above?
@Boatfisherz1 Жыл бұрын
Keep up these videos!
@andyhutchinson3243 Жыл бұрын
... boosted Motorsports has a bunch of do-it-yourself generation 1 2 Viper stuff he has a 2000 ACR..
@IanRainey Жыл бұрын
Your viper looks incredible!
@LambFab Жыл бұрын
Thank you! It's getting there. Much more work to come! These cars are really fun to work on!
@Rollin8.0 Жыл бұрын
Those shims are to adjust the bump steer curve, they'll be factory. Crazy about everything else omg!
@IanRainey Жыл бұрын
You’re awesome this is incredible! Thank you for the great video.
@dallascarstore Жыл бұрын
keep up the good work you have been very helpful
@LambFab Жыл бұрын
Glad to hear the videos have helped you! Lots more Viper content coming!