that is on our other video hooking up attachments.

@ 1:53 in the video inside the cab it is a toggle switch on the left hand side.

You should get around 8hrs on a tank they are very good on fuel. But how you run the machine will affect consumption, full throttle vs 3/4 throttle hard clay digging vs sand or dirt ect..

No it just moves material

Thank you very much our goal was just to help people out with the machines.

No problem, Keep an eye out on the chain tension for the drive they do stretch pretty good over the season.

Hope to have one of those videos soon.

4 seperate tie downs. All 4 required. This video is actually NOT a good demonstration of how to hook up the chains. Chains under tension that are touching are an issue.

Price

They are around 5k

It is a 2021

It has been a excellent machine so far.

​@@standardrentals6265 , Hi wat its de preis for you Maschine Dumper . Lg Swiss- man 😊

Deseo sader algo del dunper ya que solo hablo Español me llamo pedro de Bilbao

Sorry we do not

DOT Will pull you over if they see chains touching, as well as loose chain hanging without bungee cords. And can be really picky and get you if the hook from the binder is on the weld side of the link.

@@gregamoreno1thanks

Thanks it is a great little machine

Thanks, Yes a secured load is so important.

Except chaining this way, DOT will pull you over cause it’s cross chained and chains are touching each other.

@@KETO_DIET Why? I drive truck for a living and haul equipment. Chains can’t touch each other when chained down.

@@KETO_DIET You can cross chain, you just have to make sure they don’t touch. As you’re going down the road for miles and miles, the bouncing creates friction. And next thing you know your chains break.

@@joshuastevens5910 My dump trailer has 4' walls. Not going to notice. ;)

Not a problem at all specs for the trailer are Cargo Weight (the amount of weight that can be hauled on the trailer) - 10,370 lbs (4,703 kg) GVW (total trailer weight) - 14,000 lbs (6,350 kg) Axles 2 - 7,000 lbs capacity with torsion suspension (no leaf springs makes smoother ride and less wear parts and ride height is lower) Measurement Between Fenders - 83" (6' 11") Deck Length - 240" (20') Hitch Size - 2-5/16" Plug Type - 7 blade RV Skid Steer weight 6593 lb

@@standardrentals6265 Thanks

they are a great little machine

Thank you very much!

Depends on where your located and price has changed a few times around 30k CAD

Glad you liked it!

Yes it is a little awkward spot to get into we use a socket and ratchet is the best way

@@standardrentals6265 The rental shop that I rented from had replaced the nuts with 17mm. I used a open ended 17mm spanner for the bottom one and just a 17mm socket for the top one.

Glad it was helpful!

It sure is!

We hope it Helps

we will have some videos coming of it working for $1500 you cant go wrong

It will do any size of stump just takes more time the larger it is, as far as how fast really depends on type of tree how long the stump has been there. Also cutting teeth and there condition make all the difference in the world if they are dull your not doing much. All I can say it is a great machine for doing a couple stumps here and there you wouldn't want to be behind it all day, you are doing the sweeping across the stump and pushing it around to get to the stumps it can be a work out.

I'm going to use green teeth on my homemade grinder...its always a good idea to cut the stump as short as possible...a stump grinder is a milling machine..go slow even sweeps..most people don't know how to operate a stump grinder..

Thank you that's what we were going for

Yep