InstaGroupTV

@DtoneStudio 3 ай бұрын

Thnx for making this animated video

@970357ers 3 ай бұрын

Cavity walls are the disputed territories of construction.

@CCCP16 3 ай бұрын

Cavity-walls that are already built-up can NOT have cavity-wall insulation added. There are ongoing legal claims cases against this incorrect "blown (beads, fluff, granules E.T.C.) /injection insulation" SCANDAL shown in this video- It CAN and DOES ruin your property ! "blown/injection insulation" must NOT be done, as it immediately bridges the cavity. Cavity-walls must NOT be bridged with insulation (insulation touching the outer walls inside the cavity) or else moisture will transmit by capillary action from the damp outer walls through the touching bridging insulation into the inner walls, making it damp inside the property ! Injecting foam into the cavity stops the walls breathing causing drastic condensation saturation of the inner walls inside the building. cavity-wall insulation batts(panels) can ONLY be installed from the VERY START of construction of the cavity-walls. If cavity-wall insulation batts are to be installed, there must be a LARGE air space gap in-between the OUTER walls and the face of the cavity-wall insulation batts inside the cavity-walls, this ALSO includes an air space gap in-between the face of the cavity-wall insulation batts and the cavity-wall-tie drip points(which must point downwards in the centre of the cavity). Ask N.V.Q. City & Guilds BRICKWORK teachers for PROOF of this, they are the authority on brickwork construction (S.V.Q. City & Guilds BRICKWORK in Scotland).

@CCCP16 4 ай бұрын

WARNING , cavity-walls that are already built-up can NOT have cavity-wall insulation added. There are ongoing legal claims cases against this incorrect "blown (beads, fluff, granules E.T.C.) /injection insulation" SCANDAL shown in this video- It CAN and DOES ruin your property ! "blown/injection insulation" must NOT be done, as it immediately bridges the cavity. Cavity-walls must NOT be bridged with insulation (insulation touching the outer walls inside the cavity) or else moisture will transmit by capillary action from the damp outer walls through the touching bridging insulation into the inner walls, making it damp inside the property ! Injecting foam into the cavity stops the walls breathing causing drastic condensation saturation of the inner walls inside the building. HOUSES THAT ARE ALREADY BUILT UP CAN NOT HAVE CAVITY WALL INSULATION ADDED; you would have to take the outer walls down to install the cavity wall insulation batts. cavity-wall insulation batts(panels) can ONLY be installed from the VERY START of construction of the cavity-walls. If cavity-wall insulation batts are to be installed, there must be a LARGE air space gap in-between the OUTER walls and the face of the cavity-wall insulation batts inside the cavity-walls, this ALSO includes an air space gap in-between the face of the cavity-wall insulation batts and the cavity-wall-tie drip points(which must point downwards in the centre of the cavity). Ask N.V.Q. City & Guilds BRICKWORK teachers for PROOF of this, they are the authority on brickwork construction (S.V.Q. City & Guilds BRICKWORK in Scotland).

@CCCP16 5 ай бұрын

What is shown in this video is VERY WRONG. Ask N.V.Q. BRICKWORK teachers for PROOF of this !

@CCCP16 5 ай бұрын

You can NOT add cavity-wall insulation to cavity-walls that are ALREADY built. Cavity-walls must NOT be bridged. ("insulation" touching the outer walls) Ask N.V.Q. BRICKWORK teachers for PROOF of this !

@CCCP16 5 ай бұрын

What is shown in this video is WRONG. Ask N.V.Q. BRICKWORK teachers for PROOF of this !

@CCCP16 5 ай бұрын

You can NOT add cavity-wall insulation to cavity-walls that are ALREADY built. Cavity-walls must NOT be abridged. ("insulation" touching the outer walls) Ask N.V.Q. BRICKWORK teachers for PROOF of this !

@philg4116 6 ай бұрын

Can't see how this would flow and fill as well as EPS beads.

@maheshbhatia4859 Жыл бұрын

Pl sant Delhi NCR office address

@jobsonmota Жыл бұрын

projeto muito bem apresentado. parabéns

@TheShmoo123 Жыл бұрын

Can this be laid on an underfloor heated, tiled floor?

@thasultan Жыл бұрын

Looks good but whats about the cost? How much the cost will be?

@CCCP16 4 ай бұрын

WARNING , there are ongoing legal cases against this incorrect "blown /injection insulation" SCANDAL-"recommended" in this video- It CAN an DOES ruin your property ! "blown fluff insulation" must NOT be done. Ask N.V.Q. BRICKWORK teachers for PROOF of this !

@amadea1029 Жыл бұрын

For how long this work properly?

@CCCP16 3 ай бұрын

WARNING , cavity-walls that are already built-up can NOT have cavity-wall insulation added. There are ongoing legal claims cases against this incorrect "blown (beads, fluff, granules E.T.C.) /injection insulation" SCANDAL shown in this video- It CAN and DOES ruin your property ! "blown/injection insulation" must NOT be done, as it immediately bridges the cavity. Cavity-walls must NOT be bridged with insulation (insulation touching the outer walls inside the cavity) or else moisture will transmit by capillary action from the damp outer walls through the touching bridging insulation into the inner walls, making it damp inside the property ! Injecting foam into the cavity stops the walls breathing causing drastic condensation saturation of the inner walls inside the building. HOUSES THAT ARE ALREADY BUILT UP CAN NOT HAVE CAVITY WALL INSULATION ADDED; you would have to take the outer walls down to install the cavity wall insulation batts. cavity-wall insulation batts(panels) can ONLY be installed from the VERY START of construction of the cavity-walls. If cavity-wall insulation batts are to be installed, there must be a LARGE air space gap in-between the OUTER walls and the face of the cavity-wall insulation batts inside the cavity-walls, this ALSO includes an air space gap in-between the face of the cavity-wall insulation batts and the cavity-wall-tie drip points(which must point downwards in the centre of the cavity). Ask N.V.Q. City & Guilds BRICKWORK teachers for PROOF of this, they are the authority on brickwork construction (S.V.Q. City & Guilds BRICKWORK in Scotland).

@connectedonline1060 2 жыл бұрын

Zet in op isolatie met een minimale R-waarde van 5 met een hout skelet binnenmuur of een complete nieuwe buitenmuur. Spouwmuur volspuiten met die rommel in de video veroorzaakt schimmel en vocht en isoleert amper. Bouwbedrijven die een luchspouw volspuiten zijn criminelen!

@arpadvarga3475 2 жыл бұрын

How is possible it's not good? If new build houses they fill up the gap too?

@FITVC1 2 жыл бұрын

Many reasons - new properties have even fill of mineral fibre built with each course. It will also have a suitable dpc which many of the older properties which have had cavity wall on dont have.

@rachelstone1 2 жыл бұрын

Great product!

@drywallisinmyblood 2 жыл бұрын

Definitely a canadian video

@senarathsenarath5742 2 жыл бұрын

ඔය සච්ඤ වෛද්‍යෝ වැඩක්නෑ ඉදලා කරලා තියන හරිය ලන්කාව දැක්කහම පේනවා දැන් දුක ලෙඩ මාකටි කරගෙන ජීවත් වෙන්ඩ පුලුවන් කාලයක් නෙවෙයි දැන්

@mslajor5008 3 жыл бұрын

How can I purchase this product in the US?

@garnhamr 3 жыл бұрын

idiots glued it upside down to the concrete in the house i just moved into, i had to grind it all off. Lots of the headers we're broken and the boards had cupped in a lot of places.

@darrenjames9056 3 жыл бұрын

Hi, can this underlay go over an existing sheet vinyl flooring? (heterogeneous vinyl Leoline) To then lay a LVT floor?

@shaun21784 3 жыл бұрын

Hi Darren, yes InstaLay 25hg can be loose laid over a vinyl floor as long as it is sound. The LVTs are simply installed on the self-adhesive layer. Regards Shaun

@darrenjames9056 3 жыл бұрын

@@shaun21784 Thanks for the speedy reply, much appreciated. So an LVT that is normally glued down just gets bonded with the self-adhesive layer instead?

@sabm-g3679 3 жыл бұрын

Can this be used with peel and stick vinyl flooring?

@homedecore4135 3 жыл бұрын

One of the Best Ideas of Soundproofing is "SoundProof Curtains" That Stops Outside Noise by 80% (25 Db) Tested. Check Here: livesoundproof.com/best-soundproof-curtains/

@romanamerlene8554 3 жыл бұрын

I think you can find good solution on Avasva.

@romanamerlene8554 3 жыл бұрын

With Avasva plans doing something like that was easy.

@myramejia9923 4 жыл бұрын

What is your underlayment? Where did you buy it? Is the underlayment glued to the floor?

@realtech4322 4 жыл бұрын

nice product...

@solargalaxy4747 4 жыл бұрын

Thank you for sharing!keep posting. Looking for the best solar panels in Sydney At lowes price? Grab The Offer Now! Check out the links below. <a href= "www.solargalaxy.com.au">Best solar panels company in sydney</a> <a href= "www.solargalaxy.com.au">solar battery for home</a> <a href= "www.solargalaxy.com.au">solar panels for commercial</a>

@bobsbits8562 4 жыл бұрын

Ignore the friendly old tv presenter. DON'T have this done. Or expect damp problems.

@burneybob 4 жыл бұрын

They’re due to come and do mine... why what’s up

@masonrobo9180 3 жыл бұрын

@@burneybob it’s sound mate only goes wrong when installed wrong

@fuzmaginty5822 3 жыл бұрын

@@masonrobo9180 your wrong.cavity it a cavity for a reason??? so it can breath it shouldn't be filled with this crap

@fuzmaginty5822 3 жыл бұрын

@@burneybob did you have the foam put in ???? you will have lots of damp problems believe me in time you will regret it unless you did your homework on this stuff... shouldn't never ever fill a cavity as it's ment to breath... when new builds have insulation they use boards and also leave a gap so the building can still breath

@fuzmaginty5822 3 жыл бұрын

@@masonrobo9180 uh??? its crap don't do it

@JordonTucker 4 жыл бұрын

I'm trying to research loads because I'm converting my loft into a studio & we already have joists in, under that is plaster board then downstairs, I cant take the joists up so I have to work with what I got, I have planned to spend a lot on acustic insulation then a wood flour then soundproof Matt's then a carpet over the top but it might be a waste of money because the sound will just vibrate though the joists to downstairs, is their any product or way around this, like putting these on top of the joists, I cant build new joisists as I will loose hight

@paulreuter111 4 жыл бұрын

Jordon. Thankyou for your enquiry. This has been forward to the relevant person within our company, who will be in contact soon. Once again , thank you for contacting InstaCoustic.

@drampadreg1386 4 жыл бұрын

Acoustic floating floor for what? A person and a mic could have explained that better than generic music. I know that for a recording studio this is useless, and that's all I'm interested in. Try throwing in a little scientific explanation and you may find sales get a little better.

@creektilghman9187 4 жыл бұрын

I know Avasva has the best online plans ever

@mohammednaeem3335 4 жыл бұрын

thank you sir

@marielynn5234 5 жыл бұрын

Wouldn't it be easier to simply lay sheet vinyl flooring instead?

@LandonRoy-cv9rt 5 жыл бұрын

Ehat a shitty system

@vincent4831 5 жыл бұрын

I am exporting loose lay vinyl flooring. my whastapp +86 18668314831

@AlexanderVassermanDDSPC 5 жыл бұрын

if you are doing a short section in between ceramic tile like a wood inlay over concrete slab, will this system work? and what do you do about expansion gaps if you do not want them to be seen in this case??? I want to have a flush transition from ceramic tile to solid hardwood section in the middle of the floor.

@MrIcooke 5 жыл бұрын

Awful product! Much better with the LVT click

@emmajames2315 5 жыл бұрын

Good information. Solar power has become very popular over the years. It has many uses and advantages and many people are making use of it. Solar panel installations for homes and bussiness is getting broad and most homes have started knowing the importance of keeping the environment from carbon-emission, noise pollution, excessive wastage of money on unnecessary fuels and bills. For solar panel system visit website www.futuresolarusa.com/for-business.php

@KB-ki7um 5 жыл бұрын

I can't see this working out well.

@SportsKing1991 5 жыл бұрын

Why? This is how external insulation is done.

@KB-ki7um 5 жыл бұрын

SportsKing1991 , I believe this is the traditional method of external cladding. For real instruction on external insulation check out Celotex’s guidance. It’s free :)

@vladislavveselinov7307 5 жыл бұрын

I had not seen much stupidity. do not spend your money on that.

@anzarmohamed5794 5 жыл бұрын

Does Badminton court is also made with the same concept?

@homedecore4135 3 жыл бұрын

One of the Best Ideas of Soundproofing is "SoundProof Curtains" That Stops Outside Noise by 80% (25 Db) Tested. Check Here: livesoundproof.com/best-soundproof-curtains/