Hi @@youngnick1800 yes it’s basically the same but on an older model like yours. I think you won’t have room to take the starter out. I think on those models you kinda have to remove the input shaft or lift the motor up a little bit or drop the rack and pinion. I’m not sure brother sorry thanks for watching and like always I really appreciate you.
@youngnick18005 сағат бұрын
@@Marty09933thanks bro yea I had room to remove it I just replaced it only thing different is instead of two bolts I had three thanks
@Marty09933Сағат бұрын
@@youngnick1800 you’re welcome brother. Thanks for the update. I was curious if you were going to be able to get it out awesome job great job brother you did great.
@JordanethixКүн бұрын
Hey what engine oil did you use and type?
@Marty09933Күн бұрын
Hi @@Jordanethix I used 0W 20 Castro oil. I usually don’t put that on the videos cause no matter what oil you use people are still gonna complain and bitch that that’s not good oil and stuff so that’s what the manufacturer calls for on that vehicle. It also say on your oil cap thanks for watching. I really appreciate you, brother.
@isaaclinzy51453 күн бұрын
I don’t usually comment on videos but thank you my guy. Having to do this in an apartment complex and not easy
@Marty099333 күн бұрын
Hi@@isaaclinzy5145 you’re welcome my brother and hats off to you man. I know how it is working at a complex. I’ve had customers call me over and that does suck but you did awesome brother great job and thank you for watching a I really appreciate you.
@kaylamarie83094 күн бұрын
That is brilliant!
@Marty099334 күн бұрын
Hi @@kaylamarie8309 thank you very much and thank you for watching I reallyappreciate you
@kaylamarie83094 күн бұрын
@Marty09933 you're welcome, Sir. Great video!
@eltrillo38896 күн бұрын
Will the car require an alligment, after bringing down the rack and pinion?
@Marty099336 күн бұрын
Hi @@eltrillo3889 no you won’t have to align it. You’ll be OK thanks for watching. I really really appreciate you.
@eltrillo38896 күн бұрын
@@Marty09933 Such a helpful video, thank you for answering my question.
@Marty099335 күн бұрын
@@eltrillo3889 you’re welcome, brother. I tried to answer as soon as I can, but sometimes I get a lot of questions and I’m busy but again thank you so much for watching. I really do appreciate you.
@turbon54497 күн бұрын
👏🏾👏🏾👏🏾Marty back at it again👍🏾👍🏾 I’m definitely going to use this instead of paying a couple hundred dollars for an authentic one!! Thanks man!!
@Marty099337 күн бұрын
Hi @@turbon5449 you’re welcome and heck yeah it’s a lot cheaper. Glad the video helped. I really appreciate you. Thanks for watching.
@melisaludeman73587 күн бұрын
Thank you! I feel kind of dumb to be outsmarted by the stool, but it was winning for a time ;)
@Marty099337 күн бұрын
Hi @@melisaludeman7358 lol I hear you. I’m glad the video helped you and thank you for watching. I really appreciate you.
@787montez7 күн бұрын
Definitely dont work
@lorrainegarbic76569 күн бұрын
Thank you so much!! I bought this for mu husband to sit on while playing guitar...he passed away in 2017 and I've been trying to figure it out since!!
@Marty099339 күн бұрын
Hi @@lorrainegarbic7656 you’re very welcome. Sorry for your loss. I’m glad the video was helpful and thank you so much for watching. I appreciate you.
@harlanpinder131812 күн бұрын
Man I thought about this method of how to remove these but seeing demonstrate it makes me feel so much better about getting my own out. Thank you so very much sir. 👍👍👍👍👍👍👍👍👍👍👍👍👍. Have a wonderful day, keep up the good work.
@Marty0993312 күн бұрын
Hi @@harlanpinder1318 you’re very welcome. I’m glad the video was helpful to you and thank you very much for watching. I really appreciate you.
@victorebolum158313 күн бұрын
Excellent pictorial. Camera focused on point of discussion. Thank you sir.
@Marty0993312 күн бұрын
Hi @@victorebolum1583 you’re very welcome brother. So glad you like the video and thank you for watching. I appreciate you.
@marlon968313 күн бұрын
Now you need to spray it because that squeaking gets to me
@Marty0993313 күн бұрын
Hi@@marlon9683 yeah it needed the springs that popped that trunk open but I don’t have that car anymore. I’m done with BMWs but thanks for watching. I really appreciate you.
@paviglianti14 күн бұрын
Appreciate the video, your details saved me a bunch of time with the little things specific to the vehicle.
@Marty0993313 күн бұрын
Hi @@paviglianti thank you brother. I’m glad the video helped you and thank you very much for watching. I appreciate you.
@BobbyGold-bu2jd14 күн бұрын
Thanks bro I was going crazy on a sunday
@BobbyGold-bu2jd14 күн бұрын
GOD BLESS YOU
@Marty0993313 күн бұрын
Hi @@BobbyGold-bu2jd lol I hear you brother drove me nuts too. Thank you for watching. I appreciate you. Glad the video helped.
@richmarchand990314 күн бұрын
A lot of trucks have a single opening on the backside to pass the stud through. I guess Toyota didn't do this on the tundra?
@Marty0993313 күн бұрын
Hi@@richmarchand9903 yes some vehicles do have a little opening in the back. They have a gap a little cut out where you can do that but unfortunately, this one didn’t but I just had to work it in found an area where I had some room was able to get it in there, thank you for watching. I really appreciate you.
@7RaySun14 күн бұрын
This is very appreciated, friend! Thank you so much. 😊
@Marty0993314 күн бұрын
Hi @@7RaySun you’re very welcome. So glad the video was helpful and thank you for watching. I really appreciate you.
@NaluLiftee15 күн бұрын
Really appreciate this video. Helped me out a lot, just changed out the starter in my girlfriends car. Thank you
@Marty099339 күн бұрын
Hi @@NaluLiftee you’re very welcome and thank you for watching. I really appreciate you. Glad the video helped you out.
@NaluLiftee15 күн бұрын
Really appreciate this video. Helped me out a lot, just changed out the starter in my girlfriends car. Thank you
@Marty0993315 күн бұрын
Hi @@NaluLiftee you’re welcome. Glad the video helped out and thank you for watching. I really appreciate you.
@salami9916 күн бұрын
good video, i want to weld sway bar mount for my bmw z3. The m has the mounting points on the strut for a better 1;1 motion ratio that better for driving but my struts don't have the mounts, I wish i could just weld them on and be done with it
@Marty0993316 күн бұрын
Hi @@salami99 yeah if you had the mounds on the struts you could well on those but yeah without those I don’t see how you could do that. Sorry, brother and thank you for watching. I really appreciate you.
@icebergslim865817 күн бұрын
Hey thanks for the video! How do you know that it's the crank shaft sensor?.. are there certain error codes and what are the noticeable issues
@Marty0993316 күн бұрын
Hi @@icebergslim8658 you’ll have to scan it. That’s what I did and it popped up the code. PO335 plus my car was popping into neutral. Thanks for watching. I really appreciate you.
@icebergslim865816 күн бұрын
@@Marty09933 👍👍
@davidbrasche17 күн бұрын
Your a good teacher! Nice showing Orientation of the flange and clips thank-you
@Marty0993316 күн бұрын
Hi @@davidbrasche Thank you, brother. I’m glad the video was helpful. Thank you again and thank you for watching. I really appreciate you.
@TroyX2717 күн бұрын
To late now 😂
@CC-jx1tz18 күн бұрын
What size of t55
@Marty0993318 күн бұрын
Hi @@CC-jx1tz it’s a T 55 star bit here’s a link and thank you for watching. I really appreciate you……..www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwjzxrGu666HAxVFS38AHTE8BmIYABBEGgJvYQ&gclid=EAIaIQobChMI88axruuuhwMVRUt_AB0xPAZiEAQYAiABEgJB3_D_BwE&sph=&ohost=www.google.com&cid=CAASJuRoZYyQZmHS8A0TNE5C_fOg0SqKeB-xokj-OTIPSzP014bVtVlE&sig=AOD64_1wZEeRdfhrMx_8UojtRDXgeeQo6w&ctype=46&q=&ved=2ahUKEwjDkq2u666HAxULGtAFHZYyChMQzzkoAHoECAYQEA&adurl=
@TheShakir9820 күн бұрын
new trans oil pan is 400$ and its dealer only. I will definitely give this a try, looks promising
@Marty0993320 күн бұрын
Hi @@TheShakir98 yes give it a try hope it works for you and thank you for watching i appreciate you
@TheShakir9817 күн бұрын
@@Marty09933 thanks a bunch brother, gave this a try today and so far everything's dry. Cheers
@Marty0993317 күн бұрын
@@TheShakir98 awesome great job brother. This will definitely help others. Plus, I guess this answer my question too. It will work.
@williecolon225321 күн бұрын
What if it locks the doors, but it doesn't unlock the truck?
@Marty0993320 күн бұрын
Hi@@williecolon2253 sorry brother I wish I knew the only thing I can think may be short in the wiring that’s not giving power to the unlock sorry man I wish I had the answer for you. Thank you for watching. I really appreciate you.
@gifity95121 күн бұрын
🎉 hice el trabajo gracias a tu video 🎉
@Marty0993320 күн бұрын
Hola @@gifity951 De nada y gracias por verlo, te lo agradezco mucho
@GrandTheftAutumn10022 күн бұрын
video saved my ass trying to replace my Nissan’s belts. Thank you so so so so so much ❤
@Marty0993322 күн бұрын
Hi @@GrandTheftAutumn100 you’re very welcome brother and thank you so much for watching. I really appreciate you.
@edmorse352923 күн бұрын
Thank you an excellent video!!!
@Marty0993323 күн бұрын
Hi @@edmorse3529 thank you brother and thank you for watching. I really appreciate you.
@bobbyeddins113223 күн бұрын
Any idea how long those factory studs are?
@Marty0993323 күн бұрын
Hi @@bobbyeddins1132 sorry I don’t but I bought it at auto zone and it worked perfect thank you for watching I really appreciate you
@jimmywhitley126324 күн бұрын
NIce Work !!!!
@Dalhax25 күн бұрын
Hi. I have a question. Is there a way to adjust the tensioner pulley as to how tight you want to have your belt tension to be? I'm not a mechanic so I don't have hands-on experience with different makes and models, but with the Mustang, it seems like your belt is only as tight as the spring inside the tension pulley makes it.
@Marty0993324 күн бұрын
Hi @@Dalhax no that’s it It’s set to be tight enough to work the components hope that helps you and thank you so much for watching. I really appreciate you.
@likits199927 күн бұрын
Hey buddy, great job replacing those parts. I started the same thing you're doing on the 4th of July and I have 1 more control arm to finish. The only difference is that I'm working with genuine Toyota parts with the exception of the bushings. I'm installing polyurethane bushings because that's a big job and I dont want to do it ever again. My hat off to you!!! So, as I was removing the belows from the power steering rack, fluid came out. Once I removed the inner and outer tie rods, I moved the steering wheel from one side to the other to remove the last bolt holding the last control arm I gotta work on and noticed more fluid leaking from the rack. Do I need to buy another steering rack at this point? I don't want to install all those expensive parts just to have to remove them again.
@Marty0993327 күн бұрын
@@likits1999 Hello my brother yes you shouldn’t be leaking from your rack. It can be rebuilt if you know someone that does it or you’ll have to buy a new one but yes, your seals are bad on it. It shouldn’t be leaking. You’re doing an awesome job and thank you very much for watching. I appreciate you.
@dees133328 күн бұрын
God Bless you for making this video, sir! I appreciate people like you who make these kind of videos, it's extremely helpful!
@Marty0993328 күн бұрын
@@dees1333 Hello thank you for the blessing. I’m glad that the video was helpful and thank you very much for watching. I really appreciate you.
@Theoneandonlyadamsmithshow29 күн бұрын
Thank you for your clear precise and informative video
@Marty0993329 күн бұрын
@@Theoneandonlyadamsmithshow Hello you’re welcome brother. Glad the video helped you and thank you so much for watching. I really appreciate you.
@bruteforcenfe29 күн бұрын
Hey brother thanks a ton, that’s super helpful.
@Marty0993329 күн бұрын
@@bruteforcenfe Hi so glad you found the video helpful and thank you for watching. I really appreciate you.
@TibuxkАй бұрын
Name of this part
@Marty09933Ай бұрын
@@Tibuxk Hi thank you for watching. I really appreciate you….www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwi2oOqExo6HAxViNK0GHYOTDCAYABAeGgJwdg&gclid=EAIaIQobChMItqDqhMaOhwMVYjStBh2DkwwgEAQYAiABEgJFVfD_BwE&sph=&ohost=www.google.com&cid=CAASJeRoJDvgKrrKMCsvdIMLnaFp6t9Uqqi2CEQN2vwORXQ0fV3ezYw&sig=AOD64_0Pq6siPse6T4jAq-O5BK8Qr-sR9g&ctype=5&q=&ved=2ahUKEwi4uuGExo6HAxV8JUQIHUpaB_IQwg8oAHoECAUQEA&adurl=
@Marty09933Ай бұрын
@@Tibuxk thank you for watching. I really appreciate you…..www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwi2oOqExo6HAxViNK0GHYOTDCAYABAeGgJwdg&gclid=EAIaIQobChMItqDqhMaOhwMVYjStBh2DkwwgEAQYAiABEgJFVfD_BwE&sph=&ohost=www.google.com&cid=CAASJeRoJDvgKrrKMCsvdIMLnaFp6t9Uqqi2CEQN2vwORXQ0fV3ezYw&sig=AOD64_0Pq6siPse6T4jAq-O5BK8Qr-sR9g&ctype=5&q=&ved=2ahUKEwi4uuGExo6HAxV8JUQIHUpaB_IQwg8oAHoECAUQEA&adurl=
@taymitchell101Ай бұрын
We’re the tension how do you take it off and put it on the video helped a little Mr. the most important part but thanks for doing it
@Marty09933Ай бұрын
@@taymitchell101 Hi it’s easier if you go through the bottom of the car, I’m sending you a diagram that marks the location of them thank you for watching. I really appreciate you. Good luck……….. Image 1 - GENERATOR PULLEY 2 - ACCESSORY DRIVE BELT 3 - POWER STEERING PUMP PULLEY 4 - CRANKSHAFT PULLEY 5 - IDLER PULLEY 6 - TENSIONER 7 - A/C COMPRESSOR PULLEY 8 - WATER PUMP PULLEY
@@Marty09933 I end finding them thanks and I did it all form the top I just moved the wiper fluid
@corcelesАй бұрын
My belt came off, because the brand new belt tensioner I bought snaped off at the bolt, so now I got a bolt in the engine. Do you have any Idea what could cause the tensioner to snap off?
@Marty09933Ай бұрын
@@corceles Hi overtightening the bolt or the bolt old and worn out thank you for watching. I really appreciate you. Hope you get it fixed brother
@germangrondona7477Ай бұрын
Hi sir! thank you so much! i have 2 questions... how many oil in liters you put in? and did you do and oil change on a gearbox same car (7dct300)? sorry for my english! thanks in advance
@Marty09933Ай бұрын
@@germangrondona7477 Hi I put 5.678 liters and no I haven’t done oil change on a gearbox. Don’t know if those have a gearbox with oil. Thank you for watching. I really appreciate you. Your English is not that bad brother 👍
@pierretaki4977Ай бұрын
Thanks a lot for this video.
@Marty09933Ай бұрын
Hi pierretaki4977 you’re welcome and thank you for watching. I really appreciate you.
@kimmie870Ай бұрын
Thank you for making this video! It was very helpful. I’ve been trying to close this stool for the last two days. 35 seconds into your video and I can close the stool with ease. I forgot about the little locking button. You’d think it would have instructions on the underside of the seat considering that lock is not that obvious. 😋
@Marty09933Ай бұрын
Hi kimmie870 you’re welcome. Yes, it took me a few hours to figure it out. I had a KZfaq it lol thank you for watching. I really appreciate you.
@richcaponerovgang7163Ай бұрын
What’s the last one you unclipped called with the water spilling out the nipple part
@richcaponerovgang7163Ай бұрын
With the hose clamps
@Marty09933Ай бұрын
Hi richcaponerovgang7163 thanks for watching. I really really appreciate you…….,www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwjen_nf2ImHAxVyF60GHZgbBkoYABAZGgJwdg&ae=2&gclid=EAIaIQobChMI3p_539iJhwMVchetBh2YGwZKEAQYAiABEgJF2fD_BwE&ohost=www.google.com&cid=CAASJORogUByTicSXBduGBF4nTmgLzQhwXWOBEp6rDSU3YVaTosokA&sig=AOD64_0M7YYGy6LqrLM_wMKvQU0p7JrP3w&ctype=5&q=&ved=2ahUKEwjZwPDf2ImHAxX4H0QIHUaiDsYQwg8oAHoECAYQEA&adurl=
@richcaponerovgang716315 күн бұрын
Did you have a o ring on the radiator hose at 13:15
@Marty0993315 күн бұрын
@@richcaponerovgang7163 yes there is one in there
@akshayrasam500Ай бұрын
Heyy buddy i am getting P1201 P1603 and P0650
@Marty09933Ай бұрын
Hi akshyrasam500 hey buddy, those are kind of rare codes are not familiar with those codes. You’ll have to take it to a shop and have them scan it with a good scanner sorry, brother.
@hughbunyea4703Ай бұрын
What does that have to do with the head of the boat being stripped
@wwvetteАй бұрын
The Bolt Head Is Rounded Off, What Caused This To Happend Was The Diaper Sniffer Over Tighten The Bolt! I Have To REPLACE THE CALIPER! SO I WANT IT OFF!
@philliphansen7060Ай бұрын
dont take them bolts out under the pulley no need
@williamhusseyjr1143Ай бұрын
LMAO @ "iTS NOW OR NEVER" 16:20 THANKS FOR THE DETAILED VIDEO.....
@Marty09933Ай бұрын
Hi Williamhusseyjr1143 you’re welcome brother and thank you for watching. I really appreciate you.
@FlexMusCELLZ316Ай бұрын
Any particular brand starter you recommend?
@Marty09933Ай бұрын
Hi FlexMusCellz316 no I think this one was bought at auto zone thank you for watching a really appreciate you
@jo-annringwald-ratchford3987Ай бұрын
I needed this video too so thanks I finally got mine closed!! 😂
@Marty09933Ай бұрын
Hi Jo-annringwald-ratchford3987 you’re welcome and thank you very much for watching. I really appreciate you.