After you did your radio work?

I need technician

How much for the part?

This happens to the G35 too.Would you know if the M35 Yaw sensor fit the G35 ,as in capability wise!

Very useful video, thank you

I saw the same in my 2017 nissan Sentra today and i came over ur video, i guess i will have to go to nissan but the car still start 😢

We all drop stuff as mechanics. I was in the Air Force and the U-2 pilot had a bad altimeter. He was strapped in I reached over him to unscrew 4 screws and I dropped a screw. That scrubbed the mission and we had to pull the ejection seat out and part of the floor board to find the screw. So chit happens

Great job ❤❤❤❤❤ can you give me your link l want learn more

Why the car is so dirty? I had problem of car saying that key is not in range. Problem was in 12 v battery the voltage was low around 9 V. Once I charged it to 12.5V all was OK!!!!!

but any diagnosis tool do that

am so appreciative for your lecture. thank you so much

GREAT MAN... THANKS BRO... 😎😎😎

just did this and luckily I had already ordered a new PCV Hose for this car months earlier. Lucky I did because the valve in the bottom part.( near the turbo) eas completely gone. When you take that hose off if you can blow air from that bottom part then the valve is missing. On the new one when you look in that bottom part of that hose connector, you can clearly see the orange valve. You can actually suck through but you shouldn’t be able to blow through it. I simply took the new PCV hose. I got and cut the ends of it off to use instead of the old one. Not expensive at all on eBay or wherever anyways, I think this is something important people should know. If you did it without replacing the bottom part of that hose then you are probably missing that valve also. Should be easily remedied and replaced.

Niice video. Thx to you I had no problems. Made sure that jb weld was on too… thx

I have a issue with a 02 nissan sentra se r spec v it sometimes loses throttle response while driving i quickly shut it off and then start it back up and works fine wat can that be

Penso que no meu caso não seja essa a solução, pois o meu comando só deixou de funcionar após a substituição da bateria. E o segundo comando funciona perfeitamente, no entanto o comando principal nem sequer abre as portas. Isto só aconteceu após a substituição da bateria.

Tenho o mesmo problema, mas o meu comando só deu erro após a substituição da bateria do comando. Após a substituição da pilha, o comando nem sequer fecha e abre as portas. No entanto dentro do carro, após várias tentativas ele acaba por trabalhar, mas dá sempre o mesmo erro.

is work in opel meriva b 1.4 turbo 120hp year 2012 engine code b14nel ? ? ?

good video. thanks for sharing.

Were did you buy the original iprog.

Hi thanks for the video I have the same problem but after a few times it will start Is any way I can connect with you thanks I’m in manitoba to thank you

ITS 2021

Thank you. I am facing the same problem now. Do you mean that you took the connector out? Just wonder how did you connected the two ends of each wire. By the way, I ever measured the resistance between green wire and yellow/green wire. The reading was 57 ohms. It indicates some continuity between the two lines. Is it normal or not? Your response will be appreciated.

THANK U SUR IHAVE SAME FAULT ON QASHQAI J12 BUT I DONT HAVE WIRIN DIAGRAME FOR STARTER RELEAY CAN U PLEASE GIVE IT TO ME ILL BE THANKFUL

💐 "Promosm"

Smh sooooo if we don't have program we out of luck. What a waste of time

Thank you for your video

De donde saco la válvula pcv que instalo cual le puso

Hey thanks for the video i got a 2022 VW Polo automatic but when i start not crank or start but is showing key not detected hold key next to intended surface. vehicle wallet where is that???

I can see it but i cant touch it , how do you get it out?

You’re supposed to let the JB Weld cure for at least 15 hours ( a little more if the temperature is cooler ) before reconnecting the fitting on top of the hole. 24 hours to be fully cured. When you put 5he replacement valve cover on I hope you put RTV in the “ cracks” on the passenger side of surface the valve cover sits on or you will have an oil leak ( KZfaq replacing a valve cover on a Cruze ( Encore, Trax, Sonic ). The 2019 Encore has a different attachment point on the turbo end. There’s actually an outlet 90 degree bends and it attaches to the turbo intake tube that comes from the air filter box.

You blew it on the check valve. The longer piece of tubing is put on first and the shorter piece of tubing goes at the. Other end as the fitting on that end is slightly pointed down as the check valve needs to be slightly pointed down also.

I hope you can upload a new video about problem ' key system error' Nissan Navara 2021 > how to fix it.

What's the fuse that goes to that control unit? I'm just wondering whether pulling the fuse might do the job to reset it rather than removing the glove box (which I would like to avoid)?

Thanks for this video. Frustrating dealing with this issue. Will try what you have demonstrated.

Thank you from the bottom of my heart, your smart friend from Iraq. My problem is with the Nissan Sentra 👍🙏

He Haw for the win. That is the difference from the DUI repair and a trained and experienced professional. DUI people I love for at least trying. DUI people do not have the resources of the accurate wiring diagrams that follow the schematic. Not a difficult problem to begin with. Thanks, the old school guy.

Good day sir I have the same problem but only problem is that key error shows car starts normal but parking brake light is flashing and car not engaging in to gear, any idea I will highly appreciate your input🙏

Finding problem = 4 hours , fix the problem 2 minutes. Thank you for saving us so much time.

THE IDEAL SEEMS A BIT HIGH ,, BUT I GUESS THAT IS ANOTHER PROBLEM THANKS FOR YOUR TIME !!!

I have a 2010 vw Passat with a key problem message center said key is out of range do you have any suggestions on that

Hello I’m having the same problem on my 09 Yukon hybrid there was 3 dogs who ran under my front bumper now it’s not starting do you think I should take it to a shop to do this procedure I’d have to tow it to do so thanks 🙏🏼

What did you pay for, a 24 hour access, this VIN only, ?????

I really like your channel bro but pls keep your videos to around 20 minutes, lots of wasted talking and running around here, edit out the phone calls and other non related stuff and the long moments with no talking please. You are saying that the owner could have found that problem with a wire diagram but you as a professional made a 36 minute video for a 15 minute job, THUMBS UP

Hi went on a trip today with my 2012 dodge journey and it gave me a no bus, engine stopped 4 times on me. I have a question if you don't mind, does it matter where you plug each connector along those little bars. Are they all the same along the bar

Would that make your car “transmission slip” when you step on the gas ?

Change the battery in the remote it will start right up

I'll say this. I was about to take my car to the junkyard because all the mechanics gave up on it. No one could fix it untill I saw this video. I fixed it myself I didn't bother souldering the bus connector I just got a new one for 80$. GOOD JOB SIR.

I am having trouble with my dodge journey, it shot off as I was driving 2 different times and it wouldn’t start, i left it alone for like 10min, and then it started back up. and I get codes u0002-88, u0100 and u0101, the battery was recently replaced, I’m hoping it is just a loose wire somewhere by the battery. I’m gonna have to do some troubleshooting. Thanks for your video it’s the only one that has given me a place to look 🤘🏼👀👍🏼

Awesome work brother. Im dealing with a no crank on the same car. I appreciate you taking the time to make the video.