kako se restartuje na fabričko podešavanje

why my controller turns off randomly? i set a plan of 8 hours and doesnt turn on, i have to do it manually, then it respects the schedule, then just turn off randomly

Hi, i have a controller and a remote (both miBoxer) Was working fine but I change my alimentation cable recently. Now my receptor dont respond to my controller. I can see both red light blink when I push buttons but nothing happens. I tried to unlink and link again. Led was blinking 10 time then 3 time but still no response. Any idea ? @MiLight-Miboxer

Thank you so much you help me in my job ❤

Can be controlling 2 zones (grouping)?

Can B0 control 2 zones at the same time

I bought the mi boxer mi light 2 in 1 led controller kit with only cct mode.cold and hot light. Can you help. It doesn't connect to the wifi...

Is there a WIFI model which can safely replace the FUT038S ?

How to set cold or Warm white

gentlemen: Mi Light (My boxer) We have problems with the old MI LIGHT CLOUD app, it is no longer in the Play store, why can we no longer use it? I have Devices that I used with this app and with Amazon skill and it no longer works, I have an investment of obsolete money because of you, please ask for solutions, thank you

gentlemen: Mi Light (My boxer) We have problems with the old MI LIGHT CLOUD app, it is no longer in the Play store, why can we no longer use it? I have Devices that I used with this app and with Amazon skill and it no longer works, I have an investment of obsolete money because of you, please ask for solutions, thank you

gentlemen: Mi Light (My boxer) We have problems with the old MI LIGHT CLOUD app, it is no longer in the Play store, why can we no longer use it? I have Devices that I used with this app and with Amazon skill and it no longer works, I have an investment of obsolete money because of you, please ask for solutions, thank you

gentlemen: Mi Light (My boxer) We have problems with the old MI LIGHT CLOUD app, it is no longer in the Play store, why can we no longer use it? I have Devices that I used with this app and with Amazon skill and it no longer works, I have an investment of obsolete money because of you, please ask for solutions, thank you

gentlemen: Mi Light (My boxer) We have problems with the old MI LIGHT CLOUD app, it is no longer in the Play store, why can we no longer use it? I have Devices that I used with this app and with Amazon skill and it no longer works, I have an investment of obsolete money because of you, please ask for solutions, thank you

gentlemen: Mi Light (My boxer) We have problems with the old MI LIGHT CLOUD app, it is no longer in the Play store, why can we no longer use it? I have Devices that I used with this app and with Amazon skill and it no longer works, I have an investment of obsolete money because of you, please ask for solutions, thank you

gentlemen: Mi Light (My boxer) We have problems with the old MI LIGHT CLOUD app, it is no longer in the Play store, why can we no longer use it? I have Devices that I used with this app and with Amazon skill and it no longer works, I have an investment of obsolete money because of you, please ask for solutions, thank you

gentlemen: Mi Light (My boxer) We have problems with the old MI LIGHT CLOUD app, it is no longer in the Play store, why can we no longer use it? I have Devices that I used with this app and with Amazon skill and it no longer works, I have an investment of obsolete money because of you, please ask for solutions, thank you

Am having issues with this device when configuring it through the Dali Extension for Loxone. When using the Lighting controller, RGBW doesn't work, the led strip stays only white and color cannot be controlled.

hola, tengo una duda, quiero poner una tira led monocolor de 15m a 14w por metro. habia pensado en poner en la pared el controlador P1, y la tira led conectado a el tri-c1zr, ademas conectar el WL-Box gateway para que se pueda controlar por wifi (alexa), ¿es posible contectar por RF el controlador p1, el tri-c1zr y el WL-Box para que funcionen en sincronia?

I can’t seem to match up the mode tables across my 5 old devices and one new one. I tried the “mode table switch” mentioned in the video (5 times S- or S+) but that doesn’t seem to do anything. The existing devices have mode names such as “rainbow”, “swan dancing” etc.. but the new one just has “M1”; “M2”, etc. to “M9”. How do I synchronise this? thanks. (All lights are RGBW and all controllers are MiBoxer WL5)

is it possible to control the P3 panel controller with a Wl-Box1? Because in the app with light on and link button it doesn't work

What is the difference between WB5 / WL5 / ZL5 / YL5 controllers?

You don't need router for that? Does control is available with phone only?

Can this be paired with WB05 Controller so that you can have wall mount and wireless control?

Hello, I recently purchased one of your 6 zone remotes which includes 4 scene buttons. Is it possible to remove a zone from a scene? If so, how?

How do you pair them?

Doesn't pair with the remote. I've tried many times just like described here

сколько ступеней увеличения и уменьшения яркости ?

Can i connect led strip light ? And how many feet can i connect with this controller?

I have to toggle "Done:Turn off" every day for my timers. How do I get them to save the setting? <and thank you>

Для чего кнопки s+ и s-?

Hello Please how to pair with alexa ?

How to pair with alexa ?????

Nie działa podświetlanie przycisków

No useful information at all.

I have a problem with this controller, I connected everything, paired it with the remote control, with the application on my phone and everything works very well. However, after several power cycles, off/on, the controller itself goes into pairing mode and the LEDs flash red. I do not turn it on and off consecutively, but even after several days, but the controller goes into pairing mode and flashes red, how to solve this problem? At this point, the device is disqualified by the fact that when you turn it on, the LEDs flash red, it makes no sense.

What if I don't have the button "set" on my controller?

why are you not answering/helping your costumers? (no answers is seen, below!)

Hi there! How can a stop the remote from making noise every time I press a button?

Hello! When I press the color temperature button, the led just turn off. I can't get white color. Thanks

Hello! How can I get white light? When I press the indicator that gets the color from blue to white to yellow, the led band just turn off. Thanks!

how to link box 1 to worl with pir

no support??? Hi, I have the miboxer 5in1 wifi. Now I've noticed that one miboxer lights up green when connected to WiFi and the LEDs have full brightness immediately when switched on and the other miboxer (bought at the same time from a dealer, optically no difference) when connected to WiFi lights up white and the LEDs softly ramp up from 0 to 100% when switching on and slowly softly darken when switched off. Is definitely on the device, could reproduce it with several devices and exchange. Green led on miboxer = 100% brightness immediately, White led = Ramp 0-100& in 1-2seconds. This is not good if you have 2 or more LED strips in a room and one stripe in the living room is immediately bright 100% and the other dims up and down in seconds. Do I have the wrong settings? I connected them with Tuya app and wifi out of the box. set with uni colored white LED strips (the same everywhere in my rooms). do you have any idea what that could be? firmware problem? description doesn't help. Or are there 2 versions of the box?

Контроллер не реагирует на попытку подключиться, думал что попался брак, взял второй, так же не хочет подключатся, безполезный контроллер

I have one will not work remotes

no support??? Hi, I have the MiBoxer Mi-Light WL5 wifi 5in1. Now I've noticed that one miboxer lights up green when connected to WiFi and the LEDs have full brightness immediately when switched on and the other miboxer (bought at the same time from a dealer, optically no difference) when connected to WiFi lights up white and the LEDs softly ramp up from 0 to 100% when switching on and slowly softly darken when switched off. Is definitely on the device, could reproduce it with several devices and exchange. Green led on miboxer = 100% brightness immediately, White led = Ramp 0-100& in 1-2seconds. This is not good if you have 2 or more LED strips in a room and one stripe in the living room is immediately bright 100% and the other dims up and down in seconds. Do I have the wrong settings? I connected them with Tuya app and wifi out of the box. set with uni colored white LED strips (the same everywhere in my rooms). do you have any idea what that could be? firmware problem? description doesn't help. Or are there 2 versions of the box?

no support??? Hi, I have the MiBoxer Mi-Light WL5 wifi 5in1. Now I've noticed that one miboxer lights up green when connected to WiFi and the LEDs have full brightness immediately when switched on and the other miboxer (bought at the same time from a dealer, optically no difference) when connected to WiFi lights up white and the LEDs softly ramp up from 0 to 100% when switching on and slowly softly darken when switched off. Is definitely on the device, could reproduce it with several devices and exchange. Green led on miboxer = 100% brightness immediately, White led = Ramp 0-100& in 1-2seconds. This is not good if you have 2 or more LED strips in a room and one stripe in the living room is immediately bright 100% and the other dims up and down in seconds. Do I have the wrong settings? I connected them with Tuya app and wifi out of the box. set with uni colored white LED strips (the same everywhere in my rooms). do you have any idea what that could be? firmware problem? description doesn't help. Or are there 2 versions of the box?

I would like to attach the miboxer under a stretch ceiling, which means I can't get to it later, for example to press the button. If I have learned the part on the WiFi and later change the WiFi password on the router, do I have to turn to the miboxer and reset the device with the button? or is that changed via the app? would be stupid if I had to press the button, since I won't be able to get to it anymore and you change the wifi password from time to time... (I also have fut089 remote control for 7 Miboxers) thanks for your great help in advance

I would like to attach the miboxer under a stretch ceiling, which means I can't get to it later, for example to press the button. If I have learned the part on the WiFi and later change the WiFi password on the router, do I have to turn to the miboxer and reset the device with the button? or is that changed via the app? would be stupid if I had to press the button, since I won't be able to get to it anymore and you change the wifi password from time to time... (I also have fut089 remote control for 7 Miboxers) thanks for your great help in advance