Happy Badger videos

Пікірлер

@angelalopez7745 2 күн бұрын

Hello, I'm trying to fix my own lawnmower and my question is do I need to take the flywheel apart to clean everything as I've put a new ignition coil on it and I'm still not getting a spark?

@michaelsa892 3 күн бұрын

I just bought one from an auction really good price but it says the motor may have seized up I am going to pick it up tomorrow hope I have not made a mistake

@jetzombie 3 күн бұрын

The motor might not be seized and could be a hydro-locked piston from gas leaking into the cylinder. Pull the plug to make sure it's not that. But, If so you can put in a predator engine, I believe there are some videos on here and also FB groups that have done it.

@meherunnessa7651 7 күн бұрын

Isn't just the paper replaceable

@GabrielEmerald777 7 күн бұрын

Thanks for the info. I just cleaned a push mower and washed the entire flywheel. I haven't started up yet since I need to put it all back together and change a few parts but now I'll know what to do if it starts having start up issues. I do have a question, is it normal for the bottom of the engine where the blade rod connects to the engine to be oily? I already removed all the engine oil prior to cleaning but I noticed that when I tilted the machine over to clean the underside, there's some oil leaking that seems to be coming from the area where the blade rod connects into the engine from the bottom. Any help is greatly appreciated.

@GiftWilson-pk3yn 8 күн бұрын

Please what is the name of the plastic cover for the portable washer. Thanks

@GuysPlayingWithTools 10 күн бұрын

I saw you were 2 short of 1k and I remember waiting for the last one about 2 years ago. I have 2 channels with different stuff and I subscribed them both. Now you can get monetized! 🥳 I hope you are over 4k watch hours, I just don't have time to watch one channel that much LOL

@jetzombie 10 күн бұрын

Thank you very much and have returned the favor. I have well over the 4k required in hours. Again thank you very much, Travis.

@GuysPlayingWithTools 10 күн бұрын

@jetzombie When I saw it, I thought, "It was painful waiting for one more sub when I was there." I don't think I have ever had the chance to do this before. I will bring you up in a couple of the lives I jump into. That should get you a few more. 👍

@jetzombie 10 күн бұрын

@@GuysPlayingWithTools Thank you again.

@jbgeezy100 11 күн бұрын

What size is the screw?

@jetzombie 10 күн бұрын

I believe mx6x1 and length is about 1 inch. Hope this help you.

@1stGood-Girl 15 күн бұрын

Do you have a video about replacing a pulse hose? I’ve got the correct new hose. I haven’t tried yet, thought I’d ask an expert first! 2600 psi Honda power washer…I can go look for more info if you need it. Thanks, Connie

@jetzombie 10 күн бұрын

Connie, I'm sorry I don't. But, I think there are a few on YT.

@kevinogorman6282 17 күн бұрын

Well presented and detailed. Great education for people on inspection and maintenance.

@jetzombie 10 күн бұрын

Thank you, Kevin.

@banksboy6806 19 күн бұрын

So was all that necessary

@jetzombie 10 күн бұрын

Yes, it was because they lack of help from nissan and the dealer.

@banksboy6806 10 күн бұрын

@@jetzombie it’s absolutely is I just had to change my hitch

@nesbit240 21 күн бұрын

I have had 2 Ryboi trimmers in the past 10 years or so. Both have the .12 in them. Absolutely no trouble.

@jetzombie 10 күн бұрын

I know stihls, echo's, and huskies have issues. Ryobi and poulan are hit an miss with them. I have seen mostly issues.

@MarshaMcBride-oj8mz 21 күн бұрын

Thank You!

@jetzombie 10 күн бұрын

You're welcome!

@kennethmorris131 24 күн бұрын

What size sprocket would I need?

@jetzombie 24 күн бұрын

@@kennethmorris131 DeVilbiss Part Number: A00045, it's been discounted with no alt.

@akennedster Ай бұрын

Is there anything in aor around the tracks that need greased?

@jetzombie 10 күн бұрын

No not really, except the idler bearing has lack of grease.

@frankreddy9782 Ай бұрын

Great video. I just picked up one of these for $10. It started and ran after fresh fuel but then the pull string broke.

@jetzombie 10 күн бұрын

I hope you got the string replaced and it's running good. Mine is still running great.

@ansissvars3523 Ай бұрын

Good video, good eplaining. Why could not show proces?

@jetzombie Ай бұрын

The only syringe I had the time had just failed :).

@kevinbledsoe9187 Ай бұрын

I put a e3 in my hyper tough leaf blower and it runs better then it ever has

@jetzombie Ай бұрын

It all depends on the machine that they go in. Like echo, stihl, and shindawia they don't like them.

@kevinbledsoe9187 Ай бұрын

I call bullshit

@jetzombie Ай бұрын

Ya, me too.

@evosahlik Ай бұрын

Thanks for the video, just what I needed. Looking forward to Sept 14, RTR.

@jetzombie Ай бұрын

That's great.

@BrewerCooker Ай бұрын

You could have shut up a little, then actually polished the wheel. Show end results. You should know your audience is predominantly men. Also, what I do do? Really?? And you’re teaching people? Horrible video.

@motorcycle4fun Ай бұрын

Thank you! You’re a life saver!

@jetzombie Ай бұрын

Thank you.

@jeepinintexas6215 Ай бұрын

I didn't have to pound on the pan to remove it. Use those pry bars called a "maidens slipper". I replaced the solenoid with the Dorman unit which I think has already crapped out within a few hundred miles. Looks like I need to do the job again with a Mopar pump.

@jetzombie Ай бұрын

Since they replaced it all and now we have 40000 more miles it's still doing great. I wish you luck and hope it all works out to the best.

@jimt902 Ай бұрын

I watched 3 other videos on this installation and yours is the best. Thanks for putting this up. I bet you can use a piece of a foam insulation strip to keep the wire from coming out of the overhead trim.

@jetzombie Ай бұрын

That's what I did, I forgot to show it :) .

@louisflaherty7616 Ай бұрын

Do you know where you can buy idler parts

@jetzombie Ай бұрын

Not yet.

@louisflaherty7616 Ай бұрын

Are you aware is you can buy the wheel with the bearing anywhere?

@jetzombie Ай бұрын

Check the FB groups, I've had no luck.

@louisflaherty7616 Ай бұрын

@@jetzombie groundhog has them

@jetzombie Ай бұрын

Great, do you have a link?

@MrTyjnash Ай бұрын

Very informative video. I’ll be doing this over the weekend. Appreciate you posting this.

@jetzombie Ай бұрын

I hope it helped you.

@MrTyjnash Ай бұрын

@@jetzombieYes it did. I have a 2023 Titan and you offered a perfect play by play. Again, appreciate it.

@jetzombie Ай бұрын

@@MrTyjnash That is great to hear.

@SavDog262 2 ай бұрын

does it matter if you paint the flywheel or not? if you keep the magnets clean?

@jetzombie Ай бұрын

Not really if the is not rust under the paint and the gap is correct.

@SavDog262 Ай бұрын

Thank you. I have a flywheel that was rusty and I cleaned it and treated it with phosphate/cleaner. I’m just wondering if I should spray a coat of paint to keep it from rusting again

@TheodoreScopeline 2 ай бұрын

Thank you from Jefferson County 👍🏻

@jetzombie Ай бұрын

You are very welcomed.

@muchogracious1557 2 ай бұрын

Any luck on finding bearings or anything for it? Mine are shot.

@jetzombie 2 ай бұрын

I believe there are 6205RS bearings for 2 ea. for each idler.

@muchogracious1557 2 ай бұрын

@@jetzombie Is that an AGT number?

@jetzombie 2 ай бұрын

No, it's a standard bearing number.

@muchogracious1557 2 ай бұрын

@@jetzombie Oh ok! Good deal! I really appreciate that. I've been searching the Internet trying to find anything about a replacement with no luck. Thanks again 👍

@jetzombie 2 ай бұрын

You're welcome.

@tejay9416 2 ай бұрын

I really like that you pointed out the water displacement in wd40. 😂😂👌👌

@jetzombie Ай бұрын

Thank you.

@kittycato2023 2 ай бұрын

Thank you so much. Loved your video. Can you do more videos on fixing these barbie doll machines?

@jetzombie Ай бұрын

I will try!

@kittycato2023 2 ай бұрын

Lmao. I love your sarcasm! set it and forget it!

@jetzombie Ай бұрын

Thank you. :)

@earthn1447 2 ай бұрын

Fantastic -

@jetzombie Ай бұрын

Thank you! Cheers!

@KalebBroadhead 2 ай бұрын

Tractor Supply carries a Karavan tongue-mounted spare tire mount now, it is $99 and it hangs the spare below the A-frame on the tongue.

@jetzombie 2 ай бұрын

That's great, I'll have to check on it.

@chrislester3152 2 ай бұрын

I found that one had a kit of bolts going to turn moter bolts were loose

@jetzombie 2 ай бұрын

I'm glad you checked and found it.

@MorningGloryRanchTexas 2 ай бұрын

I’ve never asked a total stranger for help on KZfaq before. If there’s any chance you’d be willing to chat with me about this model mini excavator I’d really appreciate it. I got one today and am very worried. I’m available on fb under the same name.

@jetzombie 2 ай бұрын

Check your FB message.

@rexdingo9389 2 ай бұрын

That’s a lot of problems for having low miles. I was considering buying one. After seeing this I’m a little concerned.

@jetzombie 2 ай бұрын

Rex, like anything second-hand, will have issues if not taken care of. I made the video to show what to look out for. and not to scare anyone :). In all, I took it all over the trails up in WVA, and not one issue. In one day trip, I did 140 miles, which was a beast. In all, If I were to ever get one again, it would be a 900 or RS1 for the suspension. They are a blast to ride and handle really well.

@randalthomas7906 2 ай бұрын

Loved the video!..short..simple..to the point 😊

@jetzombie 2 ай бұрын

Glad you liked it!

@JuanMartinez-uf1de 3 ай бұрын

Very helpful tip,,,do you clean the whole flywheel with with wire wheel?

@jetzombie 3 ай бұрын

That's great, I brush off anything that may be sticking out. But focus on the coil and magnet area.

@JuanMartinez-uf1de 3 ай бұрын

@jetzombie thank you sir

@HaliburtonBoy1 3 ай бұрын

It is not a dipstick nor a cleaning rod. It is a guide wire to provide stability for the narrow tube. Once you have inserted the tube, you remove the guide wire and connect it to the main hose.

@jetzombie 3 ай бұрын

Thanks for the info

@raddpuppy70 3 ай бұрын

Looks to be the same process as my 2012 Polaris Ranger 500 EFI 4x4 crew. Just the video I needed as the components all look the same or at least similar. Thanks man!

@jetzombie 3 ай бұрын

Glad it helped

@dlbaugh 3 ай бұрын

I was wondering if you had any thoughts about a smooth top vs a diamond plate top.

@jetzombie 3 ай бұрын

I went with antiskid tape and paint, due to liquids make it really slick. The antiskid also gives traction.

@Dstromb232 3 ай бұрын

This E3.12 Spark Plug is not for Echo products, it says it replaces the BPMR7Y, but you need one that replaces the BMPR8Y which is a cooler plug, I think.

@jetzombie 3 ай бұрын

Good tip, thank you.

@MrPunem 3 ай бұрын

What do you think the street value be for one with about 25 hrs

@jetzombie 3 ай бұрын

It all depends if your area has a flooded market. But, if not then depending on what you paid for and what you want for it is what sets the price. Like I paid 6200 for mine and they go for 7000 at my location.

@heavenleigh111 3 ай бұрын

You should send this to Yamaha

@jetzombie 3 ай бұрын

I don't know if they would really care, but never know.

@5772tim 3 ай бұрын

To frustrating, a bullet got down n the bottle m of mine. Bought a brand new one for my pmr, lasted one day and now the springs are jammed and not working.

@jetzombie 3 ай бұрын

I would be careful if you were to be taking it a part to retrieve the round that slipped to the bottom.

@DrSweetshaft 3 ай бұрын

I run a 6” fan 80 watt on the left side of my qh12. It blows a lot of hot air out! I’ve boiled gasoline in the past, leading to “vapor lock” and stalling. This will certainly help. All 4 swing motor bolts were hand tight when I checked them. I will check the chassis/ frame bolts. Thanks for the info.

@jetzombie 3 ай бұрын

Sounds great!

@neintoten6155 3 ай бұрын

This is actually a great, no-nonsense, very informative video! Thank you very much, HB!!

@jetzombie 3 ай бұрын

You're more than welcomed.

@jetzombie 4 ай бұрын

I know I said a new word predotores and not predators, I was thinking of predators in the area. Sorry for the miss speaking :).

@dabody57ify 4 ай бұрын

Hello Mr Badger I can not thank you enough. I have a 214 that I was having fuel issues with. I'd even called around to have one of the local shops fix it for me. But after watching your video I was able to fix it myself. and quite frankly I had given up right before that again thank you. P.S you definitely saved me a lot of money yes SIR ! 😊

@jetzombie 4 ай бұрын

Glad I could help.

Ең жақсы KZfaq

Пікірлер