9 сағат бұрын
14 сағат бұрын
Күн бұрын
14 күн бұрын
21 күн бұрын
Ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
3 ай бұрын
3 ай бұрын
3 ай бұрын
3 ай бұрын
3 ай бұрын
3 ай бұрын
4 ай бұрын
4 ай бұрын
4 ай бұрын
5 ай бұрын
5 ай бұрын
Пікірлер
@zonkas6729 2 күн бұрын
Do you have to drain all the fuel in the tank?
@turnbullgarage88 2 күн бұрын
No, not at all. Just loosen the fuel cap so no pressure builds that can slowly weep fuel out of the line.
@emilpartanen8719 3 күн бұрын
Top tip. Invest in decent tools. The tool you are using will ruin fasteners sooner or later.
@turnbullgarage88 3 күн бұрын
Curious which tool you are talking about.
@emilpartanen8719 2 күн бұрын
@turnbullgarage88 Your ring spanner has incorrect shape. No wonder it doesn't fit properly. Should be illegal to make and sell such tools.
@turnbullgarage88 2 күн бұрын
Ring spanner, must be from UK. I’ve had no issues with my tools and stripping of bolts is not an issue unless they have been severely rusted. 45 years of using tools I consider myself to be somewhat proficient. Thanks for the comments and suggestion.
@tedd1091 3 күн бұрын
What is the mileage on that engine???
@turnbullgarage88 3 күн бұрын
At the time of the rebuild, around 115k kms.
@tedd1091 3 күн бұрын
@@turnbullgarage88 Probably didn't get regular filter and oil changes
@turnbullgarage88 3 күн бұрын
@@tedd1091 probably not.
@PanionCube 3 күн бұрын
you can use a rubber mallet to cut masking tape off the top of the block
@turnbullgarage88 3 күн бұрын
@@PanionCube yes, very true. I did that during my apprenticeship many years ago. I need to get a rubber mallet, it would be way quicker.
@generalcaeser9176 4 күн бұрын
This video was of no help for the 1999 Sambar. We need a lot mor videos spacificaly for the newer body Sambar as there is nothing. I've been battleing this for hours as a mouse has crawled up in my dash and died. It stinks! But I have 1 little thing I can not find for the life of me that's preventing the complete removal and now I've already broke 2 things trying!
@turnbullgarage88 4 күн бұрын
Unfortunate! If I get a newer ride one day maybe I will dig into it. Good luck.
@generalcaeser9176 4 күн бұрын
@@turnbullgarage88 Thanks. It's hot as hell and aggravating to the max. I believe I need to pull the bottom steering column off but there are 4 screws. 2 were easy, the other 2 are recessed 4" deep with a 1/3" hole to get a screw driver in but not be able to see or get a grip. I'm no little guy, that's why I gave up the previous body style and got this bigger cab, so this kind of bending over in the heat out in a stuffy garage and smelling rotten maggot mouse and breaking parts is enough to make a guy go insane! lol
@generalcaeser9176 4 күн бұрын
@@turnbullgarage88 Oh, and mine is for sale =) lol W put it up on ad when my neighbor put up his $26k Daihatsu Jumbo cab 4x4 with 2k km up for just $16k. I wanted it so bad but needless to say it sold in like 2 seconds. =(
@kbussie1 4 күн бұрын
where did you get the inductive pick up at.
@turnbullgarage88 4 күн бұрын
Number one spark plug lead.
@kbussie1 4 күн бұрын
did you buy the inductive pick up kit and where
@turnbullgarage88 4 күн бұрын
I have had that timing light fir 25 years
@soloshark1910 11 күн бұрын
Hey Turnbull! Looks like you both had a great time!!! Great coaching, encouraging, and not overly demanding! Your bride did Fantastic for her first time on road course!!! Love the enthusiasm!!! As we both know, knowing the line and driving the line can sometimes differ! #SeatTime!!! Hahhaa!!! Hope to see you both do it again soon!!! All the best!!
@turnbullgarage88 11 күн бұрын
Thanks! There will be more for sure.
@dcaron9999 11 күн бұрын
Hi Richard. M1Fan here (forum pseudo) with the fuel pump issue. Thanks for sharing your adventures once again. Love the format. You are getting very good at editing nd narrative. Smart move to travel one day ahead of the event. Looks like you and Jenny made the best out of it with the road incident. So awesome that you got Jenny joining you as a passenger first and now, into actual track driving. Beautiful track, elevation changes, banked turn, and landscape to start her off. She is a good sport! Could see that she was gaining confidence already at her second session. Very cool! You had better lines than the V8uù Camaro and it took the stubborn driver a while to point you by...
@turnbullgarage88 11 күн бұрын
Thanks for the comments and watching a long video. Yea she is pretty cool. She has ridden shotgun on track since our blind date 12 years ago. Now she got a taste behind the wheel and loves it. I created a monster I think.
@KyleSpradlin 12 күн бұрын
Couple of those brackets looked like a big pain in the ass my son has the exact same vehicle that needs the timing belt change no water pump leak but will change it also but the coolest thing about this video is working with your son.
@Nick-yq3wt 13 күн бұрын
I enjoyed your video and driving and the track looked really awesome! On the lap timer, do you have to manually reset it after each lap. Thanks!
@turnbullgarage88 13 күн бұрын
Thanks. Yes I manually hit button at the start stripe. I am editing a new video now with a better camera set up. Just got back from another day at Area 27.
@crgjohnson 13 күн бұрын
Good video! Car sounds great.
@turnbullgarage88 13 күн бұрын
Hey thanks Craig.
@padigadiga 16 күн бұрын
I'm a month out from getting my sambar dump and has no ac. Gonna retro a universal hotrod system in it..... definitely will hate life getting the cluster out but more so I'll have to take the brake fluid reservoir out
@turnbullgarage88 16 күн бұрын
@@padigadiga reservoir doesn’t need to come out. It unscrews from the dash and can stay in place.
@soloshark1910 16 күн бұрын
Hey Turnbull! Good stuff! Always better to do the work/prep Prior to the Track Day!!! Many have their day shortened because they defer maintenance/prep!!! Safety equipment is Always authorized, nice helmet Mrs. T!!! Wishing you both a great track day!!!
@silver_bullet92 21 күн бұрын
Do you change the alignment every time you go on track? I currently autocross my Mach1 and the swaps I currently make are tires only. How quickly have you been able to swap the alignment change?
@turnbullgarage88 21 күн бұрын
Yes. Takes 5 minutes per side. Just jack front corner, loosen upper strut mounting bolts, slide strut inwards to the stop and tighten strut bolts. Toe is likely impacted slightly but I’ve had no issues. I plan on putting it on an alignment machine to see what effect it has on the toe.
@silver_bullet92 13 күн бұрын
@@turnbullgarage88 Awesome, thanks for the response. Looking forward to that update.
@motores2007 21 күн бұрын
Great! Tks!!
@Have.An.AmicoDay 22 күн бұрын
Ive heard they always will break at somepoint and to put one in the trunkwell...
@turnbullgarage88 22 күн бұрын
Crazy. It is a cheap car, but come on....
@soloshark1910 22 күн бұрын
Hey Turnbull! A dad's work is never done! Hahahaa. Good job fine sir, quick job and rewarding... helping out a young person!!!
@turnbullgarage88 22 күн бұрын
So true. Easy fix and helped a great kid that is struggling to pay rent.
@ronaldravenscroft3431 22 күн бұрын
Is the other one on the other side cracked to. They are not supposed to to be cracked.
@turnbullgarage88 Күн бұрын
Just one was cracked and was replaced.
@ronaldravenscroft3431 22 күн бұрын
Three balls only
@user-py8cm9ww6r 27 күн бұрын
Do you have to undo the ac lines to remove the transmission
@turnbullgarage88 27 күн бұрын
If you remove the engine like it did, yes. If you drop just the transmission itself, no.
@qoph1988 29 күн бұрын
Dangit, I was really hoping there was a trick for getting around that spring :) ah well
@turnbullgarage88 28 күн бұрын
Me too brotha!
@callemin Ай бұрын
Thanks for the product tip. Picked some of this polish on Amazon and cleaned my tips Saturday and they came out great!
@clauderivet5180 Ай бұрын
Would a magnet along with the grease 1-2, turn at a time be cleaner?
@turnbullgarage88 Ай бұрын
It is aluminum, non magnetic.
@soloshark1910 Ай бұрын
Hey Turnbull! Always good information! Have yourself a great day!
@MickyBellRoberts Ай бұрын
Very educational. I cannot wait for my Subaru Sambar to arrive from Japan, very exciting.
@MickyBellRoberts Ай бұрын
Good morning, I ordered and purchased a Subaru Sambor a week ago from Japan. It arrives in August. I am so glad I found your channel, just subscribed etc. Awesome.
@turnbullgarage88 Ай бұрын
Hey thanks and congrats! Lots of info on my channel for sure. If you are on Facebook, join the group Sambar Squad, there is a ton of helpful stuff and people on there too.
@soloshark1910 Ай бұрын
Love the Dad & Son Garage stuff!!! No better day than today!!! #Happy Father's Day!!!
@AnaeliaGutierrez-kp9jf Ай бұрын
Is possible for me to know where I can buy the screws for close and tie the gasket set of cover block?
@turnbullgarage88 Ай бұрын
Don’t really understand what you are asking?
@franksymes9805 Ай бұрын
So we just get to guess if problem solved.
@turnbullgarage88 Ай бұрын
Stand by for follow up video. So far both issues have not come back.
@soloshark1910 Ай бұрын
Enjoy watching you doing 'Garage' things! All the best!
@motores2007 Ай бұрын
Tks!!
@KarenSanchez-qo5ht Ай бұрын
Good God - you have the patience of a Saint - - - I'm enthralled by your perseverance and am so glad you've additionally included the oopsies and additional sticking points - - this should have a million views . . . you're a good dude . . .
@turnbullgarage88 Ай бұрын
Ha, maybe a crazy dude lol. Thanks for the comments, much appreciated.
@soloshark1910 Ай бұрын
Hey Turnbull Garage! We like see what you got going on regardless! Sorry about the Escapes Trans...Again! All the best, Have a great day! Hahaaa!!!
@turnbullgarage88 Ай бұрын
Owe you a hat! Email me, my contact info in the video description.
@soloshark1910 Ай бұрын
@@turnbullgarage88 Emailed! Let me know you received it... All the best!
@jordanbarone9094 Ай бұрын
I've found if you don't put any lube when checking clearances, the plastigauge wont stick as bad and its easier to wipe off if it does get stuck to the part. As long as you're not spinning the rods or crank without lube (which you shouldn't be if you're just checking clearances), you should be fine with the metal on metal contact. Can't wait to get my Sambar soon!
@turnbullgarage88 Ай бұрын
Good to know. Thanks for the comment. Good luck with your Sambar!
@drivestickshiftNYC Ай бұрын
Thank you man, the lighting and editing is brilliant 👍
@mathermp Ай бұрын
great video. thanks for the info!
@danwood4312 Ай бұрын
God, bless you, man, you should have someone to help you with your job.
@turnbullgarage88 Ай бұрын
Ha, yea I suppose. I do get my wife or kids to help when in comes to bleeding brakes. For most work, I have always worked solo and developed skills to make it work. The old saying, where there is a will there is a way! Thanks for the comment.
@JerryCecco 2 ай бұрын
camber plates? See Vorshlag, ALL design and ALL build in house in Texas
@Nanashi_MYOB 2 ай бұрын
Well, they are called throw-out bearings for a reason.... since they are pretty consumable. If you have an engine away from the trans it's good practice to just start over with a new a bearing there. One Heck of a project. I'm catching this late, but I am enjoying every bit of it. It's like a train wreck. I can't look away. Your perseverance is admirable.
@turnbullgarage88 2 ай бұрын
Got it finally repaired, $2700.
@BigKandRtv 2 ай бұрын
Very useful video series. I think if more people realized this series is on YT, more people would feel confident buying these trucks.
@BigKandRtv 2 ай бұрын
I know the feeling of opening a box of parts and feeling excited. My problem is that sometimes it has been so long since I ordered I can't remember what I was supposed to get.
@motores2007 2 ай бұрын
Nice! Thanks! I thought you were going to to a cold start at the end kkkk
@turnbullgarage88 2 ай бұрын
Yea I suppose I should have!
@TheMotoShaman 2 ай бұрын
What a great looking Sambar! Cant wait for mine to come in so I can start wrenching!!
@Aladdin_666 2 ай бұрын
nice music
@BigKandRtv 2 ай бұрын
Very useful. It looks like the Subaru has gotten more 'aftermarket love' than the Suzuki. And the intake snorkle and high exhaust exit are really cool.
@turnbullgarage88 2 ай бұрын
Yea that is my baby. Suzuki was a project I sold some time ago.
@BigKandRtv 2 ай бұрын
It's surprising how the engine/trans can so easily be installed as a unit. Good stuff!
@turnbullgarage88 2 ай бұрын
True, I’ve done a few and can get it swapped pretty quick.
@gburtshawca 2 ай бұрын
What’s the plan for the the next try?
@turnbullgarage88 2 ай бұрын
Maybe next week, but likely 2 more weeks. I will put a video out advertising when.
@PiyalSanjeewa-ru9to 2 ай бұрын
Dear sir Is it possible to fit the ks4 EN07 engine block to the EN07 EFI engine head
@turnbullgarage88 2 ай бұрын
I cannot say for certain. I would think so but I would contact G&R Imports, they do rebuild on many engines and would have more knowledge. Good luck.
@gburtshawca 2 ай бұрын
If you’re ever in need of carbon brushes, “Carbon brush supply” in Edmonton Canada can make any type of brushes.