Hey up mate you're getting there looks like a lot of hours looking forward to the next video
@TassieKustomsКүн бұрын
Yeah it’s coming along.just work on it when I can.lately it’s just Sanding and detail work so doesn’t really make for good videos.. Cheers for watching.
@yochemin3 күн бұрын
WOW! sweet car
@saulberistain80686 күн бұрын
List of materiales so far
@TassieKustoms5 күн бұрын
It’s just the plug to pull a mold from so far so it’s just 9mm and 3mm mdf,expanding foam,and drywall filler.
@kevinkerlin56037 күн бұрын
Coming along nicely
@konnectoneforexsignals78447 күн бұрын
The roof looks too high and just off. too small too high.. the slope is not Lambo slope. Ahh I see it now.. the roof is too narrow on sides of car.. should be wider. Yeah too tall and narrow.
@TassieKustoms7 күн бұрын
It may look that way but it’s the correct height width and length.may not end up spot on but I’m ok with that as building it for myself.
@kdakool18 күн бұрын
Really enjoying following along!
@TassieKustoms8 күн бұрын
Cheers mate.
@michaelroberts62998 күн бұрын
custom board is cheap and flexable
@TassieKustoms8 күн бұрын
Yeah I’m kinda to far from anything to get the right stuff unfortunately and ordering anything online would take weeks to get to me so just got it done .if I build another style of body I’ll order everything before hand..
@marineforces32148 күн бұрын
car dealers if pro or private & pro car shops are the enemy of owners who own because they love to drive
@lambobuilder9 күн бұрын
My knees hurt just watching. Great job. Shows the real effort to make a car.
@kiwigeeknz9 күн бұрын
Bro u need some knee pads! Enjoying the vids. I want to do a 1:2 scale Aventador.
@TassieKustoms9 күн бұрын
I so do.haha Could either get plans online or make your own using a model .its been a really fun project so far.give it a go.
@Sniveller279 күн бұрын
Looking great! 👍
@TassieKustoms9 күн бұрын
Cheers mate.
@Starshine_999 күн бұрын
Finally a mask, woohoo! Fantastic job, by the way.
@TassieKustoms9 күн бұрын
Cheers mate.
@Sniveller2712 күн бұрын
Looks great! But getting it registered in Oz is another thing. Have you talked to an engineer yet...?
@TassieKustoms12 күн бұрын
Yeah that’s why I’m not doing a icv.just to much work to get that done rego wise,but a re body is alot easier depending on base vehicle.
@obscurazone12 күн бұрын
So brilliant that folk are quite literally coach building Countaches, from scratch, in their garages! It seems so "in the spirit" of Lamborghini doing this, I love it :-) looking forward to the next episode. Oh I'd not have music on the video either, its plenty nice and entertaining just watching you work and listening to you mention what you're doing. Your vid work and editing is great 👍
@TassieKustoms12 күн бұрын
Cheers mate..appreciate the support and feedback.yep I’ve learnt that the music additions dont help.haha..it’s just all off a iPhone as don’t even own a computer..🙂
@DIY-V1213 күн бұрын
Not your first rodeo by the looks of it, looking forward to following your progress.
@TassieKustoms13 күн бұрын
Not to using fibreglass but first time building my own car body.and making KZfaq videos obviously 🙂.
@kiwigeeknz13 күн бұрын
How many cans of foam?
@TassieKustoms13 күн бұрын
11,most of it I cut back off. as I’m not good at estimating how much it will expand.🙂
@quentinstacy3516 күн бұрын
Loving the Chrysler by Chrysler coupe.
@MegaDirtyberty18 күн бұрын
Cardboardini, Foamini, Fiberini?, jk cool project, always wanted one.
@TassieKustoms18 күн бұрын
Haha yeah heard them all lumberghini lampoorghini. I wanted one too so had to build my own as hard to get stuff like this in Australia these days..
@750coda18 күн бұрын
This would make a super cool jet boat 😍
@camcutcnc19 күн бұрын
Nice work, thanks for sharing !
@antoniovargasdafonsecatoni124519 күн бұрын
Eu tinha 7 anos de idade e dirigia um KB 7 do meu pai q puxava madeira em 1956
@alefalzetti2919 күн бұрын
Incredible work my brother! I'm looking forward to this project. I'm trying to learn as much as I can. Because soon I'll have to be doing the same. My best wishes, and the greatest success to you my friend. Greetings from Argentina
@johngibson383719 күн бұрын
Hey up mate thought you were getting a mask, keep up the good work
@ghmluthieria19 күн бұрын
top demais Acompanhando aqui do Brasil!!!
@doug207820 күн бұрын
Nice !!
@MsAston00721 күн бұрын
Great video,fantastic job
@GT1900garage21 күн бұрын
Now this is a new project on my playlist !!!!
@artbyjoel21 күн бұрын
This is awesome!!
@georgiougarage161721 күн бұрын
Do you have a link for the plans?
@TassieKustoms21 күн бұрын
I started with these old ones.take abit of work to get right tho.there are better ones online to buy I think. mofler.com/uploads/attachments/monthly_2015_09/PLANS-Lamborghini-Countach_pdf.7137715a2c47c552447f1904466001b6
@georgiougarage161721 күн бұрын
@@TassieKustoms thanks for that
@af0ulwind11521 күн бұрын
Awesome Boat man!
@JosephDR21 күн бұрын
This is badass!
@loligagger8521 күн бұрын
music NOT necessary for this.
@TassieKustoms21 күн бұрын
I have no idea what I’m doing when it comes to video making..iMovie has limited function.may give the music a miss next one.
@michaelroberts629919 күн бұрын
@@TassieKustoms get a larger trowl ,PS the music on first video was good!
@Kitzkrieg21 күн бұрын
Nice work.... HATE the music, and the fact that the dude whispers when explaining his process, then when the music comes in-it's loud af...
@TassieKustoms21 күн бұрын
Cheers.sadly the videos are just made on an older iPhone using iMovie so have very limited editing control.
@Kitzkrieg21 күн бұрын
@@TassieKustoms fair, but how bout you give us a more chill toon when you're not speaking. It's seriously a cool watch, but for the music.
@NickManCuso5921 күн бұрын
Quite an accomplishment. Something to be very proud of !!!
@lambobuilder21 күн бұрын
Great job. Love the attention to detail. Assuming you are buying foam by the case.
@TassieKustoms21 күн бұрын
One case of 12 has got the body done..most of which ends up on the floor.haha..
@replicabuilder499622 күн бұрын
Nice work. It’s one thing to want a car but it’s another thing to build a car from scratch.
@jimaust535722 күн бұрын
Good decision on the wheel arches. Project is looking terrific, well done. Looking forward to the next video 😁👌
@TassieKustoms22 күн бұрын
Cheers mate..appreciate the support.
@roverwaters387522 күн бұрын
is it high body version of the Countach?
@TassieKustoms22 күн бұрын
Yeah the lp500s was the poster car for me as a kid so that’s the car I’m building.🙂
@balazslehoczki458221 күн бұрын
Can't wait for your videos week after week! So nice to see how it's taking shape! Where did you get the plans for the rear wing? And how are you going to do the wheel arches?
@TassieKustoms21 күн бұрын
@@balazslehoczki4582 cheers mate..the wing I just did myself from looking g a photos.made the 2 ends and a larger center one out of mdf .then just 2x1 timber to hold them to the width I wanted and filled with foam. Wheel arches and front bumper will be made separately.
@MrCarrera2822 күн бұрын
Mate you are working to live the childhood dream and I love seeing your progress!!
@TassieKustoms22 күн бұрын
Cheers mate.
@kelvenguard23 күн бұрын
45 years Auto Body your project is coming along nice :) I've used can spray foam on cars before just to get a few more miles out of a old rust bucket... BUT I did spray the professional House/Construction foam for 10 years on the side mainly in the ALBERTA CANADA Oil Patch... its a WAY NICER foam to work with when shaping and sanding a project and after spraying can be sanded in 15 minutes... It sprays HOT and is mixed at the Gun tip as a 1 to 1... You will need a Full Face Shield Mask with Filters when sanding this foam it Sucks getting it in your eyes because its really light and static and feels like Sand in your eyes so wear a Full Face Shield Mask with Filters and blow your self off really good before you remove your face shield... There should be local Spray foam guys that sprays foams houses in your area...
@TassieKustoms22 күн бұрын
Cheers.yeah the spray foam isn’t great for detailed shaping but it’s good for what I need.most of the final detail is in the filler anyway.the resin will eat some foam so a coat of dryway filler saves that. Lucky I think I’m done with the foam stage now🙂 but a professional spray foam may be good for the next project.
@kelvenguard22 күн бұрын
@@TassieKustoms Cool... I'll keep watching your step by step... I seen another guy on KZfaq basically build a wood and plaster car 1st. then fiberglass it... If you find a company that sprays Foam in houses ask them if you can watch them spray and get a block and see how it carves... I also use the green foam blocks the women stick flowers in for fixing Kenworth Hoods when I'm missing chunks that stuff is super easy to sand and carve and you can fiberglass right over it...
@user-zg5hy4ro2q23 күн бұрын
You know you can buy a "kit" body....where someone else has done all the work. You haven't even started....making bucks, molds, finish fiberglass lay-up AND you still don't have a frame, powertrain, suspension, or wiring. Good luck; you'll probably quit and sell it cheap to some other poor soul, who in the end will have a "replica."
@MaddCrazze17 күн бұрын
Not everyone quits and its not about buying something quick be done. this is the best bit of a project, its a great skill to develop and learn.
@lucsurmon262324 күн бұрын
👍👍👍👍 great job indeed
@colossalbigfoot25624 күн бұрын
Cool a hell.. I’d drive this as my daily.
@colossalbigfoot25624 күн бұрын
Had to sub your channel just for this. Lotta work going on. Looking good..
@colossalbigfoot25624 күн бұрын
I bet you have a nice scale RC airplane somewhere huh? This how RC bucks are sometimes made. Great job!