Hello sir I am Waseem Sohail from Pakistan iam christian man I am fitter indeed job your country give me chance
@ssorum2045Ай бұрын
HOW MUCH DOES THE LABOR COST TO BUILD THE FRAMEWORK, AND THEN SHEET A STRUCTURE LIKE THIS?
@BuildingwithNARFАй бұрын
@@ssorum2045 All according to where and what is involved. Some framework consist of lots more bracing details, bigger machinery, etc. Siding and roofing is the same. There are standing seam roofs with more involved than screw down panels. Walls always has openings. Windows are more labor intensive than doors. Each job is different.
@davekummer6587Ай бұрын
beautiful music choice---and craftsmanship
@bretgreen5314Ай бұрын
Thank you; I need to do something similar.
@ksale22Ай бұрын
Thank you
@chickenfarmer209Ай бұрын
what if your door is too short and doesn't reach the purlin/header? My door is 72" to the top and the metal is at 74". The extra pieces are too tall. It is frustrating me greatly.
@BuildingwithNARFАй бұрын
@@chickenfarmer209 you can use a 2x4 angle screwed on to drop the height. If you have a cee girt u can flip it over to drop the height. If this doesn't work you may need to frame an opening that you can attach the door in.
@darryllawrence25302 ай бұрын
Were Grinders not invented when this was produced? Secondly epic fail unless the curb is getting an adapter because i didnt see any sort of leveling
@paulmaxwell8851Ай бұрын
Many steel roofing panel manufacturers will void the warranties on their products if grinders are used. The heat generated can ruin the protective finish (even if 'only' galvalume') and result in premature corrosion problems. Hands snips and electric nibblers are used.
@darryllawrence2530Ай бұрын
@@paulmaxwell8851 I must've missed the manufacturer rep in the video? Did you know most want a Vapor Barrier as underlayment too? Also there's a touch up paint for scratches/ grinder burns?
@mariorodriguez87292 ай бұрын
Thank you for the video. Where can I buy this door kit? Your amazon link does not bring up this style of door.
What are these type of steel frame structures called Also can you get a prefabricated setup like this to be like a bank barn?
@BuildingwithNARF2 ай бұрын
This is known as a rigid frame steel building. I'm not sure what a bank barn. These type buildings are prefabricated and we bolt them together at the job site. All the welding is done at the shop. We can build you a custom size and design. Let me know what you need and I'll send you a quote. [email protected]
@Icantfindabetterhandle2 ай бұрын
Galvanised steel frames
@daniell75092 ай бұрын
How much do you charge per sq ft?
@NSResponder3 ай бұрын
You mentioned that you'd like it if the laser was also a range fiinder. Laser range finders exist, and they can be as accurate as you want depending on what you're willing to pay for. If Stabila included range finding in this product, would it be worth an extra 1, 2, or 3 hundred bucks? One milimeter accuracy should be doable.
@JoseMendoza-mv1ig3 ай бұрын
Thank you very much for this video, bro. I really appreciate it. I’m gonna be installing my first one in a few weeks doesn’t seem too crazy. I usually work on residential so I’m hoping for the best
@Eric-fq5wx3 ай бұрын
Looks like you made the addition free standing. Is there any reason not to attach to the existing building wall? Im considering an addition to my red iron building but thinking about attaching to the existing beam. Any thoughts?
@BuildingwithNARF3 ай бұрын
The existing build is a wood frame. Lots of trouble to attach so I made the addition free standing.
@weirdopen62813 ай бұрын
Hmm. Guess I'm gonna frame a new door space out of 20 ga. steel because the door does not reach purlin height. Damn.
@BuildingwithNARF3 ай бұрын
Yes, If you use other style doors you will need to frame an opening.
@scottmcbride22374 ай бұрын
Nice work. Ive watched a half dozen of videos on this and everyone does it different. Crazy
@BuildingwithNARF4 ай бұрын
Point is to keep it from leaking... No right way.
@treynorman4 ай бұрын
It would work a lot better if they had overhangs and or gutters on the building!
@BuildingwithNARF4 ай бұрын
He had gutters and did not maintain them. He removed them. He also said if he ever built again he would have a 5 ft roof extension.
@tiredofsacred4 ай бұрын
wonder why they dont make a precut flashing for that purpose, seems like a common enough thing
@russellswanson79074 ай бұрын
Ahhhh..... Yeah. This WILL leak!
@alejandro1314 ай бұрын
Helped me a lot!! Thanks!! Gracias
@robspangler34934 ай бұрын
Any more videos of this building being finished?
@worldtraveler85714 ай бұрын
Hi, can you describe the materialw ised and the cuts? Id like to do similar for a charity project.
@alejandrolopez28115 ай бұрын
Where do I find a good metal manufacturer in Dallas Texas ?
@BuildingwithNARF5 ай бұрын
We can ship to Texas. Email me at [email protected] for your free quote.
@denniswright79405 ай бұрын
there is always somebody out there showing how to do it wrong and the most unsafe way to do it . osha would love you they are for profit organization and the money they would make of you would be very high
@josegonzalez-pg5bb5 ай бұрын
What would be the cost of the labor to do this project?
@WC4DOOR6 ай бұрын
With all the extras (banding, bag and sag, vapor barrier, and inside sheeting) what are you getting per square foot to install the building?
@shanenaidu32646 ай бұрын
Hello, What are the specs and weight capaciy of the telehandler used in the video?
@BuildingwithNARF6 ай бұрын
6000lb and 36' reach
@deweysanders14616 ай бұрын
Out of curiosity what is the sqft cost on these structures?
@deweysanders14616 ай бұрын
Thank you @@BuildingwithNARF
@jogrant38516 ай бұрын
Thanks :) But the background music was hell.
@treeplucker27846 ай бұрын
NARF! Hi, how come you always put the bolts on the edge of the top of the pier? It just bothers me.. i'd think the center would be nicer. 2nd question.. What manufacturer do you use? Although seems like they mis ship/build a lot of things, that you have to fix. I'm in Buffalo NY, so I'm considering one that will be better suited to snow load. Do the manufacturers give you some sort of plate to set those bolts in the concrete? How exactly do you measure them all out? I would think this is one of the most important parts. Thanks for all the metal videos! these are the first i've ever seen and they're inspiring. Most people around here use wood, and they also try to use the amish. It looks like the metal goes together even easier than wood, so I'm interested in seeing if that works better for me. Trying to be cost effective, as I'd like to build many, to create a whole industrial park. Where are you located?! Thanks, Greg
@BuildingwithNARF6 ай бұрын
Thanks for inspiring message. Yes the column would probably be better in the middle of the pier. But when you enclose the building later then the pier would be outside the steel line . This way the concrete is inside your building. The manufacture in most of my videos is proned to a lot of mishaps. Welcome to construction. We contractors deal with this all the time and it's our job to figure it out. This is why I like to provide my own materials when I can. I now manufacture my own buildings to try and beat this problem but I'm also human and short materials or make mistakes in orders or quantities. I'm located in GA. I can have a building shipped with the specs you need Email me at [email protected] and I can get u an estimate. Anchor bolt plans are provided for placement of the bolts.
@treeplucker27846 ай бұрын
@BuildingwithNARF thanks for the reply! Yes I realize the concrete would be outside the metal line but I figured some rain wouldn't hurt it. Or just cover it in dirt... Thinking more now... I guess you wouldn't want to just cover the outside in dirt... would probably be nasty and bring water in to rust the bolts. Curious how you keep the water away. I will email you to shoe you what I need thanks. Greg
@tuckervio31897 ай бұрын
Love your content buddy. Keep up the awesome work from Down under New Zealand.
@rmac07 ай бұрын
Hey man. I know this is an older video but have you done any detail videos on the trim around a partition wall? I’m getting ready to start sheeting mine and I have two partitions that I want the trim to look good around the purlins and girts. @BuildingwithNARF
@rmac07 ай бұрын
@@BuildingwithNARF thanks man!
@MohsenEslami-yq6tg7 ай бұрын
Hello and greetings. I would like to thank you for recording such videos, which help people like me a lot. I have a request from you. My request is that you help me to build the halls I want. My hall has an opening of 30 meters, but without the middle column at a height of 6 meters. I want to know with what size H beam I can build these halls. I will build it. Of course, if the opening is 30 meters, it will answer. If it doesn't answer, I can make the opening of the shed up to 23 meters. I am waiting for your correct answer. I thank you again for your help. I wish you a good day
@sarasingh63637 ай бұрын
Where are you guys ? Planning to build one
@MohsenEslami-yq6tg7 ай бұрын
Hello and greetings. I would like to thank you for recording such videos, which help people like me a lot. I have a request from you. My request is that you help me to build the halls I want. My hall has an opening of 30 meters, but without the middle column at a height of 6 meters. I want to know with what size H beam I can build these halls. I will build it. Of course, if the opening is 30 meters, it will answer. If it doesn't answer, I can make the opening of the shed up to 23 meters. I am waiting for your correct answer. I thank you again for your help. I wish you a good day.
@JUANCHAVEZ-gi1bf7 ай бұрын
The wood screws are for the wood doors.
@anibaldamiao7 ай бұрын
It's an overkill to use an air tractor plane to keep the cement moist while it cures :D
@youtubeisfullofspam70687 ай бұрын
What brand level do you recommend?
@BuildingwithNARF7 ай бұрын
I'm not favorable to a brand. I do like lasers over the old traditional bubbles tho.
@maggiesun9857 ай бұрын
It's cool!
@alejandroExplorer20238 ай бұрын
What are the measurements of the shed?
@BuildingwithNARF8 ай бұрын
100*100
@robertbutler80048 ай бұрын
The title should be how to frig up a metal roof JUST SCREW INTO THE FLAT PART OF THE SHEETING INSTEAD OF THE RIBS.
@chrisalister22978 ай бұрын
@3:41 no harness in a scissor lift? Naughty, naughty.
@michaelgarrow32398 ай бұрын
I’ve seen commercial buildings built on grade. 1-1/2’ drop in 600’. Yes 1-1/2 feet!
@emadnadi52069 ай бұрын
No foundation beam/walls between the piers ????
@BuildingwithNARF9 ай бұрын
Piers only ....
@mikecrawford53319 ай бұрын
I think I will leave the metal intact and forget the skylight
@BuildingwithNARF9 ай бұрын
Great choice.... Skylights usually leak within 5-10 yrs.