If I wear a 10.5 in men's shoes should I get my rollerblades in 11 or 10?

The Miinibrute doesn't come alive until you do some patching with the cables and utilize the sequencer modulation... a lot.

How much the liner became loose over time, I mean if your foot is very loose due to the loss of density of the foam. Do you recommend buying a size smaller than usual?

Are the wheels good for indoors /outdoor. What bearings do you have them paired with. If i would get a different pair of wheels from what you had on yours would be a good pair of wheels you recommend for indoor / outdoor.

Fun times. Keep movin n groovin!

Lovely work on this piece !

Sounds great

I’m most definitely sure that I dig this kinda groove!

Just bought it same size Love them first use no pain! Just scritch sound from the brand new liner :)

I caught some of your rollerblade content but I’m glad this popped up in my feed, jamminggg

Do You think buying XT is worth it?? I recently bought it and saw your video after that.

Thanks for that, it made it clear for me that my oxelo mf500 boot is way cheaper, robust and performing than XT on my endless 90. I have taken out XT from my buy list and will focus in CJ2 prime

The zetrablade is a great skate for beginners or people like me I’m in my 50’s and I skate for exercise not doing anything crazy I still consider myself a beginner I don’t even skate backwards.

just a tip: either record voice separately at home for no noise or u can record voice as u make the video but get better mic for noise

how is this not viral ?

What type of wheels do you have? I like that short fat wheel

I see you went to town with them doing crazy tricks, ledges maybe even? Mines look almost as new after a year. I only do slalom / wizard / figure / hockey drills with rockered frames. Do you live near the ocean also? Mines aren't rusted at all.

Real review, thanks mate

Just bought these! Love em but the bottom of my heels go numb after 30-45 minutes. Hopefully that gets better.

Hi, which Rollerblade among these 2 would you recommend? Crossfire or Twister XT...thanks

Hi, which Rollerblade among these 2 would you recommend? Crossfire or Twister XT...thanks

Just ordered them ,have today or tomorrow, I got the 8-8.5 & not sure if I shoulda got ur size,what CM is ur foot ?

🤮 Exuse me! 🤣

1 year later, do you have additional thoughts? Have you tried the blanks with a big wheel setup? I’m curious how power transfer feels with the Blanks vs Twister (effectively, UFS vs 165).

Good info mate, thx. I changed frame and wheels on this skate - comparing the original frame with endless frame I must say the RB frame is way too soft. So the product is overpriced imho it should include a high standard frame. without limiting us to 80mm only. The overall "footfeel" (Is that a word?) is great.

My foot is 270mm in length and widest part is 11cm. I usually have shoe size 43-44, but here I chose 42, which is really tight in the beginning, but you will have much more control over your skates. The Liner will stretch after 20km. I tried 43, but my heel felt a bit loose, so I sized down. I really can't complain after already 100km

Try some wizard skating, a subtle rockered setup. You can choose from a 165 mount or just the UFS frames as it was intended to be. The original wizard frames are just too expensive for someone who might not light it. There are some good ones like NN/Endless/rockin. I tried the 5x80 wheel frame setup and they are great.

Hello Can I have a BIG help from yall that have the Twister XT! I'm from Brazil and I have the opportunity to buy it in the US in 2 weeks from now. I'm going to buy it on Amazon and have it delivered to the address that my brother is going, but I'm very worried about the SIZE. My feet measure about 27cm both, so the Rollerblade Size Chart suggest me to pick up the 10/10.5 The problem is that my feet are really WIDE like a pair of flippers hahahhahahah. One is 11cm wide and the other is more like 11.3 cm wide So I'm worried about buying the suggested size and feel bad beucase of the width... I think I am going for the 11/11.5. What do you guys think?

Extremely sore in the inside ankles due to the way they sewed the tissues tho

Cmon man you swear to god you dont feel it sore asf in the inside ankles ?

Maybe a tripod or selfie stick? You gave us 13+ minutes of crotch shot. 😂

Ugdgurdirgit

Those little metal rings are frame bosses. Just saw a solution to loose bearings from a speed skater yesterday. Lay a strip, two, or three of cello tape thru your wheel until the bearings fit snuggly. If you want to try rockered frames there are cheaper options than Wizard from Endless, NN, Rockin', and Roka. And it seems like there are new brands coming online every month. I think the budget entry is the K2 R100 - 4x100mm with adjustable rockering. Or during rotation, flip your wheels without changing position to develop a natural rocker (maybe first and last if you have a particularly strong toe flick which causes faster wheel 1 wear).

hi, really a good review, but i want ask you the side. i have 263mm feet and i use a rollerblade rb pro with 270mm (9US) and are perfect for me. with this what side i will try? i think the 8/8.5us will be too small, but the 9/9.5 maybe too large? thank you

Good review, would be nice to measure how wide the insole is for future review.

Dude, how tight are you tightening the cuff buckle?

What would you recommend… this or FR1?

How much do these skates weigh in kilograms? pairs US 8

The fit is true to size. I wear size 10 in Adidas and Under Armour. I'm 275 mm. I tried 8-8.5 and it was too tight. 9-9.5 was the better fit and therefore true to size.

Upload a video of you on a ride

I love my #RollerbladeTwisterXT but i ride my #RollerbladeRB much more ;-)

Shop staff recommend me these because of my (slightly) wide feet. Seems to fit well with my feet size and it’s really comfortable. I remove the thicker insole for the weaker ones until I break into them, then I’ll probably use the thicker soles.

Very nice setup. :) You'll see they feel a bit more like "wearing trucks" but if you mentally forget about it and skate normally they will respond as good as the XTs with its own quirks, one of them, you need to tighten the cuff a bit more or your ankles will take a beating. 4 to 5th strap notch. (I usually start a 3 cause the front plastics needs to sit for a bit) I just got the 4x80 rockered frame for my XTs and, ooooh man they're like 10 times more maneuverable, night and day, it is crazy but in a good way after you get used to them. A bit unstable mostly when striding and being on the front wheels, you'll notice a wobble but it seems is a self correcting one (it never went out of control even while going as fast as I could). I haven't tried going downhill under a bridge and honestly is a scary proposition. You're gonna notice a noticeable drop in speed. You'll quickly find yourself having fun slaloming and not so much accelerating fast. You can still achieve a good speed and depends on your technique with the new setup but the sprint you get with a flat setup is gone.

hey! if you can help should i get 8/8.5 or 9/9.5 my feet is 26.2cm but my feet are very wide😣

3:40 - FRs and SEBAs before them was offering users to cut that part - their cuffs had those marks with a scissor pictogram on them. Could Rollerblade be handled the same way or it's not something you supposed to do here?

Probably one great thing about the Zetrablade is the fact the frames are inbuilt. So no riveted two piece frame getting lose. These are probably great for cruising and freestyle tricks.

I want to know if these skates are actually lighter in weight than the regular Twister Edge? The original feel like 5-7 lbs, how much lighter are these Rollerblade Twister XT?

EUQERO PATINS EQITE PEDRO

you can actually remove the heel/boot from the zetrablades so you can wash it off, I have these too. I'm probably getting the RB pro X for an upgrade later this year

I'm size 42.5 and I got mines 43/44 cause someone suggested you should upsize one number on RB skates (the twister edge are true to size). I have the XT and the 3WD and they fit really fine. The heel pocket in these is really good and they simply stay in place. With or without booties they fit great, with 2mm booties my heels are even more locked. The cuff's front plastic is quite stiff at first and so far I use the second buckle notch and I go one more after stating for some time. The 45 degree strap doesn't need to be super tight in order to have the skate anchored to your foot. About the laces, you tighten a bit so they're tensioned but you don't need to pull too hard. Yesterday I took my 3WD for a spin searching for a nearby speed track and I just ended letting myself get lost in the city with my red Luminous wheels. (night, no traffic Sunday at 9pm/10pm around Salzburg city) so after around 2h I came home with a smile in my face, no pressure points, all the skating was smooth and got full control at all times. After resting for about 1h I just had the feeling I wanted to jump back on them and keep going. Comparing the XT with my old fitness skates (same wheels): These are considerably faster since they're solid on your feet and they're heavier than a fitness skate so when you throw your feet forward for the next stride you feel the skate weight adding to the momentum.