Пікірлер
@RobertD-ji9kp 13 сағат бұрын
I literally did exactly the same thing this evening. I plugged up a 20,000 mAh battery and a Ring indoor camera 2nd Gen (the small one) to see what the power draw was. It was steady after initializing around 140 mA, it went up and down slightly depending on motion capture or live-view. I previously ran this setup for over 5 days. Doing the math, it now makes sense.. a 20,000 mAh battery with a 140 mA draw works out to 142 hours of run time, or around 5.95 days. I did turn off the IR emitters on the Ring Camera, and backed off on other stuff like motion capture, which probably decreased the draw. If you hooked up a solar panel to the battery input port you could probably run the camera indefinitely. Ring has all this already, still fun just to try it and do the math.
@Appmyhome 12 сағат бұрын
the drok is really handy.
@mikewilliams5972 17 сағат бұрын
I have one but it the camera will not work if you don' t have a certain frequency for it - The frequency is 2.4 GHz and I don't know hoe to get it on my router - HELP !
@Appmyhome 12 сағат бұрын
the camera requires 2.4 so your router needs to support it. try pairing the camera near your router and then moving it. if you are too far away it may not stay connected. I also found their chat support to be very good.
@nanduk9 Күн бұрын
I have a lroblem in detecting obstacles..door gets closed instead of stopping..please let me knkw how to fix
@Appmyhome 20 сағат бұрын
you would need to call genie support for that issue.
@ajs3d106 3 күн бұрын
Can you comment on the longevity of the toner cartridges, on about how many pages you're able to print prior to having to replace them?
@Appmyhome 2 күн бұрын
we don’t know yet since they are still printing fine.
@ajs3d106 2 күн бұрын
@@Appmyhome - Honestly, I was hoping you'd say that.
@virtualwcm 5 күн бұрын
Cool!
@Appmyhome 5 күн бұрын
thank you
@stacybarnes3418 6 күн бұрын
Where can we find the lanyards? Thanks
@Appmyhome 6 күн бұрын
links are in the description.
@egimen25 6 күн бұрын
Hello, is it compatible with Alexa?
@Appmyhome 6 күн бұрын
according to the Tapo app yes. we haven’t tried though.
@jaywycoco1923 7 күн бұрын
Best straightforward review ❤
@Appmyhome 7 күн бұрын
Thank you Jay. So are you getting one? I see now they have a model of this where you can change the color of the lights.
@SolarizeYourLife 9 күн бұрын
You need to add matter to other platforms first then add to homey....homey doesn't give a matter share code in the software!!! And no, they do not give you the ethernet adapter. You have to purchase that separate from the $400 you just spent. Oh, in your case you didn't spend a goddamn dime...
@Appmyhome 8 күн бұрын
You are correct, Homey Pro 2023 does not provide a matter share code at this time unfortunately. If you want to have the matter device on more than one platform, you do need to pair on the other platform first. As for ethernet, homey pro 2023 does work well over Wi-Fi which is currently how we have ours setup.
@helenahippie2171 11 күн бұрын
My BRV- mini no turn off, anybody knows how turn off this speaker?
@Appmyhome 10 күн бұрын
Press and hold the button on the top until it makes a sound. About 5 seconds.
@evermiranda3672 15 күн бұрын
awesome Video, made life so simple, THANKYOU!!
@Appmyhome 15 күн бұрын
you're most welcome, glad it helped
@songvari 18 күн бұрын
That's exactly the type of review I was looking for. Thanks so much.
@Appmyhome 17 күн бұрын
you’re welcome. I use it around 15 min at a time while watching the rowing lessons on peloton guide. great combo.
@matthieuboulianne678 19 күн бұрын
Great review. What happens after a power failure? Does it default back to plug open or closed? (with or without energy?) Is there a way to control that ?
@Appmyhome 17 күн бұрын
well for some reason I can’t find the plug. if I do I’ll test and let you know. though I am fairly sure it remembers the state it was last at.
@ScoobyVRR 19 күн бұрын
Why are the things the same same like the armrest they both look like right?
@Appmyhome 19 күн бұрын
the arm rests are identical. you basically rotate the rest part depending on which side you mount it too. it was confusing to us as well till we figured that out.
@ScoobyVRR 19 күн бұрын
@@Appmyhome thx you
@Bluewillowskys68 19 күн бұрын
Lots of info here but you are talking WAY too fast for us to follow the instructions. Even with pausing and restarting you are saying 3 or 4 steps in a few seconds again so fast it's very hard to keep up. Can you some how slow this down, maybe record a slower version???
@Appmyhome 19 күн бұрын
Unfortunately we don’t have the lock available. They have a good website though with more info that might help. www.hugolog.com/pages/product-guides
@vmitchinson 22 күн бұрын
I purchased this probe yesterday. I went to their web site and all I got was a big sales pitch to buy the thing. I finally had to go to the chat mode to find access to the app. They sent me a link and I down loaded the app and installed it. Then more furtration set it. I managed to link the probe to my cell phone but can not access the cook programing. All I can do is read the meat temp and the ambient temp. When I tap the cook set up It goes to the instruction videos. Total pain in the a** HOW DO I ACCESS THE COOK SETTINGS? PISS POOR PROGRAMING!
@Appmyhome 21 күн бұрын
first make sure the probe is out of the case. make sure the green light is on in the case. then you should see the product go from dimmed out to full bright. once you click on the product graphic you should see Set Up Cook. Click that and select the type of meat and so forth. Remember, the case needs to be near the probe for the phone to connect. lets us know if this helps.
@parkersavage6224 23 күн бұрын
great video, just got this for a good deal at staples. had some issues with the manufacturing and the holes already in it, but i got it working.
@Appmyhome 21 күн бұрын
Awesome.
@joestuyo 24 күн бұрын
Awesome! this was super helpful. Thank you so much
@Appmyhome 23 күн бұрын
nice to hear, glad it was helpful.
@tincanboat 25 күн бұрын
your sodium was on the low side of good
@mitavoz 25 күн бұрын
Do you need to pay for anything? I mean anything at all? Some systems dont allow you to view videos if you dont pay subscription… is this the case??? Or you can see anything recorded in the microSD card???
@Appmyhome 25 күн бұрын
No subscription required. Just plug in a micro sd card and access your camera and recordings from anywhere you have internet.
@lafnm1869 25 күн бұрын
Sooo did it work?
@Appmyhome 25 күн бұрын
yes it worked.
@pepecaleh6716 26 күн бұрын
Can you show a video how hard it blows?
@Appmyhome 13 күн бұрын
It is so quiet that the background noise in the house is louder. I’m not sure we can capture it on video.
@radmlt 26 күн бұрын
Does the camera head swivel from left to right please ?
@Appmyhome 25 күн бұрын
yes, you can rotate and tilt. manually of course:)
@ProverbsSixteen3 26 күн бұрын
Your picture looks...all of mine comes out blurry. Any ideas on how to fix?
@stanleyjohnson5453 26 күн бұрын
Great Job; Thanks for
@Appmyhome 16 күн бұрын
You are welcome!
@KalySophieWhite 26 күн бұрын
Is there a video that shows how to replace the drum?
@Appmyhome 26 күн бұрын
We haven’t had to do so yet. Did find this video at the brother site that might be similar kzfaq.info/get/bejne/j76Ka7OkzMmVpaM.htmlsi=hYXBd8bcSKqC-j9R
@MikeBeeTV 28 күн бұрын
Okay, I have to share this with you because we're like printer bros now: this is NOT a laser printer, it's an LED printer. I was suspicion of the "laser like quality" verbiage in the product marketing. If it's a laser printer why the obfuscation? Why not just say it's a laser printer? And I was right! This, and many like it, are NOT laser printers, they're LED printers. It's a marketing thing. Everyone knows what a laser printer is but no one except old people like me remember LED printers. Ironically LED printers are economically better: drastically improved longevity, much lower product cost, and lower maintenance. But it's not a laser printer. And I don't care. It's a shame they have to be so deceptive in marketing since printer makers already have such a terrible reputation. I just had to share this with someone and my cat just doesn't seem to care no matter how many times I explain the differences.
@Appmyhome 28 күн бұрын
That is why we say “laser like”. We almost didn’t get it until we researched more. We can say the output is really good.
@ajs3d106 3 күн бұрын
Thanks for this. I was wondering what that was all about. Vehicle manufacturers wouldn't typically highlight "... can totally achieve highway speeds..." since that's kind of a default function of the product. Presenting a laser printer that's capable of "laser quality" printing tossed a big red flag. I was like, "Well, it's a laser printer, right? Why wouldn't it be able to achieve laser quality printing!". lol. And now I'm off to research what LED printers actually are and why achieving laser quality is such an obviously big deal for them. Thank you.
@anoyakashi8775 29 күн бұрын
When the Homebase 3 stops, you have no security devices recorded. when you are on holiday, there is no way to reactivate your homebase 3.
@Appmyhome 28 күн бұрын
This is one issue with local recording to a single box, though keep in mind there are other devices in the chain that if they stop, like your router, will prevent recording. We use a digital loggers power strip that can sense if the internet is down and cycle power on a device. You could also put a smart plug on the homebase and have it cycle power every night or on demand remotely. Keep in mind recording to the cloud won't help if your internet is down, or the power to your home is off. Of course aside from the power issue, if you just record to the individual camera, when the network is back up you should be able to retrieve. That's the choice you need to make when defining your camera solution.
@MikeBeeTV Ай бұрын
Something happened to the video when you entered your WiFi password can you post that in the comments? Thanks. Oh, also how many pages do you get from the starter toner cartridges?
@Appmyhome Ай бұрын
Hi Mike, not sure what you mean about something happened, what is it you are looking for? So, so far we haven't had to change the cartridge.
@MikeBeeTV Ай бұрын
@@Appmyhome I was looking for your WiFi password. It would also be helpful if I had your mother's maiden name, SSN, CC# and expiration and the code on the back. 😜
@Appmyhome Ай бұрын
LOL Mike.
@MikeBeeTV Ай бұрын
@@Appmyhome I literally just bought this printer, like five minutes ago. Refills are expensive at $150, on average, and I saw some say "with chip" so do you have any idea what that means? I'm furiously googling now... Found it, the ones without chips require you to remove "the chip" from the original cartridges and the ones with chips don't. Sounds legit.
@Appmyhome Ай бұрын
I can see why you ask. keep in mind each color will expire at different times depending on the colors in your prints. Brother obviously are the most cost but then if you get the off brand you would risk issues as brother of course points out. like I said since this review we haven’t yet replaced any of the cartridges.
@AlexRocks24-7 Ай бұрын
Wow
@Appmyhome Ай бұрын
Yeah, it is a pretty cool camera.
@SERGEKASSA Ай бұрын
Amazing explanation, Thank you very much for the video!!!!!
@Appmyhome Ай бұрын
Glad you liked it!
@LiamGallagher-ts2vu Ай бұрын
How am I supposed to fix it if it’s jammed
@Appmyhome 29 күн бұрын
we haven't had that happen yet. has Kodak support been any help?
@LiamGallagher-ts2vu 29 күн бұрын
@@Appmyhome I read the manual but it doesn’t give me the correct instructions
@carlomicillo9637 Ай бұрын
Very nice video, I also purchased this Robot, I have a polished porcelain marble effect floor (Carrara). The first wash carried out with the maximum water level, everything went well, without streaks or streaks. Now even at the minimum level it seems to leave puddles behind it, what could this cause? Thanks in advance for your help
@Appmyhome Ай бұрын
That is so interesting. I wonder what would cause it to use so much water. As you see we have tile too but not as smooth as yours. Maybe the sensor isn’t reading the floor type correct. I see in the app that under maintenance that they recommend cleaning the sensors and shows a graphic on where they are. Have you set the floor type manually? Also has Roborock support been of any help?
@ashleelinn1791 Ай бұрын
Have you figured out how to connect the LED strips without the remote without the app?
@Appmyhome Ай бұрын
Have not tried that. Once we set them up we've just been using them as is.
@davek5899 Ай бұрын
As cool as the knock knock feature is, it seems like it would be more useful on a side-by-side fridge because it's going to show you what's inside only on one side in a french door fridge.
@Appmyhome Ай бұрын
The idea of the knock knock is about what is in the outside part of the door. It's where we keep the butter and other condiments. This obscures what behind on the regular shelves.
@anialiandr Ай бұрын
where is the dirt gathered inside of the vac?
@Appmyhome Ай бұрын
the robot holds the dirt inside the small water and dust bin at the back of the unit. Then when it docks it sucks out the dirt back thru the bottom of the robot where the rollers are. It's a pretty cool design. The dirt is pulled out into that tower inside a vacuum bag. The bin at the back of the robot is removable so you can add water for mopping.
@williamricardobonillavilla1808 Ай бұрын
I love your videos guys ! Keep going.
@Appmyhome Ай бұрын
Thank you so much!
@justindonaldson3763 Ай бұрын
Hello, is the Ethernet cable connection needed in order for the home base to get a signal from the cameras ?
@Appmyhome Ай бұрын
You only need the ethernet connection when setting up the S380. Afterword you can disconnect the ethernet and just use WiFi. They walk you through this in Settings->General->Connection. One thing when you do pair the cameras, when they say have the camera close to the Homebase make sure you are close. Then you can install them where you want them.
@justindonaldson3763 Ай бұрын
@@Appmyhome Thanks for the information. Also, is the signal strength stronger with the cameras being connected to the home base versus WiFi ?
@Appmyhome Ай бұрын
the homebase connects to cameras either directly or via your router. they have a function called multi bridge that will optimize which method to use. they show you a map of which camera connects which way. in any case, there is no signal strength indicator I could find.
@MaxwellHay Ай бұрын
That is kind of loud
@Appmyhome Ай бұрын
yes, you can hear it but it’s not too loud. did you watch our review of it.
@jonathangermanos2607 Ай бұрын
Really helpful video guys appreciate the help!!!!
@Appmyhome Ай бұрын
you’re welcome. glad it helped.
@ottoperez5964 Ай бұрын
Most boring review ever 😂. Not really a review if they have to sell their opinion.
@Appmyhome Ай бұрын
the machine works great. taste is up to the person.
@lincolnbliss4885 Ай бұрын
I bought the same chair yesterday from Staples for 65 percent off. But when I was assembling it I ran into an issue. The top right socket that bolts the back of the chair to the base wasn't fully tapped. The bolt would go in perfectly fine for 2 turns and then it would stop. I thought it was just the thread locker but after reefing on the bolt and backing it in and out to make sure it wasn't cross threaded I realized that the socket was defective. I drove back today and exchanged it for another one but when I tried to assemble this one I had another issue. The manufacturer gave me two right side arm rests instead of a right and a left. I was about to take it back again and just ask for a pre assembled model but I realized that the arm rests were made with identical parts. The manufacturer just put the top part of the rest on backwards. I took it apart and spun it 180 degrees and while I was there I cut up some of the packing foam and stuffed it in between the hight adjustment rails to get rid of the slop in the mechanism. I did the foam trick to the other rest as well. So far I'm happy with the chair. It's great quality for the price. Just wish the manufacturer had better quality control.
@Appmyhome Ай бұрын
very cool.
@obliquecolumn834 Ай бұрын
The most important part of this inflators is what adapters are used and in what order on the schrader, presta valve etc. None of these inflator manuals describe nor show this. And it is not intuative. I am a life-long bicyclist and I can`t figure it out. Just today I bought a Sakaki inflator, highly rated but manual gets no clues of how to adapt the end of the hose to the schrader value or any other. A close up picture of this would be a world-wide service. Thank--you for any assistance
@Appmyhome Ай бұрын
hi agree sometimes it is confusing. in this case there was a brass tip threaded on one end and the other has an o ring inside. that is the side you put over the shrader. just screw in the tip to the hose.
@Mefistofeles_ Ай бұрын
Thank you for your review, it has really been very useful! I'm just trying to convince my family to buy one of these. Greetings from Spain!
@Appmyhome Ай бұрын
thank you, great to hear it was helpful. good luck convincing them to get one. it is really nice.
@reverendblkgrape1 Ай бұрын
Does the homebase ring when the doorbell is pressed or does a chime need to be purchased separately?
@Appmyhome Ай бұрын
You can set the homebase to ring, you can set the volume and select the sound. If you have an Alexa you can even have Alexa announce.
@irel1973 Ай бұрын
can u tell me what sd card u used thanks in advance
@alostsoulforaq744 Ай бұрын
I have other TAPO cam and using SDXC, you anything Class 10 or any with highest read/write speed.
@birdfy_by_netvue Ай бұрын
Hi! Thank you so much for sharing your video introducing our dual-camera hum feeder! We’re thrilled to see the beautiful hummingbirds and to hear about your experience. Happy birdwatching!🐦
@Appmyhome Ай бұрын
Our pleasure!
@raulambriz2203 Ай бұрын
No one shows how to plug it in or what you need to make it work 😂
@Appmyhome Ай бұрын
check out our Quick Look. kzfaq.info/get/bejne/mbhdg5BknsDIZGQ.html
@user-wy4yd5hi4v Ай бұрын
Hi I have two monitors that supports usb-c and HDMI. I would like to plug my MacBook Pro. I would like to charge my MacBook from my usb-c monitor. Is it possible?
@Appmyhome Ай бұрын
looks like the usb is only for power to your MacBook. I would reach out to Belkin to confirm.
@K.D.Meyers 2 ай бұрын
"Alexa, close Mark's window." AAAAEEEAUUUGHGGUGGJEHHEEHGHAGAUAUAHAGHAG 👹👹👹👿👿👹👹😈👿👹😈😈👿👿👹👿👹😈😈👹👿👿 ✨🎶*dootdootdoot*🎶✨
@Appmyhome 2 ай бұрын
LOL. I do wonder if Alexa would require my voice only or if anyone could do it.