where can i obtain a schmatic and trrret board latout be more willing to pay for it in the process of a 6g2 prenston build this is so addictive love playing harp plat through a VHT for now but i really want to build the premier 8
@pkontopoulos16 күн бұрын
Excellent and extremely useful educated info into hum of tube amps. A question please. I have a class A SE UL stereo amp I am designing that has a NFB from speaker 16Ω tap to the 12AX7 preamp cathode. I get a light hum that peaks at 100Hz and 150Hz acoustically analysed. If I input 1000Hz I see the envelope of the output modulated possibly by this hum. If I do your nice advice I will probably have two signals added at the cathode of 12AX7 (one is NFB and the other fro R hum resistor). Will that work? I will certainly try but is it possible?
@osamagad416622 күн бұрын
Really amazing video thank you so much
@osamagad416624 күн бұрын
Where i can download the program please
@TheStephensjoshua26 күн бұрын
Very Consise. Nice job.
@gitarrizmoАй бұрын
Great playlist. Could you verify that you mean micro Farad even when you use the milli abreviation as in mF? After all you talk about mu as in μ. e.g. 100μF read as 100 mu Farad compared to 100 mF also read as mu Farad although SI-convention in metric is milli Farad for mF and microFarad for μF.
@jimcastillo8950Ай бұрын
Hello, I have a Fender Vibrolux Reverb Custom in which I removed the circuit board and replaced it with a eyelet board just like they did back in the day. I didnt have any problem for some time and I started to get a squel at times and buzzing and then disappear. I did notice that it followed from the normal channel to the vibrato channel and then I removed the Phase inverter tube and replaced it with another tube. It was gone. I had a old RCA nos tube in the PI socket. thanks for your video......
@fkitchАй бұрын
Very informative, thank you. Hope you enjoyed Sevilla ;)
@kilcarАй бұрын
Thank you! All of this info and other videos youve done are so valuable. The safety aspects are essential.Being a " newbee" I really appreciate it!
@kilcarАй бұрын
Youll not find any " UL". or other certificates on these Communist Chinese manufactured devices. China does not care. It mimicks, copies snd plagiarizes everything the West or the industrialized East produces. I have the identical variac, and from almost day one outlets fractured, fuses were blowing, and there was substandard quality for such an important device. These items are a clear and present danger to ones health. Thanks for the expose' this will save lives.
@deuce-way1440Ай бұрын
I still have hum in my push pull build using this setup, any other tips for dc elevated heaters?
@deepblueharpАй бұрын
I will share some general information because I don't have a photo of you chassis. If you still have hum, the top issue is generally wiring. The wiring must be absolutely neat. If you look at a Fender Deluxe, you will notice all the wires are no longer than required to connect between 2 points. There must be NO EXCESS wire. Excess wire acts like an antenna to pick up noise from the B+ or Heater wires. All the wiring needs to be laid flat against the metal chassis so the chassis can absorb and ground out any interference that is causing the hum. If a wire needs to cross another wire it must cross at a 90 degree angle. Also, do not run any wire along the side of a component (cap, resistor, etc.) Wire must cross over the component at a right angle or not at all. Wiring at a socket or a pot is a challenge because that last inch at the lugs requires running wires in parallel. (UGH), but just 1/8 inch of separation can make the world of difference. Tube amp wiring is challenging.
@kd5ozy2 ай бұрын
thank you so much for your research. very helpful
@LuChen-fw9xc3 ай бұрын
Thanks this video clearly explained my questions!
@xaz70883 ай бұрын
could it be done in a PI to PP output stage?
@dadebeb8103 ай бұрын
Sir this was confusing me a lot, so there is no simlpe formula, to find wire temprature, unless we get them expermentally, but now we can aproximate all by saying for example,the energy in,I*V, Which is dependent on the resistance of the wire, determines the temprature of the wire, assuming all other things are keept the same for identical wires( nichrome 80 or 60) of different length and diameter( eg 0.9mm and 0.7mm) Thanks you for the best explanation and insights
@deepblueharp3 ай бұрын
Metal is a sponge that soaks up heat. Therefore the calcs must be done over time to get how much heat is soaked up between each time interval. Wire temp is not a single calculation like converting degrees F to C. The graph I show is required because air "boils" on the surface of very hot wire. As the wire heats, more air boils faster.
@alexsalapan63293 ай бұрын
The "BONUS" is kinna cute. 😂😂😂
@mikemoyercell4 ай бұрын
I stay away from all newly made Russian tubes. The only Russian tubes I’d use are the old Soviet Union made Reflector tubes from back in the day. Otherwise I only use USA made NOS tubes. I also try to get the JAN tubes when available and priced well.
@bigstick52784 ай бұрын
Do you have a web link on the steps and part involved? I would like to keep my 65 BF Deluxe Reverb alive.
@dumpsterchicken62874 ай бұрын
I have a question. My output tube cathode has the parallel resistor/capacitor, but not the other resistor to the cathode. Can I attach R hum directly to the cathode? Thank you.
@TimpBizkit4 ай бұрын
If you're boosting 15kHz by 17dB and 10kHz by 15dB then maybe they should have put a tweeter where the Bose logo is. An Eminence APT80 would do nicely. What's particularly worrying is the 14dB boost at 60Hz. It's a good way to get speakers making farting noises as you turn up the volume.
@amazontheonlychoice19285 ай бұрын
Good
@pipercherokee85986 ай бұрын
Would the same steps apply to trying to diagnose 180Hz hum? Not entirely sure where it is coming from, but it is present with all knobs at minimum and nothing plugged in. The hum then increases with the REVERB knob, even with volume at minimum. Interesting. And, it is present even if the reverb tank and footswitch are disconnected entirely. Thoughts? '65 Princeton Reverb clone. Thank you, your channel is very informative!
@deepblueharp6 ай бұрын
Please send me an email (see my KZfaq channel). I am going to need some more information and maybe a sound clip for analysis.
@tubehead43457 ай бұрын
Hi, my phase inverter doesnt have the out of phase signal, both sides has the same wave, could help me? Sorry, but my english is bad.
@IamBrian3697 ай бұрын
Hi James. Thank you for this great lesson on speakers. This is fascinating as I never heard this from any techs. I have all my speakers in parallel. Can I just reverse polarity on 1 of the twin cabinet speakers or 2 of the 4 on my bassman speakers?
@deepblueharp7 ай бұрын
Yes you can. It will be a bit of experimentation on bassman. Reversing 1 the polarity of 1 speaker should be sufficient.
@toddlogan90238 ай бұрын
Any suggestions for volume being cut as depth is increased with a preamp bias wiggle
@kevinbeckenham38728 ай бұрын
Thank you for explaining how get rid hum, in my ferrograph series 4 valve reel to reel tape recorder
@mozilla25768 ай бұрын
Thanks for the drivethru of the Bassman.
@BluesMan12348 ай бұрын
As an electrician/guitarist that has gotten into electronics and amp building, this is an amazing video with lots of interesting information, really well presented. Thank you sir.
@triclone1239 ай бұрын
I love it. Thank you!
@jeffm81229 ай бұрын
Hello, it was a nice surprise to see a new video from you. I really like the depth to the detail you go into, others perhaps may not bother to do so. I have followed all your videos and found them very informative, in particular the feature you did on the Fender Deluxe and your own Premier Twin 8. Regards, Jeff.
@Djlinooooo9 ай бұрын
Hi, where I can buy the input output board, do you know the part number for the board?
@deepblueharp9 ай бұрын
I used to buy repair parts from MCM Electronics. However, they are out of business and are now owned by Newark Electronics. Newark does not sell parts. Which means you need to find parts on sites like Mouser. MCM was great for getting OEM parts. sigh...
@dancoe44899 ай бұрын
Awesome, thank you 😁
@jetblakink9 ай бұрын
This is absolute GOLD!… Thank you so much.
@glenng.82549 ай бұрын
Had this happen on a Collins KWM2A, on 6AZ8 that acted as 3rd transmit audio amp and second stage receiver IF. When I turned down the MIC gain, it was a high pitched squeal in receive mode. Yes, it had a cathode follower. In my case, I had just replaced the tubes. re-capped and cleaned the tube pins. I got rid of my squeal by swapping out another 6AZ8, however, I'm sure the initial cause has to do with re-capping, or perhaps just a bad tube. If it returns I'll put a stopper resistor on the grid. Also, I found a great way to locate a squealing tube is to simply place your hand near it, fingers around it (your fingers make a great inductive tuning capacitor) and it should change frequency as you move your fingers around the outside glass. Thanks for the advice.
@rokagrooveradio842910 ай бұрын
Hi mate, I`ve got the same Mackie sub & I`ve hardly used it tbh & at one of my gigs we had set the sound up before starting, then it started making like thunder noises even when it was turned down etc, sounded just like thunder, do you have any idea what the issue is, and could that be a solder issue aswell?! Thanks again for youre video, thanks Paul
@peaceofvideo10 ай бұрын
Fantastic resource! Every instrumentalist should watch this
@EnmandsBand110 ай бұрын
I have a similar issue on my VHT Special 6, it helped a bit to move the output wires away from the preamp but it still sounds terrible. I have changed all the caps (amp is 13 years old) but no luck, any further ideas? kzfaq.info/get/bejne/Z5l4fcqbvceVeIk.html
@deepblueharp10 ай бұрын
It sounds like a hum. I will need a clean 60 second audio clip to process in my software. Please email me for details.
@dalenassar915210 ай бұрын
GREAT video!!! I am using 18 gauge nichrome wire as a dummy power resistive load. Do you know how a maximum current or wattage load can be calculated for a given nichrome wire, as not to damage it? For example a 1 meter length of 18 gauge wire in air at room temperature? Similar to the way nichrome wound power resistors have power ratings. THANKS MUCH!!!
@jcorteziv11 ай бұрын
Where do you recommend ordering these replacement parts from. I have no power past the fuse.
@krzysztofwaleska11 ай бұрын
Nice, but very different from what I was teached at school. Result is the same. That in the middle is totally different.
@kylew70611 ай бұрын
This is gold!
@paulj0557tonehead Жыл бұрын
I remember the first time hearing a Bose 802. I was 12 and it was Easter Sunday 1978. I was at King's Island in SW Ohio (you remember the Brady Bunch ep where cardboard tube with Mike's drawing gets swapped with the poster...). Anyway, I was sitting there eating an elephant ear concession snack with my parents and little brother, when up comes this little impromptu, 3-4 people music singing group with pre-recorded backing music. Their sound system was portable, and I just remember sitting there hearing the small Bose box with two holes pouring forth the cleanest most perfect fidelity I'd ever heard. I was a technically minded kid and yet I was absolutely baffled by what could be in that box, not knowing it was just speaker cones. When I did finally learn this it was 10 years later. It made me realize the significance of giving the consumer a mystery to keep them guessing.
@dannynelson1213 Жыл бұрын
Exactly what happened to mine thanks!
@garycnielsen Жыл бұрын
Thank you VERY much for this video and remedy! My Mackie SRM1801 wasn’t working and your instruction totally fixed the problem. I had to install and solder in a new post/clasp cause one was fried. Cleaned up the contact points, soldered the heck out of it for a strong connection, put it all back together, and BOOM, back in bass business! Now we’ll see how long it lasts because I do push my subs pretty hard! Luckily these are just my old, back-up subs. 🤘🏼
@giulioluzzardi7632 Жыл бұрын
Thank you very much, that is a very helpful tip! Cool.
@JaykeSapalaran-iq3qs Жыл бұрын
Great video tutorial ❤ thank you for sharing your knowledge and experience 🇵🇭🫡
@sergiovanetti8851 Жыл бұрын
Thank you, that was I need to place my transformes in my tube amplifier.
@rlibby404 Жыл бұрын
"I recapped the amp, I changed out the carbon comp resistors, the tubes are new, hopelessness starts to set in..." 100% accurate. The fifth step for me (prior to watching this video) was deducing that by performing these updates on a 50 year old amp, it was now more powerful and thus out of spec compared to the original design. Thanks for the help!
@LarsonGuitarPlayer Жыл бұрын
Will save this and watch again when needed. It's a next level knowledge for me. Gonna let this sink in. Thanks! ❤