I bought a green tip that is for 8-10 gallon pressure washers for my 2.0 gpm pressure washer from Kleen-Rite and it draws soap from my standard and high draw injectors at 1-2.25%. So with an M5 modded... well... I will be able to add SH from my square 5 gallon bucket and boost the injection amount of 1-2.25% with what ever I can get from the X-Jet. I also have an MTM foam tip... So if I want to put a hot foam (stay where I spray it) mix on a roof... I should be able to get high enough concentrate to clean with out breaking out my 12 volt. I also have a 24' kevlar carbon fiber pole that can use to put SH almost anywhere on any home without blasting up from the ground.

hiya - love to get one of those Aero's. u mentioned you might have a good contact \ pricing ?

Hi! My aero pump similar to the one in your video was working fine with the compressor tank but suddenly it wont suck water anymore and now is making a weird computer noise when the compressed air flows right in the "brain"? I dont know the name of the part the one that looks like an electric servomotor, i dont know

if a pump costs 3k USD, then everybody should start manufacturing these. That's like free money on the street lying

Hello where do you get your replacement/maintenance parts from?

What distances are you hitting with this set up ?

Great😊

that little gas line that hooks under the carb on front is about impossible, really only hard thing about this change I struggle with. 2nd time doing it now, your vid is about the only one that actually shows this, thanks!

Man you know this video is 6 years old when you hear “20-30 bucks in fittings”, today this would be like $80-90 in fittings haha. Still great though.

So where’s the video on how to clean it with cleaner

Very cool! I'll be adding that as an up sell for my clients!

The music man iz terrible ! The video is so informative that it doesn't really match with the music.

Great video. Thanks for the helpful information

Great video

Just subbed up and liked video

Hey there how can I find the parts to make this t if u can share the name of the material need plz thank you

Am interested in getting a pump

This video was very helpful. Thanks

Why can’t you just lower the pressure at the machine?

Garbage. Restricts water flow too much causing overflows. Had to climb a ladder in a thunderstorm to rip these things out. Great design that unfortunately does not work. Do not buy!

Lori is the best

Women's hiking boots

If I have to transfer a thick oil would you suggest one of these style pumps? I have to transfer 1000 gallons of heavy viscosity oil. If you had any insight that would be wonderful.

Couldn't you technically do this with a 24ft telescoping pole out of the trigger. For church steeples etc.

Do this modified x jet take away from distance to reach high spots?

Can anyone tell me how to extend the reach. I bought 50 ft of hose for the x jet because the short one it comes with is way to short. I need a way to add the valve to the new 50 ft hose

was this going into the ground ? or was it free flowing at the ground level? Plus how long was this not cleaned.

Will it dilute without using proportioners and by how much? Ty

Is a 1" pump worth it? Because you have to choke it down to 3/4 or more so does it really give any more volume?

This pump prise please reply mi

So you dont actually tell us shit about the pumps, you show us some seriously drawn out info on the one pump, dont tell what sort of air supply is required ie cfm psi etc gph or gpm psi the things people want to know, how about vac or lift height and flow rate and psi at said lift etc

So what gun/lance can be used

That is a slick setup and looks very sharp. Glad you switched to the camlocks and are loving them. However I wonder why you didn't use a 2" strainer right off the tank? Only thing I can think of is to not strain your dump line maybe? Thanks for the video. Maybe you can do an update on your current setup.

Thank You’ll for information and advice Seems it’s best to keep a clean carb handy Saves time

Those brass adopter what are they rated for like psi. Does that even matter.

👍

How big does it have to be to run 2? I have a 4gpm

What tips with 10 gpm!?!

7 years later and no follow up on the usability and durability of the Banjo 3/4" and 1" ball valve review. How did they work out for you?

Hello thank you for the video! My pumps keeping getting slower and slower until ultimately they stop pumping, we do have some water in the air line sometimes because our air filters are shit. But Do I need to buy a rebuild kit for the center body or can I just lube something up?

too heavy weight for brass carving

Well what the hell do you expect when you neglect your gutters? I give the gutter stick a 2 out of 5

What connections do you use to connect the suttner gun to pressure hose?

Hey, I put in my new cheap carb and it worked! I had a thought, ....I bought a different used gx390 and the old man said he had only used super high oct gas in it. He had stored it a long time with the gas on, and I thought, uh oh, carb probably flooded or will need cleaning. It started up on first pull. With the gx690 seemingly prone to failure from clogged jets, I am considering using only super from now on, ya more $ but if I never have to change carb again maybe worth it.

why do you think the 690 carb keeps going out? is it a bad design? my gx390 25 years old never any problem

Hi, thanks for vid! the springs and linkages seem to have to be transferred from old carb to new carb. hopefully i can figure that out. I bought a regular cheap new aftermarket carb from amzn or eby, wonder if it came adjusted already, I can't believe honda 690 carb went out in one year, my gx390 is 25 years old no issues with engine ever, hmm

does anyone know where to get those buckets seen them everywhere cant find them anywhere

Will this work just as good on 2.3gpm machine? I am newly into pressure washing

Just subbed, thanks for your help. The link doesn't show you the kit,is it possible to share again...thanks.

I think, the easiest way for maybe 90% of people, would be the worm one (that just need a flat screwdriver to set it), because is extremely easy to tighten or loosen, the one in this video is useful when not wanting to damage something with the slots, but mainly, when you want clamp of a not too common dimension, either tiny or big ones that you can not find them on stores, example, when you want to clamp something to a high voltage pole, which is about 14" diameter or more.