Mine is for sale in Missouri - love it but its too big for my family members to use so I need something else!

Solo lleva dos mandos ?

Tq sir good roller

How much?

Pretty keen to see a bit more effort being put into high flow aux in this excavator size.

What wood you tink about torodial hydraulic travelmotor

Thanks for nice video. Volvo has both electric excavators, an Trucks, and Scania have ekectric trucks as well. 😊 Nice job CAT 😊 Good luck from Sweden.

Sounds nice but that horrible thumb design is distracting

I bought the 35dxz

What percentage of jobs require 24/7 operation? Maybe could use telematics to find best use cases? Would be quieter and easier to operate with less vibration. Less fumes

Will this run all the same attachments that a bobcat uses?

Damn...want this so bad

why even bother with a microphone when you are gonna make it left side only?

How would it work for logging equipment, where they're left on site for extended periods?

Well I bought an s t 50 and they are junk cold after code after code it is in the shop more than in the field

I need that cockpit to eject like on an F18.

Develon now needs to develop a Compact Track Loader

I apologize to anyone who likes skid steers in advance of my comments. This CASE thing has the same exact problem as every other skid steer. You sit too low in it, and the visability to the sides and rear is terrrible. I have a CAT skid steer with rubber tracks. I hate it. It is near dangerous to back up on a jobsite compared to an actual dozer or real track loader that you can see all around you. It never runs right due to that stupid Perkins engine instead of an actual industrial engine made by CAT. Plus they are weak weak. Sure you can attach 1000 different implements to the front of it, but most of them don't work very well. The bucket on them is too small. They don't hold very much dirt. The rubber treads wont get the traction of steel tracks, and they get torn up if you aren't on smooth grass. They don't dig well at all. The grapple bucket is pretty nice, but an excavator with a thumb does about 10x as much work. Pallet forks are nice, but you can't see what you are lifting, and you can't get out of the cab with the load lifted. Some kind of bushhog or mulcher might be good but not compared to a real ag tractor. You think you can load trucks? Please. Maybe one of those little dump trailers you tow behind your pickup truck. You will be looking through the ceiling trying to load a tandem dump truck, and it will take about 50 buckets full and 45 minutes. A skid steer is a joke compared to a dedicated machine like a dozer.

Utter politically-driven nonsense! The very idea that folks take this seriously speaks volumes about public education, in general. Having spent a career in the EE field, I can tell you that there will likely never be a battery power source available to the public that can do what is expected of construction equipment; namely, work under extreme loading for as long as you supply diesel fuel to it. There's no doubt in my mind that CAT can demonstrate the capabilities of battery-powered machinery - under ideal conditions - but when it comes to operating this type of machinery in extreme weather conditions, especially in extreme cold, there's simply nothing presently available that can match the [practically unlimited] performance of diesel-powered heavy machinery ... and don't even get me started on operating electric machinery in remote areas.

i have a 1998 link belt 2700q with free swing so how is that new

😅

Impressive.

Will never work in the mass market, try to go woke, get broke.

All electric is not the problem. The problem here is how do you program and control it so it can work autonomously. If you solve that problem, then they will have a killer app but without it this is at best an extremely niche product that is likely little more than a marketing concept, not engineering reality.

It may be the “future,” but no one was paying any attention to it. If it’s pure electric, you’ve made a mistake.

What’s the cost.!! And resale value.!!

The speaker for the Bluetooth needs to be moved. You can't talk to nobody on the phone. The machine is too heavy in the back. It will pop a wheelie on steep inclines and not that steep. The counterweights will not help that machine. It is already overweighted for the horsepower of the machine I've operated about every machine out there and this machine seems to be delayed on the joysticks similar to some caterpillar skid, steers and extremely jerky no matter the settings you do to the controls

I'll just take a standard tracked skid steer. I don't call them compact track loaders. No one does lol

Name change Just as the Brand has become accepted !!!!!!!- Is moronic !!!!!. Surely they could have thought of something Better than Develon !!!!!!!!!!- Sounds like a Cosmetic FFS !!

I've been operating a 2.5tonner , the seating position and lever location is way wrong, the cross bar at the front blocks your vision when digging, the blade lever is in a ridiculous position and the hand controls have a really awkward shape. And no cup holders or spot for a pho for a phone

aren't these just rebranded sumitomo?

3cx is king

Will there be a bigger version?

ویلڈن ایکسیویٹر مشین

I am in north western On. Canada an i looking at buying cash the 100. 6hp ST50 unit heat an air. Only problem is i been around heavy eqipment all my life an never seen or ran this brand. I got a qoute for one an a bunch of attachment totaling 190k but they dont have any stock or a demo. I trying to find out all i can as writing a check for 200k a lot of cash for site unseen. Not many option here. It ether this ot cat, bobcat. Kabota an i hate kabota with a pasion. The worst to work on. Worst for dirt traps. Ext. Or case. Or asv.

I am in north weststern Ont. Canada and i looking into buy this brand in the 100hp track loader. I got a qoute from our local dealer Hood logging. With a number of attachments needed for my farm. I been around heavy eqipment all my life and never seen this brand. Sad part is the dealer dont have one in stock to demo or even look at. I dont like buying site unseen. Specaly something i have never run or seen. The photos dont do enough. They sound like a great unit but i am looking for feed back before i write the check. After all 200k a lot of $$

Picking one up tomorrow, my first new machine !! Going to be nice to operate something new 👏👏

like your video. i bought a used 2017 wacker Neuson sw16 with 1900 hours used. i have two codes appeared when i used it. one is 517125:26 and the other is 519533:5 can you tell me what it is ?

I have the Ditch Witch SK1050 in southern Arizona and there is problem with radiant heat from the radiator, so I have no idea what he’s talking about. I love having the ability to step off my Ditch Witch and still operate my machine from the ground. As far as the joy stick controls for travel the single lever is optional, it’s your choice.

does it have a stump grinder that you can get for it, its just universal you can use bob cat stump grinder or any mini skidsteer grinder or other attachments

👇 'promo sm'

Looking at buying a 58 in Rochester ny who sells near me

Non-planetary gearing system ?? 🤔☹ No wonder it's a 100hp.......

Wish it could lift more, but it's nice for a light job.

How do you charge these things when your working back in the bush for a few days or in a pit, not very convenient.

So when we show up on a bare piece of land with no infrastructure (no electrical power) to prep the site for a building at the end of the day we will have to trailer these electrics back to our yard to charge overnight? What about when we have jobs out of town? Out of state? Would it be better for us to have a generator truck with a propane or nat gas generator to power up charge stations so we can charge at night? !

Hi we purchased one of these machines in may. Our only complaint is the amount of play in the slew. It’s extremely frustrating, and hearing back from doosan today that there not going to do anything to fix it, it’s very frustrating. I don’t think any new £70000 machine should have this issue. Any suggestions or have you heard of any problems like this any other excavators?

I learned my lesson on how Kubota does not honor customer loyalty after my 4th new Kubota purchase (a SVL90) self destructed at less than 600 hours. I now have a CAT and find it to be 10 times the machine the Kubota was!

How much is it

Only Japanese mfg’s understand the benefit of the slide up door!! I put my name on the wait list for the -3 & can’t wait until the 97 gets updated I will be def getting 1 too 🤗