Great video! Do you guys stock Easton Bully vanes?
@barryjoyce501716 күн бұрын
Great video! Simple, accurate, and easy to understand. Thanks!
@curtistravis508724 күн бұрын
I shoot prime. But not for speed. That draw cycle is like butter! And about the 1 bow maker that iv never heard of any major issues (granted the limited history) plus free strings and cables every 2 years!
@Aldocello128 күн бұрын
All i can think about is a her bow string catching the nose ring on a shot ....
@madman43200029 күн бұрын
At least you said the name correctly, better than most of the other reviewers. 😅 I have one too and it's definitely a nice bow.
@BallewBlade86Ай бұрын
I’m confused, my new 29.5 lift at these exact specs 29” draw 70lbs with a 480g arrow is only hitting 282 fps and that’s how fast your 500g is. I’m at 85% let off on my mods, wonder if these one were the 80%? I love this bow so far!
@straight6archery53Ай бұрын
Hmmm I wonder if it's just a difference in each chronograph? It could be that for sure. We did test this bow at 85% so it should be the same as yours! Glad your enjoying it! They are sweet bows
@jefferylorsung8846Ай бұрын
I wouldn't say it's recommended but I put and extra 1/2 turn on my carbon one. 74 lb draw 444 grain arrow and its 299-301 fps. Is the new version easier to stabilize with the extra 3" ata? I was worried about shooting a 30 at range but it does well way farther than I would shoot at game.
@toddshumaker27152 ай бұрын
I can't agree on the string angle at full draw comment. That's the only reason I went with the Mathews Lift 33. The Alpha X 33 string angle at my DL, 31", was not comfortable at all. I couldn't get comfortable with it unfortunately.
@colerichardson74352 ай бұрын
Keep making these videos, im trying to step up my game with my bow this year, im tired of other people working on my bows
@ericackerman69182 ай бұрын
Is clockwise right?
@straight6archery532 ай бұрын
Which part of the video are you referring to?
@True_flight7772 ай бұрын
Gr8 bow🏹🏆👑
@Aldocello13 ай бұрын
Lets do a sound test but have useless noise of my truck in the back-round ...
@arisdelis13 ай бұрын
I own a few Mathews bows and will ever sell them ...but 321 ft/sec for a 380grain arrow is SLOW...esp on a bow costing $2k ...no thanks ill keep my Monster XLR8
@1bobharvey3 ай бұрын
I'm not a big dude, I'm 5'8". But if your slender you can definitely fit 2 people in it since I normally keep my bow and pack in it next to me. Best part about this tent is when you tie it down good it doesnt flap at all. So when you hear something at night you know its something and not just your tent making noise.
@user-lx4yg6yv1n4 ай бұрын
Thanks for the video, the sign of a good teacher/instructor. is to keep it understandable to the average person some people like to talk over your head to make it sound like its magic. RTQ
@RF-cz4ln4 ай бұрын
Awesome video, just learned something new. Thank you for sharing your knowledge.👍🏻👍🏻👍🏻
@robcarr85054 ай бұрын
I'm about to buy a phase 4 but I'm going to have to start with accessories from my cheap diamond edge max for now and I'll add Mathews accessories here and there as I can afford it.
@chewball224 ай бұрын
Thanks for the video! I just bought the Kairos yesterday. Where was the arrow in relation to the Berger hole when you set it up?
@straight6archery534 ай бұрын
Thank you for watching! We always have the arrow running right through the middle of the Berger hole on most bows. It’s basically in the center of all geometry
@jons8585 ай бұрын
Is it neccessary to have the LCA limb lock kit to press the Mach 34?
@straight6archery535 ай бұрын
Definitely reccomend. They are slightly past parallel and you run the risk of that slipping out of a press if your not careful. Either that, or screw the press arms all the way in. Hope this helps! Have an awesome day!
@charlie87965 ай бұрын
If your left handed don’t waste your money unless you want a up side down right handed
@straight6archery535 ай бұрын
Honestly, we couldn’t agree more. They need to figure that out but I’m positive they will!
@charlie87965 ай бұрын
@@straight6archery53 Do you have true left handed hunting sights you can recommend?
@straight6archery535 ай бұрын
@@charlie8796 absolutely. We carry Black Gold, Spot Hogg, Option Archery, and our personal fav in the Landslyde from Axcel. All have amazing features and will out perform other sights on the market 🤘🏼🤘🏼
@disposable_hero27485 ай бұрын
My 70# Limbs are weighing at 69lbs and my bottom cam is hitting about 3/4 faster than my top. What string would I twist for that ? 😮 I’ve been in a tuning nightmare for my first now 😔
@disposable_hero27485 ай бұрын
It’s A VTM 34 with the HBX cams
@sarcazmo3 ай бұрын
Did you watch the video? His bottom cam was hitting first. His bow was 71lbs so he took twists out of the top cam.. Below lbage add twists to bottom
@disposable_hero27483 ай бұрын
@@sarcazmo yes I watched the video… i can still ask a question to make sure. And I fixed my cam timing. I bought a press/draw board, vise and just started working on my bows. Only been into archery for 8months or so. Asking questions is normal bro.
@sarcazmo3 ай бұрын
@@disposable_hero2748 right… but he answered the question in the video. Why ask a question that’s already been answered
@disposable_hero27483 ай бұрын
@@sarcazmoexcept my bow’sowner manual instructed me to twist different cable, so not I wasn’t the answer. Idk why ur so invested in a question I had a month ago that I’ve found the solution too already 😅
@mattguzman735 ай бұрын
ONNEX Clicker! Love that (my) release.
@jimmiekaelin48045 ай бұрын
Trash the football clip and use a friction knot instead. No tools, no hardware, no problem.
@wayneeden985 ай бұрын
My big loaded money question is, when is archery gonna run out of ideas to keep archery going
@larrydrake84575 ай бұрын
You just made this very clear to me, thank you nice video!!!
@straight6archery535 ай бұрын
AW Thank you so much! Glad to hear it helped! More to come as always and thank you for watching! - Casey
@user-kt2ot9yz4f5 ай бұрын
Good day Where or under what code can I order a 75-85% letoff stop?
@straight6archery535 ай бұрын
I'm positive we can order them for you if you need? Do you have a Prime dealer in your area? -Casey
@Doober5606 ай бұрын
Can you bolt a picatinny onto that bright sight ?
@straight6archery536 ай бұрын
You can with a little ingenuity hahaha We used one of the old RX-4/5 Pic rail mounts that were the 2 piece. The one piece bolted right through the riser which we used on the brite site leveler to do pic rails. If you can’t find one let us know! We have some extras we can mail you
@Zayzanater6 ай бұрын
Picked one up earlier today, I was super hyped. ( Quick note I use the rx7 ) First off, I couldn’t figure out what I was doing wrong because the entire stand kept pivoting, and I had the locking screw and couldn’t figure out where it went. Upon watching your video I figured out that the locking screw only works with the Rx8, since the Rx7 doesn’t have the hole for it. I was pretty disappointed since you can’t find ANYWHERE that the locking screw doesn't work the Rx7 and earlier models. Honestly considered taking it back, since without tightening it as hard as possible the entire stand will pivot, and even when doing that even in just the day I’ve owned it, I’d still find the stand coming loose and pivoting. On top of that, I just have the factory stubby bottom stabilizer so I can’t use the stand in a way that keeps the kam’s out of the dirt, without buying a bottom stabilizer. So all that considered, it’s pretty hard to justify the $140 price tag for any Rx7 owners. Please give me any tips to stop this stand from coming loose and pivoting.
@straight6archery536 ай бұрын
Man I’m sorry to hear that!!! I totally agree though, it’s frustrating with that design flaw. I guess not a flaw however it forces you into a new bow 😂 Without a locking washer on the backside of the mount I’m not sure how else it will work. If you bought it from us we’d love to exchange for store credit or a refund! Let us know if we can help you! Good luck!
@Zayzanater6 ай бұрын
@@straight6archery53 Thanks for actually replying! I didn’t buy it from you guys, but thanks.
@straight6archery536 ай бұрын
@@Zayzanater you got it! Thanks for watching!
@ricksears33306 ай бұрын
Great video. Appreciate the education
@straight6archery536 ай бұрын
Thank you!!! More to come in the future!
@MidwestBowAndArrow6 ай бұрын
why not setup the sight axis with the sight is bolted on the bow?
@straight6archery536 ай бұрын
You can do that for sure, but this is much more precise. You can always double check it when it’s mounted on the bow
@jamesraymond296 ай бұрын
How much do the go stix weigh?
@straight6archery536 ай бұрын
Just weighed one out of the package and it’s in between 5-6oz with the screws 🙌🏼 Super lightweight, you won’t even feel em
@jamesraymond296 ай бұрын
Awesome yea the ones I'm using now weigh 4 oz so 1.5 oz more won't be a big deal appreciate your time with that now I know what I'm getting for my birthday
@josephfolsom20306 ай бұрын
What sight are you using? And any specifics.
@straight6archery536 ай бұрын
That is the Axcel landslyde head with the Mathews bridgelock bar attachment in this video. It allows us to keep the sight closer to the riser for better balance! 💪🏼 The Axcel is our favorite dial sight by far, with spot hogg being a close second
@josephfolsom20306 ай бұрын
@@straight6archery53 Are you using 3 horizontal pins as well as the sliding adjustable dimmer for the pins?
@straight6archery536 ай бұрын
@@josephfolsom2030 that specific head was the 5 horizontal pin with the dial. We are typically using the bottom pin as our rover for our tape indicator! 👍🏼
@straight6archery536 ай бұрын
@@josephfolsom2030 and yes, we are using the shade over the pins during the mid day
@josephfolsom20306 ай бұрын
@@straight6archery53 I have been using the Spott Hogg Fast Eddie XL Triple stack on my Phase 4 29. It weighs right at 15oz. Shot the Lift 33 a few times this week and really like how it holds. My son had gifted my Phase 4 to me last July. Have the 33 Lift on order and want to keep it light and balanced. I’ll probably go with 3 horizontal pins. Did you order your Landslide with the Mathews Bridgelock bar or separately? I know they make one with the longer dovetail bar. I really like your setup. I’m only shooting 55 lbs due to a detached rotor cuff on my drawing arm. 29.5 draw length so I really don’t how far out I’ll be able to shoot without hitting the sight with my arrow at it longest setting. 436 grn. arrow
@user-gj6gq8om4s6 ай бұрын
Simple yet very informative. Thanks!
@straight6archery536 ай бұрын
Thank you so much! Really appreciate that
@bowdude336 ай бұрын
Would the tripod position work with a 10 inch stabilizer? I saw they recommend 6-8” how would the 10 inch affect the height off the ground ?
@straight6archery536 ай бұрын
Oh for sure it will work with a 10” stab 🙌🏼 It will just change the pitch if the bow which isn’t a big deal at all
@huntsimple95276 ай бұрын
I finally found a left handed 33 in stock and was able to shoot it a bit. I decided to pick it up, spend some time with it, and wanted to report out my real world findings. To be honest, I was very skeptical about this bow when I first saw the release of it. When I first inspected one in person, my skepticism grew. You can literally grab the cam and bend it around in all directions (of course with the bow at brace) as the limbs are so skinny they just flex like crazy. I was worried about that from a durability standpoint. I was also worried about the cams being very, very skeletonized. They seem like they would be easy to bend, etc. Those were some initial observations before I got to shoot one. I got to shoot one and my first reaction was 1) the draw cycle is very linear, just stiff 2) there is no valley (even at 85%) 3) the vibe/shock after the shot is more than the Phase 4 and 4) the riser length adds to stability significantly 5) something different in the grip where your thumb fits is improved. I shot it with both C and D draw length mods and landed on taking it home with the C mod. I bought the bow and took it home (we do our own set up and tuning at home)...... Set up was easy. With a center shot rest we had a perfect bullet hole with ZERO top hat changes or any other changes. The Match strings are an improvement over the Zebra, not sure how much of an improvement but they are better. They are thinner and they did settle very quickly and my peep locked in. So I just started shooting it for a few days. The bow has a very clean shot cycle, very clean release. With it all set up, the vibe/shock was mostly gone. I got used to the draw cycle being stiff. I never did like the lack of a valley. My style of shooting my hinge is to relax/elongate the palm of my hand and that style does not work well with a bow with no valley. As I shot it, I realized the C mod was making me feel a bit long. I was not stable at full draw and could feel being a bit overextended. My shop still had the D mods, so I switched to them and now I was too short, feeling scrunched up. When I am scrunched up, I have hand torque. For me, having the draw length perfect is a huge issue, as I finally found out how well I shoot when my draw length is spot on. It matters hugely! So, sadly, I am caught between a D and C on this new Mathews cam and not comfortable at either. Note on the previous Mathews cam the D mod worked well for me). Yes, could I twist strings and/or remove the grip and/or fiddle with D loop length or even my release neck length (different releases) - yes I could do all of that to try and get the Lift 33 to fit my draw length. Since I have other bows I shoot well, I did not want to put that level of effort into the Lift, so I sold it/traded it. As long as Mathews runs this newest cam with the 1/2" draw length limits, I am probably out of luck with Mathews. Conclusion, while I can't speak to the long term durability of the bow/cams, if your draw length fits one of the draw mods and if you are OK with no valley, this bow could be a great choice for you. Thank you.
@evanrindal63926 ай бұрын
I always wondered how that worked!
@straight6archery536 ай бұрын
Now you know brotha! Thank you so much for watching!
@jacobspath47936 ай бұрын
First video from these guys I've watched. Pretty good
@straight6archery536 ай бұрын
Thank you for watching! 🫱🏻🫲🏼🫱🏻🫲🏼
@keephammeringprospecting6 ай бұрын
Cheers legend, helped me a bunch 🤙
@brucescott98146 ай бұрын
You guys were saying about the new Pse Quiver, I was just wondering have you try the Nock on Checkmate quiver or would there be any chance of you reviewing both of the quivers...
@straight6archery536 ай бұрын
Thank you for the question! We have a bunch of the PSE quivers on the way, and in our opinion are the superior quiver of the two. A lot of thought went into the PSE quiver and accessories! Should see them in both stores soon!!!
@brucescott98146 ай бұрын
@@straight6archery53 Thankyou very much for the quick reply. By any chance could you do a review on the New Pse quiver when you get them, in I can't seem to find a review on them.
@user-tc8kx1cz7e6 ай бұрын
Would you chose the rx8 over the ultra or vice versa? I only tried them without any accessories. I’m sure you have tried them with all the bells and whistles. Thanks for your help.
@straight6archery536 ай бұрын
Thank you for the question! It depends on what your wanting to accomplish. I shot the ultra the last 2 years because of the string angle. I’m 29-3/4 draw and the ultra just fits me comfortably. For longer shots, the ultra is where it’s at but for tight places like blinds or tree stands I would choose the 30”
@user-tc8kx1cz7e6 ай бұрын
Thank you. Yeah I shot them both at the shop. The balance of the ultra is unmatched but like you said for hunting the shorter is definitely what I prefer.
@omm77637 ай бұрын
The lift 29.5 is one of the best bows I've tested and then purchased this year.
@straight6archery536 ай бұрын
That’s awesome to hear! We agree 🙌🏼😝
@drewolm7 ай бұрын
I ordered a Lift just because I think it looks too knarly not to. That said, from everything I've seen, this bow is slower than my Traverse. So are most of the new bows over the last 3 or 4 years.
@user-yf1kf2yk4i7 ай бұрын
Thanks!
@krantz107 ай бұрын
Rx 7 and 8 shit on the lift 😂
@RMC20217 ай бұрын
How long of a stabilizer do you need for the second position? i have the RX7 with the factory stubby stabilizer. I have the 1.0 version of the go stix and I love them but hate the cam on the ground. Mathews did a much better job on this but I love my Hoyt bow.
@straight6archery537 ай бұрын
Hey there! Thanks so much for watching! We recommend an 8" off that front platform for optimal use. A 10" will also work, but will also get in the way quite often with the Go-Stix
@RMC20217 ай бұрын
@@straight6archery53thanks for the reply. Will a 6” not work?
@straight6archery537 ай бұрын
@@RMC2021 the 6” will still work just fine, but won’t have as much cam clearance as the 8” bars will. If you want the most for clearance like the Mathews legs, we reccomend the 8” 🙌🏼🤘🏼🤘🏼
@douglasvaughn95307 ай бұрын
You got good taste brotha. Just got my Kairos yesterday and will be slinging RIP TKOs.
@tylerwatkins63197 ай бұрын
Were you using 80 or 85% let off?
@straight6archery537 ай бұрын
This is with the 85% LO mods! Feels excremely good
@user-yf1kf2yk4i7 ай бұрын
Nice job explaining the sight. You tipped me into buying one
@straight6archery537 ай бұрын
Thank you so much! Thank you for the kind words! - Casey
@wisdomveritas62817 ай бұрын
Braxton Hill is the LB that will shut down the rabbits.