On minute 6:21 when you click “computer chip” my TCM doesn’t show on the list I don’t know why

I dont have TCM Under configuration and programming

HI there, I saw your video on youtube about TCM programming . So i got a few ford fiesta tcm and mazda 3 tcm. How can I test if they are programmed properly and if they need any programming how can i do it. I can buy the hardware and softwares needed. My biggest concern is how do I diagnose/ program the tcm without fitting the tcm to the car. I saw a lot of videos on youtube where they plug the J-box to the car to diagnose/ program. I would be happy if you can help me out to .

Hi, I have not been able to find the Beta that gives access to the programming of the TCM. Do you know where I can find it? Any help would be really appreciated . Great video by the way, it's the only reason I decided to do this myself.

Could I use this to program a Ford fusion 2016?

When I was downloading the firmware there was error. How do I fix it?

Thank you ! I thought only IDS expansive deal was the only way to program a 2012 TCM module. This saves a lot of money and time. ids License too expansive.

Hello, How do you know what software version to choose when updating the TCM?

Do you have to use the beta software?

When I press download it says: Downloading AE8P-7244-AB: Not available under trial Extended License Downloading FV6P-73104-GE: Not available under trial Extended License

I have also vgate vlinker FS why there is no TCM programming in the programming tab? Can you help me with this??

Hi Drew, I have a right hand drive 2014 Mondeo powershift X Sport, would you know if the same process would apply. Many thanks

How can I get the reprogram my new tcm if I don’t have access to the old tcm anymore ? Any advices ? Thanks.

Got it done! Appreciate the video!

This is the best video. Thank you

Thank you very much for creating this video!!

Hi can I get the email of Forscan team? And hiw much will it cost to have a forscan license?

complete BS link is dead Forscan is BS proram wh sells copy a bad copy of ids and obdwiz with $10 simple reader that claim free software this sofwatware is FRAUD FORSCAN IS FAKE AND FRAUD MOVE ON TO ANOTHER OPTION SAVE YOUR TIME

Forscan doesnt have TCM access for this mdels , there is n separate module Forscan supprt claim it is added to 2.4 windows version but their support and forum membership is horrible invitation only etc. Basicly do not spent $200 on regualr obd reader mx+ or obdlnk etc plus forscan go ot local mechanic shop it is 20 minutes $100 Forscan sucks support is rude,

Any one knows if this is the same for a 2012 Ford Ecosport with the same automatic transmisión DPS6 power shift and the same TCM MODULE ?

@mgkl8465 1 second ago all others like settings dtc or vehicle menu TCM module is there but when click software chip icon no TCM ? Anyone know why?

weird 6:35 no tcm udate menu at forscan (paid version) ????

Great vdo , I will try with the 2 messed up cars that I have ! Thanks

I got 2013 FOCUS SE replaced the TCM still not show where the GEAR at so if i do Program that will help?

Hello. I have a program in version 2 3 55, but in programming I do not have the tcm option, do I need a newer version 2 4?

I can not download v.2.4

If I get a TCM from a salvage/junk yard do I have to do any type of flash/reset on the used TCM before/while replacing it, or could I just do all steps you do?

How can I find the hardware ID?

Do you have the link for forescan 2.4.6

Hi Does this procedure can be used for mondeo mk5? Thanks

there's a way to use for scan with a vgate feps flash EEPROM and if it is how you do it

Hello dear, good morning, I am from Argentina, I bought a remanufactured and programmable TCM kit for a ford focus, my auto technician cannot program a new VIN in the TCM so that it works in the ford focus. What can be the solution? Thanks in advance for your time

Hi Drew. Can Forscan 2.4.6 be downloaded from any other source than Forscan?

It appears that, if you don't have the Forscan software installed, you cannot obtain the "hardware id" and are therefore "stuck". My question please....Can one download this Forscan 2.4.6 beta for free and then get the free extended license for it?

Good morning everything is fine? If the old TCM is without communication, would it be possible with Forscan to program a used TCM?

Bro, it worked beautifully, with the 2.4.7 version

step 4 replace with another used one, it can be done, because when I download the old module it doesn't download the file and that's where your video ends saludos

Hello , Can you help share forscan v2.4.6 ? The links below is not dowloading

👍 👍 👍 👍 👍 👍 👍 👍 👍 👍 👍 👍

When i do this with the version online the TCM dont show up to program. and i do the adaptive learning steps work untill the 4th one and gets stuck 50-100 then 50-100 then 50-100. is there any way to get the version 2.4.7 or x or so to reprogram it? or is there a way to reprogram the TCM even tho its not showing in the chip section? i see it in other sections but no program. any help be great

Man you are my hero ordered the adapter and paid 12 for a year of software uploaded the firmware and followed the directions of the software and got it up running and saved a bunch of money in the process. Without this video I would of never thought to do it my self.

Do you think I could program a used fiesta tcm into a focus?

hi i need to unlock new fiesta limiter, is it possible by forscan?

So you have to text Forscan for the beta software to program the TCM?

why you skip the driver installation

thanks for your great video. i know your busy but im hoping you can answer a couple questions for me. 1. when i click the computer chip the TCM is not on the list at all, so i cant update anything. 2. i was able to run the adaptive learn program just fine to a point. When i get to (shift drum adaptive learning) its says ok, but the very next one (select gears) the program hangs up, the percentage bar will go to 100% then back to 50% over and over. after about an hour of it doing this, i just shut it down. do you think this is a transmission problem or tcm problem? the tcm is still under warranty but if i bring it to the dealer and its the transmission they will charge me 300 just for the diagnostics. i can get a transmission for 150 at the salvage yard, so i really dont want to waste $300. i would love your opinion, thx

I guess the better question is: Can I program the TCM doing all the learning steps for a 2012 Focus using FORscan 2.3.53 or does it have to be at least 2.4.X? Thanks for the help.

Hi. Can the programming of the TCM be done with FORscan version 2.3.53?

There’s a drive cycle also involved when performing the adaptive learning, it’s in the repair manual. NOTE: The following steps are for Drive cycle. NOTE: If a drive cycle is not completed, the customer may feel erratic shifts and driveability concerns. NOTE: To perform drive cycle, drive the vehicle on a level road surface. 1. Depress vehicle brake pedal (do not use parking brake). 2. Shift to Drive. 3. Wait 15 seconds. 4. Shift to Reverse. 5. Wait 2 seconds. 6. Repeat (1-5) ten (10) times. 7. Accelerate from a stop with light throttle to 15 mph (24 km/h). 8. Brake gently to a complete stop (allow at least 6 seconds). 9. Repeat steps (7-8) five (5) times in dealership parking lot or similar setting. 10. Accelerate from a stop with light throttle performing 1-2, 2-3, 3-4 shifts maintaining 1700-2000 rpm. 11. Accelerate to a speed between 50 mph (80 km/h) and 65 mph (104 km/h), achieve 6th gear, keep throttle steady with engine below 3000 rpm for a minimum of two (2) minutes. 12. Repeat step 11 two (2) times. 13. Test drive the vehicle.