Hope you get it fixed and up and running soon..what lake is that please?
@noidontthinksolol23 күн бұрын
Delete the pump and use premix. I hate relying on oil injection systems myself
@tort197423 күн бұрын
Little background, yes the engine is flooded with oil, this video is only up so I can post a link in another forum, boat has a new OEM vro installed, stalls out at about 5000 rpm, I find it hard to believe that new vro is defective but starting to lean that way, everything fuel related has been replaced at this point less than rebuilding the carbs which have no visible fuel leaks
@eli1west23 күн бұрын
pretty impressive how you managed to actual somewhat mess up this motor 😭😭 bad plug
@tort197423 күн бұрын
@eli1west your insightful comment is equally as impressive
@DCFloridasport23 күн бұрын
sounds like a plug fouled, check your oil ratio, those motors were indestructable otherwise🙂
@sm597623 күн бұрын
Failing fuel pump. At least that was the issue when mine did that.
@sstocker3124 күн бұрын
fouled plugs due to to much oil in the gas, or oil injection pumping too much.....that's my guess
@DCFloridasport23 күн бұрын
agreed... its smoking a bit heavy for a warmed up motor so that says overoiling fouling the plugs.
@philimac1278 Жыл бұрын
TY KA
@iselili22 жыл бұрын
This music and fixing anything on the boat is what nightmares are made of!! Thank God for mute
@jcsquad5874 жыл бұрын
Thanks for the upload, very helpful!
@lunadog77844 жыл бұрын
Thank you for the video. I’m about to try this with my boat and your video made me much more confident that I can do this myself. Thanks again.
@consumeradvocatematt5 жыл бұрын
Thank god for mute. That music made me schizophrenic.
@Mcard3336 жыл бұрын
Where does that line on the back go? The rubber one you pulled off by hand.
@jesuscarranza7536 жыл бұрын
After the carburetor rebuilt did the boat idle good like should? having the same problem thinking of doing the same thing as you
@joecaputo67186 жыл бұрын
The fuel line that's on the back where does that go to on the fuel pump
@Fireship17 жыл бұрын
I just rebuilt one. It's based on the two barrel GM rockchester carbs. Very easy rebuild. Not too many parts in there. Some updated parts increase reliability. There's a two piece needle valve at the inlet and an adjustable accelerator pump shaft as well as some different parts in the Venturi assembly to deal with the bog downs these carburetors sometimes experience. The kit is about 40 bux. Can be rebuilt on your kitchen table with a few ordinary hand tools.
@kimjensen34676 жыл бұрын
Fireship1 thanks for info. Where did you get the rebuild kit with the upgraded parts?
@Fireship16 жыл бұрын
Kim Jensen I bought my kit on eBay. But you can find them on amazon or anyplace you order boat parts from like marineengine.com. Also any carburetor shop should also be able to get you one as well as any MerCruiser dealer.
@kimjensen34676 жыл бұрын
Thanks again. I bought mine at Repower Marine UK. I live in Denmark, so it's a godsend to have a good ebay dealer within EU. It's such a pain in the butt to import things from US, due to customs delays and fees
@darielcollazo56694 жыл бұрын
I’m having issue with my boat. Takes 3 or 4 trying to start. And last week it did something weird loses power . Feels like it was running out of fuel or dirty fuel. I’m thinking the carburetor. What you think?
@Fireship14 жыл бұрын
Dariel Collazo I’d definitely take the carb apart and perform a cleaning and rebuild. If it’s been several years, I would say your due for it. It’s cheap and easy and will solve many weird running issues. If you haven’t changed fuel filter(s) and spark plugs it would be a good time to do the regular maintenance too. If you don’t already have one, a water separating fuel filter is a great investment.
@jfmc25817 жыл бұрын
What is that filter thing where the fuel line goes? Exactly what carborator is this?
@konrada77167 жыл бұрын
Mercruiser carburetor, and it's an in line fuel filter to keep any fine debris from getting into the carburetor