SciTyeTech

Пікірлер

@multitechservicepoint4917 Күн бұрын

Can I use isopropyl to mixed carbon

@Muonium1 3 күн бұрын

You put the diffraction grating way too close to the entrance slit. In its current location it offers little if any benefit over just holding the grating up to objects without the tube at all. Remove it and place it at the eyepiece, then adjust the slit at the other end to a narrow aperture to obtain hundreds of times more spectral resolution than seen here. Make sure that the grating lines are parallel to the slit when mounting it at the eyepiece.

@tomlynn1000 4 күн бұрын

The bass beat in the background is too distracting to continue with this video.

@Charleshowes23 5 күн бұрын

The listings for the GoPro Hero 2 lenses say they won’t fit the 3+? Ragecam says I need to order the one they make. Are they only saying that because the IR filter hasn’t been removed??

@study-cc8di 5 күн бұрын

diameter of the metals bars...

@mr.e.484 12 күн бұрын

Very cool concept. Great work. I will be using this design from now on. Thanks

@SciTyeTech 9 күн бұрын

Glad you like it! And you're welcome!

@zedvar3806 12 күн бұрын

Are you making this video in someone else's house? What's with the whispering?🤪

@LeeWhalan-bi8kc 15 күн бұрын

Sorry what What happened I fell asleep Night nights

@Mendokusai931 17 күн бұрын

Do you have a channel about building Genshin Impact characters? Your voice is similar to the Raiden Impact video, "yeah I'm a simp too."

@darthfishimouse 17 күн бұрын

You’ve inspired me

@SciTyeTech 14 күн бұрын

Really!? That's cool!

@truthspeaker6689 17 күн бұрын

Cardboard? Unless I want to burn my house down, no thanks.

@narendra848 17 күн бұрын

14 gauge is too thin for this project, you should go for 10 gauge.... :P

@shmoochicago 18 күн бұрын

The algo brought me here. Subscribed

@JackiePena1970 18 күн бұрын

What is the model number? I want to make sure I get the right one.

@alphaindustries5775 20 күн бұрын

Film during the day when your parents aren’t sleeping

@mamaslostsoul 21 күн бұрын

Beautiful. This is the first place where the entire circuit is made simple and clean. Thanks for this great share.

@nickthesail0r 21 күн бұрын

I think is easier to take some pencils and take the graphite from them than touch the chemicals from the battery

@Adityadwivedi377 25 күн бұрын

Sir help me i have an high voltage module which has maximum voltage rating 7 v and only nine volt battery what should i do

@trystonkincannon8320 27 күн бұрын

Worst video I seen, I came here to figure out how to remove the board on the tube, but once I seen how he took off the anode, I come to realize this man knows nothing about safty or CRT-TV

@ambermartin7535 Ай бұрын

Very interesting how the feather is lined with microscopic barbs that are designed to hold on to each other for secure flight. I love birds and learning about them.

@SciTyeTech 14 күн бұрын

I agree. It is very interesting. It is almost like a zipper.

@JackiePena1970 Ай бұрын

Is this model a 5052STR?

@Cheburashka_420 Ай бұрын

I just found out who you sound like..... Kip.... Napoleon dynamite's brother

@alfredritcher Ай бұрын

Gee i always thought it was a little man with a flashlight

@Alanqbi Ай бұрын

طيب لو نستخدم 100ليد IR مع مقاومه متغيرة لرفع الاضاءه اكثر

@JackiePena1970 Ай бұрын

Do you need an IR light attachment to film in darkness?

@SciTyeTech Ай бұрын

Yes you do.

@JackiePena1970 Ай бұрын

@@SciTyeTech Thanks

@cisium1184 Ай бұрын

Why are you talking like that?

@waihan6772 Ай бұрын

Hi, isn't LM386 output max at 1 watt? How are you connecting it to a 15W speaker? Thank you!

@Technical_BD-69 Ай бұрын

Swiss Army knife 🧐

@powerdollkirby Ай бұрын

banger intro

@SciTyeTech Ай бұрын

Thanks!

@robertmarsh2656 Ай бұрын

Why are you whispering?

@Cheburashka_420 Ай бұрын

It's crazy that 12 thousand people watched this but only 66 liked it. I appreciate the video. I know nothing of electronics but am learning now so I can create my own adjustable power supply. It's hard going but it's going haha.

@SciTyeTech Ай бұрын

I appreciate that!

@back4onemore Ай бұрын

Would a 19.5 volt power cord be ok for the 19 volt plug doing it this way as long as the amp is above it?

@SciTyeTech Ай бұрын

Probably, but the voltage should be the same.

@beatlesnut007 Ай бұрын

Easy radio to repair, almost a snap together, destroyed.

@dangoldenberg6781 Ай бұрын

Cool

@SciTyeTech Ай бұрын

Thanks!

@kermittorres8665 Ай бұрын

Looks like the tape won that one 😅

@subhankarpal8699 Ай бұрын

Very cool experiment 😊

@SciTyeTech Ай бұрын

Thanks!

@fritz9830 Ай бұрын

Dont lick gour fingers

@SprinterEE100 Ай бұрын

I have an old LG CRT TV and with a busted FBT. Can I replaced the busted FBT with a different FBT model if I can't find the exact model to replace the busted one? Thanks in advance.

@SciTyeTech Ай бұрын

You could try, but it may not work because of the voltage may not be the same. It could overheat or not provide the right amount of voltage.

@mcdradus Ай бұрын

dude you just wasted a good radio

@wegsteryt5524 Ай бұрын

Why does everyone use the long dildo philips bit

@mhafizhnurian408 Ай бұрын

Love all your teardown vids!

@SciTyeTech Ай бұрын

Thanks!

@user-kc4jr7sz3v Ай бұрын

what votage it is？

@SciTyeTech Ай бұрын

10kv.

@boommaster9672 Ай бұрын

you should try to make asmr xd

@SciTyeTech Ай бұрын

I think I may.

@IdeationGeek Ай бұрын

So, 33% Bi +16% Sn => BiSnIn, But 32.5% Bi + 16.5% Sn => Field's Metal ?

@combycat Ай бұрын

oh yeah! those things have flybacks in them!

@SciTyeTech Ай бұрын

Yes.

@Uriel_The_Kitty888 Ай бұрын

I had the camera

@SciTyeTech Ай бұрын

That's Cool!

@Uriel_The_Kitty888 Ай бұрын

But I destroy it and took the capacitor

@gonebloodypsycho8759 Ай бұрын

A flux capacitor? Nice, how many jiggawats?

@kamalfarai15 Ай бұрын

when using microscope like you do on video is for reparing tiny pcs but if you want make video about components under microscope, you need the knowledge about components to autopsy them exposed them from the cover and explain, not just zoom in and viewed it bigger

@ElektrischInkorrekt Ай бұрын

Also it would be cool to Zoom in a little bit more. That wasn't even x100-Zoom. Maybe start with EPROMs as there the die itself is visible through a small window or try to decap metal cap transistors. x1000 or x5000 would eg be cool. And then also as a big picture so you can see the device as a whole but also the tiny Details.

@kamalfarai15 Ай бұрын

@@ElektrischInkorrekt that what i want to say,

@ElektrischInkorrekt Ай бұрын

@@kamalfarai15 but to be honest: trying to reverseengineer a die is not that easy. I tried to do it, but i wasn't yet able to fully understand the concept of that.

@kamalfarai15 Ай бұрын

@@ElektrischInkorrekt to know the concept you should be do some research about how the components look like on the silicon wafer, and to know more you should research how can calculate inductance and resistance and capacitance by his size form, that is the high level, for example to make capacitor on silicon wafer is just two traces close together by particular space that determin his capacitance value, is not something hard, robert are make a video with someone talk with it about how people can make their own chips components, is a video that its reach fully with informations about this topic

@ElektrischInkorrekt Ай бұрын

@@kamalfarai15 yes, I already stumbled across that altium guy, he's eg pretty good at HF-Designs. I was talking about the 'real Reverse Engineering - decapping, etching, distinguishing the n-dotted from the p-dotted silicon, and then deciding, which parts are eg. a fet, a Pnp-Transistor, etc. Siliconzoo has a great Manual in how to do that.

@KROKODYLCZ Ай бұрын

Thanks for the great video. And the level and style of the voice is great. A nice change from the screaming competition on YT.

@SciTyeTech Ай бұрын

Thanks! Glad you liked it!

@johnnycovenant2286 Ай бұрын

I've definitely said that exact same thing to myself

Ең жақсы KZfaq

Пікірлер