@@donfrussell If the rls jaws from Milwaukee or Rigid fit on the Milwaukee m18 pro press, then yes they will fit on the Vevor pro press as well.
@bytimexok7 күн бұрын
Milwaukee mega press jaws is use for Viega MegaPress fittings ?
@TOOL_TECHNICAL10 күн бұрын
How long until vevor wants you to send it in for calibration? I assume there's certain amount of times it will actuate before needing to be checked the right KNs of force range
@levi501610 күн бұрын
@@TOOL_TECHNICAL after 30,000 crimps. It shows on the Vevor pro press how many times it’s been used. I don’t know if Vevor provides that service though.
@Николайсантехник.1813 күн бұрын
Привет, это твой личный инструмент? Если да, то ты крут!
@michaeldavid304118 күн бұрын
Hey bud I was wondering if my vevor press would work with those rigid jaws. Can you please tell me what rigid compact set I should get
@fasteddie538820 күн бұрын
Hows this this tool working out for you so far? I just ordered one for DIY projects and am a little nervous.
@levi501620 күн бұрын
@@fasteddie5388 it’s working out perfect! For DIY you made the right choice but even if you bought them to use for work like me you would still have made the right choice.
@fasteddie538819 күн бұрын
@@levi5016 That's awesome. Thanks for the reply.
@christopherbeaulieu494222 күн бұрын
I read it will also take makita batteries. Don't know if it's true bit would be nice to know
@levi501622 күн бұрын
@@christopherbeaulieu4942 yes that is correct!
@pmtips448222 күн бұрын
Very nice piece of equipment, thanks for sharing!
@TrueSniper16922 күн бұрын
Nice i just bought the same propress im a contractor but i do alot of plumbing
@javierbramasco402024 күн бұрын
Let the work begin!
@levi501623 күн бұрын
@@javierbramasco4020 let’s get it!
@javierbramasco402024 күн бұрын
No leaks 🎉 awesome 👏 😎
@taco698928 күн бұрын
BAM!
@claudiolaravarela1988Ай бұрын
I have the tools and works great ,it’s heavy but does the work for best price ,,I think is fine to beginners,,once you make more money you can better brands
@levi5016Ай бұрын
Exactly!
@EluderRacingАй бұрын
Bam!!
@sleepingnoise2992Ай бұрын
Will this work for hvac?
@levi5016Ай бұрын
I haven’t done any research on the hvac side but I know that if any jaws are compatible with the Milwaukee m18 then you can definitely use those jaws on the Vevor pro press. Does that help?
@user-dq3jk9py4qАй бұрын
I also heard you can use Makita batteries on the vevor propress
@levi5016Ай бұрын
Yes that is true.
@FixitAllАй бұрын
So big and heavy. Not for one hand work. No, not good.
@levi5016Ай бұрын
Yes it is heavy but not unbearable. I use this pro press all the time and I highly recommend it to anyone who doesn’t want to pay $2,500 or $3,000 for one. I bought it for $900 which includes the jaws from 1/2inch to 2inch so yes it is good!
@FixitAllАй бұрын
@@levi5016 thanks!
@MrPONCHO467Ай бұрын
Amen
@MrPONCHO467Ай бұрын
Yo those lyrics are deep!!!!
@joshmazzucco8449Ай бұрын
Looks like crap
@carmenroa2181Ай бұрын
Hope you don't have to contact their customer service chat only. No local address, no phone number. Their website is for shopping only. Company is based in Shanghai, China, they ship from the US. Purchased a KITCHEN RACK. No order confirmation. No invoice. Missing pieces. To obtain the Missing items I would gave take pictures of ALL items received even the booklet. Check out their reviews and ratings. Buyer be ware.
@dmir2Ай бұрын
Why not use a mpt hose bibb and save a pipe joint?
@OOPS4U2CАй бұрын
Gooooo Levi!!!
@rafdel1252 ай бұрын
what's the update on that vevor pro press it look a bit to long
@zohebthayer2 ай бұрын
Does vevor make jaws
@levi50162 ай бұрын
Good question. I don’t know if they make the jaws but I do know that they do not sell them separately.
@user-wj6rj6yj1gАй бұрын
No, they do not. But it is cheaper to buy this entire kit than just the jaws from Ridgid or Milwaukee.
@MoneyMarcMes2 ай бұрын
Are the Milwaukee megapress jaws made in the USA?
@levi50162 ай бұрын
Yes
@CombatePractico2 ай бұрын
Thank you so much
@levi50162 ай бұрын
You’re welcome!
@HolyElkGaming2 ай бұрын
This is cool for the price of the tool. I do have a vevor powered sander, but i wouldnt consider it reliable to use professionally over a quality tool. Give us an update if you have any issues or leaking fittings. Thanks for the video.
@wind5250Ай бұрын
These fittings have been around since the late 80's in water , hvac and more. The first tools were hand operated , then corded , most of the failures have nothing to do with tools but bad prep. The Vevor tool is not as high quality as the m12 or others but it's way better than the older tools that did the job before. If a failure happens from using it 99.9% chance it's user error.
@hellboy07762 ай бұрын
Hi what kind of camera equipment are you using?
@levi50162 ай бұрын
It’s the Vevor sewer camera. It’s 165 ft and comes with a locator and sd card so you can record.
@MrPONCHO4672 ай бұрын
Awesome rap for Jesus, praise God.
@MrPONCHO4672 ай бұрын
👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾
@MrPONCHO4672 ай бұрын
Are you self employed, curious as to how your van is set up. I'm looking to break out on my own
@levi5016Ай бұрын
I just saw this comment, yes I am self employed. The van came with a shelf already from the last owner and i put all my 10 foot pipes on there. I’m able to put my tools and snake under it too. As you see in the video I have Milwaukee packout boxes and I recently put in a gorlitz hydrojet in there and I still have a lot of room. It’s a Chevy express extended version. I eventually want a van where i can stand without crouching down but as for now this van is perfect.
@RGB81-vr2se2 ай бұрын
So what happen with the leaks ? is there any ?
@levi50162 ай бұрын
After recording this video I did check for leaks and there was none.
@ishkabibble-oj1oi2 ай бұрын
I thought the jaws had an octagon shaped hole in them ? Are these for crimping pex rings ?
@levi50162 ай бұрын
The jaws in the video are not for pex rings but you can buy pex jaws from a different brand who sells them and put them on there.
@user-wj6rj6yj1gАй бұрын
The Milwaukee jaws in the video are for pressing black iron pipe and galvanized pipe.
@ishkabibble-oj1oiАй бұрын
@@user-wj6rj6yj1g Oh..thanks !
@dustina62612 ай бұрын
Would love to know and see if the rls/zoom lock hvacr jaws work in this. I would buy it tomorrow if they do
@davonlyons7802 ай бұрын
Me2
@user-wj6rj6yj1gАй бұрын
Anything that fits the full size Milwaukee tool will fit this.
@davidkuest62243 ай бұрын
You are clearly in an area that does not freeze...
@levi50163 ай бұрын
In the good old sunny state of California! LA to be exact.
@Ffoo_ffighter3 ай бұрын
Another banger. I wonder if the angled Ridgid C1 jaws work on this.
@levi50163 ай бұрын
That is a great question. I believe they do but I’m entirely sure. I’m definitely going to buy them but in the future.
@user-wj6rj6yj1gАй бұрын
Yes, the ridgid c1/v1 kit works with this. Make sure you use the v1 for this full size tool and the c1 for the compact m12 tool.
@mgtazco3 ай бұрын
Hi can you please show the parts and fitting you use for hydro jetting set up ? Thanks!
@levi50163 ай бұрын
Limited-time deal: WEST BAY 150FT Sewer Jetter Kit for Pressure Washer, 5800PSI Drain Cleaner Hose 1/4 Inch NPT, Corner, Rotating and Button Nose Sewer Jetting Nozzle Waterproof Tape Pearl Corsage Pin with 2Pcs Spanner a.co/d/0es3HIE
@levi50163 ай бұрын
I bought this kit on Amazon but the steel braided hose that you see in the video I bought separately at a hydrojet shop. The hose was the most expensive part.
@obakpo883 ай бұрын
thanks for this info. I heard after a certain time, you need to calibrate the tool, what's that about?
@levi50163 ай бұрын
After 30,000 crimps then you have to get it calibrated but to be honest I haven’t seen anything on Vevor saying that they offer that service.
@user-wj6rj6yj1gАй бұрын
You have to calibrate all press tools of all brands, some advertise 30k presses some 100k.
@obakpo88Ай бұрын
@@user-wj6rj6yj1g what's the process? Send back to manufacturer?
@user-wj6rj6yj1gАй бұрын
@@obakpo88 Yes, but not this one. They offer replacements if broken within a year.
@Ffoo_ffighter3 ай бұрын
looks heavy
@levi50163 ай бұрын
It’s Heavier than the Milwaukee m18.
@user-wj6rj6yj1gАй бұрын
It is heavy, but it’s also 1/4 of the price of Milwaukee.
@swagglifee3 ай бұрын
Mind doing a video with the same setup but taking the orings out of the fittings. Curios how well the pressing heads are made. Higher end kits have videos online of pipes still sealing without rings
@swagglifee3 ай бұрын
Yo yo
@candanaltuner48393 ай бұрын
Does the head rotate
@levi50163 ай бұрын
No the head does not rotate
@user-wj6rj6yj1gАй бұрын
It rotates on the pistol type model of this same tool. Also the motor on the pistol style is brushless.
@swagglifee3 ай бұрын
Thank u sir been waiting for input on this one
@levi50163 ай бұрын
I did as much research as I could before getting one and all I can say is that I made the right choice.
@Ffoo_ffighter3 ай бұрын
@@levi5016 Yeah, pro press tools are way too much money. Seems like there is no way to recalibrate this after the 10k or 30k presses. Not sure which is correct. But after that much, I'm guessing you got your moneys worth. 1/2 to 1/3 the price of RIDGID is worth.
@armurra3 ай бұрын
The one thing you don't want to hear while around this tool is "TITTY TWISTER!"
@mgtowski3953 ай бұрын
Twist-Off
@vladimus97492 ай бұрын
Twist and shout!
@juantovar65253 ай бұрын
Are they going to make a larger model? Looks pretty light.😂
@levi50163 ай бұрын
I know right 😂
@rickysandoval21663 ай бұрын
That's the 60 pounder. Website said there coming out with the 120. For gym use after or during work
@mgtowski3953 ай бұрын
😁
@eddyhmmk12 ай бұрын
Does up to 2” so…justifiable
@dustinkrebs82294 ай бұрын
Leak test soon?
@commandohazelnuts4 ай бұрын
BAM!
@NeighborhoodDada4 ай бұрын
Does the camera come with the screen?
@levi50164 ай бұрын
Yes, the camera comes with a screen and a locator.
@NeighborhoodDada4 ай бұрын
Are the dies in ID or OD? I do refrigeration so we use OD on our ACR tubing. Been eyeballing this for a while. Any chance you can do a press and put some water pressure on them? I have an old rigid press that’s big and heavy.
@darkosgarage4 ай бұрын
on their website it says its also meant for pex and stainless steel tubing, so its for ID copper tubing. I do not think there is any specific press tools made for ACR, Milwaukee does sell ACR tube adapters for their propress though.
@levi50164 ай бұрын
Yes I will put up a video soon with a leak test.
@NoflectioN3 ай бұрын
Vevor has said that the jaws from ridgid and milwaukee will work in their gun. Can you confirm that ridg. Or Mil. Megapress jaws (for gas line) fit vevors gun and work? Apparently there is enough tonnage there
@levi50163 ай бұрын
@@NoflectioN I read that too, I will eventually buy the Milwaukee mega press jaws.
@kylekober25925 күн бұрын
It doesn't matter 1/2" ID is 5/8 OD so for 5/8 OD you would use a 1/2 jaw
@soooof22123 жыл бұрын
Dont have any problem with religious people but what I do have a problem with is one religious person saying another religion is fake. It may be in your eyes but it's the same for them. For me it's even different because it's all fake in my eyes. But I dont tell you the thing you so desperately believe in is fake do I? It's common knowledge to respect all people and what they believe.
@levi50163 жыл бұрын
The bible clearly states that there is only one true living God and that there is no other. In the book of Isaiah God says that He will not give His glory to another nor His praise to carved images. Jesus also commands that I preach the gospel. If I truly believe what the bible says than what I'm doing is practicing my belief by declaring His word.