Hello, I want to take a temperature reading on the S7-1200 device with just a sensor without an HMI screen, keep a data log and transfer it to Excel from the S7-1200 plc default interface. I will communicate with the PLC, log in from the internet interface, and get the log file and transfer it to Excel. Can you help?
@plcgoodsКүн бұрын
You maybe able to use OPC interface to do your project.
@halitcelalyapar3690Күн бұрын
@@plcgoods How can I do this?
@halitcelalyapar3690Күн бұрын
@@plcgoods Can you send a sample work?
@KoDElec3 күн бұрын
Hi, thank you for good trainning please what about Multikey that you rename atfer the simulation? please let me know
@plcgoodsКүн бұрын
You just need to rename Multikey file. I do not have more information about this file.
@sharons60136 күн бұрын
When I check this circuit ,output 4 coil not energizing.IN1 and IN5 energizing. what could be the problem ?
@plcgoodsКүн бұрын
Please check out the video more carefully! Answer to you question is given during the video.💚💚
@MUHAMADIRFANAD-DARISBINMOHDYAZ12 күн бұрын
does this tutorials set are arranged acsordingly to be learn step by step
@plcgoods9 күн бұрын
Yes!👍👍
@MUHAMADIRFANAD-DARISBINMOHDYAZ12 күн бұрын
may iknow
@plcgoods9 күн бұрын
Yes!💚💚
@MUHAMADIRFANAD-DARISBINMOHDYAZ12 күн бұрын
sirr
@plcgoods9 күн бұрын
Yes!💚💚
@w1zzard41813 күн бұрын
Hello sir, i have the same PLC and the same configuration as you, but it seems that the delay between Factory I/O and PLC is very noticeable (1-2 seconds). How can i solve this problem? I have tried using the Rs-485 COM port and it's the same.
@plcgoodsКүн бұрын
Since you are using OPC server, then the delay is natural! It was mentioned during the video as well.
@w1zzard418Күн бұрын
@plcgoods Thanks for your reply. I solved the problem by setting modbus RTU instead of ASCII. I have increased the baud rate to 115200 and I have set the scan time to minimum (10 ms instead of 100 ms). Now I barely notice the delay.
@ubuntux2213 күн бұрын
How can you add the analog outputs address to the factory io s7 1200 template? i only get analog inputs addresses
@plcgoodsКүн бұрын
You may find answer to your question by watch these two videos: kzfaq.info/get/bejne/mN1phayprZ_XlJ8.html kzfaq.info/get/bejne/oNOKephiybyzon0.html
@iannsanchez924014 күн бұрын
In which video did you make the tank project with function block?
@plcgoods14 күн бұрын
Here is the preview course related to TIA portal: Siemens S7-1200 & TIA PORTAL - course preview check it out.
@mayurachamod15 күн бұрын
Please do more codesys
@plcgoods14 күн бұрын
Please check playlist related to plcgoods CODESYS such as this one: "Tutorial on CODESYS | Configuration, Simulation & editing a ladder logic program example PLC"
@mohammad.saiahysaiahy756718 күн бұрын
Nice
@plcgoods16 күн бұрын
Thanks💚💚
@learning950319 күн бұрын
Hi , are you Canada?
@plcgoods18 күн бұрын
No. thanks for checking out the video!👍👍
@alinoori582529 күн бұрын
thanks for your help
@plcgoods23 күн бұрын
You are welcome👍👍
@lilllianLIАй бұрын
I sale siemens PLC, it is original and new. S7-1200 is made in China, the price is very competive. pls feel free with me.
@veoteveo1Ай бұрын
thank you very helpful i would like to see a clean in place program with temperature setpoints, digital IO and IO link inputs and outputs
@plcgoodsАй бұрын
Thanks for your comment👍👍
@abdelbaqibelibel9459Ай бұрын
hello sir i have a question you make 5 as the different to turn off the output but when the water level goes higher then 255 the output didnt turned off even when it reached 300
@plcgoods23 күн бұрын
Hi there, please explain your question in details and determine the exact time of video that you have a problem with that. Pay attention, my program doesn't control valves automatically (based on the alarm conditions). I use 2 potentiometers to turn on/off valves manually.💚💚
@biswajitadhikari4363Ай бұрын
THANK YOU
@plcgoodsАй бұрын
You welcome!👍👍
@geraldsingh4037Ай бұрын
Great informative lesson.❤
@plcgoodsАй бұрын
Glad it was helpful!💚💚
@JoaoHenriquedaSilvaGamaАй бұрын
Thanks.
@plcgoodsАй бұрын
Glad it was helpful!💚💚 welcome
@geraldsingh4037Ай бұрын
❤
@plcgoodsАй бұрын
Thanks💚💚
@ranjithkumar-pq5jcАй бұрын
@plcgoods, When you do not know the IP address of a controller how do you connect to it.
@plcgoodsАй бұрын
Hi there, Each device has a MAC address. you can use MAC address to make connection with PLC and define its IP address. After that you can connect via the IP address.💚💚
@thusharawickramasinghe5965Ай бұрын
Good explanation. thanks
@plcgoodsАй бұрын
You are welcome👍👍
@fiifinenyi2156Ай бұрын
please can you make a video on how to interface the s7-1200 with a delta vfd using modbus rtu
@plcgoodsАй бұрын
Right now, I do not have any plans to create such a video, but I appreciate you checking out my content.👍👍
@HALALSTOCKS_786Ай бұрын
Awesome 👍 a
@plcgoodsАй бұрын
Thank you! Cheers!👍👍
@livealittle2352Ай бұрын
hey I cant find a device to select after scanning Ive done all the previous steps before that thank you
@plcgoodsАй бұрын
Hey are you using the same software?👍👍
@user-gs8pi2ui7j2 ай бұрын
👍👍👍👍
@plcgoods2 ай бұрын
Thanks for your comments!👍👍
@user-gs8pi2ui7j2 ай бұрын
👍
@plcgoods2 ай бұрын
Thanks for your comments!👍👍
@user-gs8pi2ui7j2 ай бұрын
👍
@plcgoods2 ай бұрын
Thanks for your comments!👍👍
@johannssonmason51002 ай бұрын
Really your explenation of this topic is actually so clearly and amazing
@plcgoods2 ай бұрын
Thanks for your comments!👍👍
@AlejandroEnriqueHerreraHernánd2 ай бұрын
Thanks for sharing
@plcgoods2 ай бұрын
Thanks for watching!👍👍
@persialearn99362 ай бұрын
great 🙏🙏
@plcgoods2 ай бұрын
Oh, thanks!
@liaqatali-ht3it2 ай бұрын
Good lecture .surprise viewers are less
@plcgoods2 ай бұрын
Thanks for liking👍👍
@proshantodas72112 ай бұрын
good job
@plcgoods2 ай бұрын
Thank you! Cheers!👍👍
@giorgijimsheladze17392 ай бұрын
a month has passed and this group has not fulfilled my order
@plcgoods2 ай бұрын
Sorry to here that, did you purchase your item from site? If so, I will investigate the issue, and take care of you
@otabektillavayev33092 ай бұрын
Very usefull
@plcgoods2 ай бұрын
Glad to hear that👍👍
@otabektillavayev33092 ай бұрын
Thanks you lesson very understand
@plcgoods2 ай бұрын
Glad it was helpful!👍👍
@otabektillavayev33092 ай бұрын
Thanks million
@plcgoods2 ай бұрын
Glad you fond the content useful!💚💚
@ameerhussien69782 ай бұрын
In manual mode how the value of the valve return to zero after release the button?
@plcgoods2 ай бұрын
Hi there, when I click on Filling or Discharging buttons on the HMI screen, PLC sends number 27648 to related analog output. When I release them, PLC sends 0 to the related analog output. The logic which turns off valves inside the Manual function is not displayed during the video. Instead of that, you can see the logic that turns off the discharging valve inside the Auto Function. Note that, the Manual logic of the discharging valve is the same as its Auto logic.
@user-jc3qk9xu1f2 ай бұрын
very helpful
@plcgoods2 ай бұрын
Glad to hear that👍👍
@meetvyas72632 ай бұрын
best of the best tutorial. keep going on
@plcgoods2 ай бұрын
Glad you liked the content!👍👍
@HM-zv9uo2 ай бұрын
Thanks for sharing useful information.I need advise related to 1756 ENBT Ethernet card communication. Usually We communicate with Allen Bradley PLC and(RS logix 5000,RS links ) via Control net module.We use also ethernet module for remote monitoring. "Network" light of Ethernet module is flashing green instead of steady. IP address is Ok and RS links see Ethernet module on rack.But when we check Module Properties from RS Logix 5000 it showed "Internal state : unconnected." I checked this module in other PLC rack and worked fine.But in own rack is not working I check new Ethernet module in the same slot but the same problem.Even i put to other slot no any good result.Could you please give me advise
@plcgoods2 ай бұрын
Please check internet to find answer for your question, I am not familiar with the device you mentioned in your question.👍👍
@tiagomarcilio12 ай бұрын
Wonderful channel. Thank you sir. In no time i will enrolled in Delta course.
@plcgoods2 ай бұрын
All the best💚💚
@vimbaitside51353 ай бұрын
its amazing
@plcgoods3 ай бұрын
Glad you found the content useful for you!💚💚
@oliverellwood28643 ай бұрын
Great video, thank you for making this content
@plcgoods3 ай бұрын
You 🙏
@asmaalwardi3 ай бұрын
perfect❤ thanks alot
@plcgoods3 ай бұрын
You're welcome 😊
@e.a.b.12823 ай бұрын
thank you sire, it's a nice course about edge detection.
@plcgoods3 ай бұрын
You are welcome💚💚
@agustinauta3 ай бұрын
Hay alguna manera de poder conectar el HMI real al PLCSIM o simular la CPU y que sirva para conectarse al HMI real. Intento hacerlo, pero al simular la CPU me sale un dialogo mencionando que al simular se desactivan el resto de conexiones, incluidas la de ethernet y por tanto no puedo conectarme al HMI real.
@plcgoods3 ай бұрын
I have not connected a real HMI to PLCSim. I think it is not possible to make a direct connection. Maybe an intermediate app like an OPC server can help you to create this connection. However, KepserverEx is software that can create an OPC server.
@haiangnguyen84083 ай бұрын
how my PLC ( for example S7-1200) connect to CODESYS???, thank you for your answer
@plcgoods3 ай бұрын
Hi, I have not connected S7-1200 to Codesys. You might be able to use OPC server to make such a connection,💚