Clearly Seen

Пікірлер

@daniilkolubelov1399 4 күн бұрын

Is it really going to show sodium chlorine level or simply TDS?

@ClearlySeen 4 күн бұрын

It’s going to give you the salinity level of the pool!

@kiloantraxs4 5 күн бұрын

Can I use it on above ground pool

@ClearlySeen 5 күн бұрын

It goes by gallonage of your pool is it at least 7000 gallons?

@kiloantraxs4 4 күн бұрын

@@ClearlySeen mine is 10k gallons

@ClearlySeen 4 күн бұрын

If you have a pump strainer basket then you would need a blue pool rx

@kiloantraxs4 4 күн бұрын

@@ClearlySeen a skimmer right

@ClearlySeen 3 күн бұрын

Pump strainer, basket or skimmer is required. Either will work for the Pool RX

@Oden2u 7 күн бұрын

What cal hypo did you use

@ClearlySeen 7 күн бұрын

Pretty much whatever they have at my local distributor it’s usually about 69% strength

@SleepyJoe408 7 күн бұрын

How do you know when it’s time to replace one?

@ClearlySeen 7 күн бұрын

Typically, when the outside shell of the filter starts to get damaged from the weather and sun, that’s when we recommend changing out it with a new unit

@WrdfrmGuero 16 күн бұрын

What do I do if I have no chlorine and ph high what goes first lower the ph and then the chlorine ?

@ClearlySeen 16 күн бұрын

Yes, you’re gonna want to lower the pH down so that the chlorine can be effective. If the pH is high, then the chlorine cannot kill the algae effectively.

@WrdfrmGuero 16 күн бұрын

@@ClearlySeen I don’t run the filter when I put the product in right I’m not sure what I’m doing I paid a guy to clean my pool $500 down the drain told me the last day he came I needed a bigger filter so I bought one another $700, at this point it’ll be cheaper doing it myself I have all the chemicals I’m just not sure the steps

@ClearlySeen 16 күн бұрын

Yes, whenever you’re adding any chemicals, the pool really needs to be running unless you’re putting a spray flocculent in like I did in one of my videos, and that case she would have it off other than that always keep it on

@kelm1123 18 күн бұрын

I'm definitely getting one for my 22,000 gallons inground pool.

@enj0ythesiIence 23 күн бұрын

Hi! My CC is 12 and FC is 3. How many gallons of chlorine for a 20,000 gal pool? My kids haven’t swam yet this summer.😢 Thanks!

@ClearlySeen 23 күн бұрын

I typically would try three or 4 gallons of liquid chlorine and make sure not to swim for a day and a half. If there’s any algae in the pool, you’re gonna have to go higher than that.

@enj0ythesiIence 23 күн бұрын

@@ClearlySeenI bought 6 gallons and just put 4 in. How long should I wait and what level of FC am I looking for? 12? Thank you so so much from my lil ones and myself!

@ClearlySeen 23 күн бұрын

Free chlorine is good at 3. To shock the pool is important from time to time. If the pool ever gets cloudy all of a sudden shock it just wait until the chlorine drops down over a day or two around 3-4ppm.

@enj0ythesiIence 23 күн бұрын

@@ClearlySeenwith the combined chlorine at 12 and the free at 3, I have milky water, which is why I wanted to be sure if 4 gallons would be enough.😢 I do appreciate you replying to me!

@ClearlySeen 23 күн бұрын

Since you have a free chlorine level of three already, 4 gallons should be helpful run it over night so it can filter. . Just make sure to clean your filter tomorrow.

@lailascott1377 24 күн бұрын

Great video! Get yourself a simple phone tripod - would elevate your videos so much! Keep up the great work!

@ClearlySeen 24 күн бұрын

I appreciate it. Yeah, that video was made several years ago and I have a tripod now. Thanks for watching.

@sashasand 29 күн бұрын

I wouldn't give them 5 cents

@bracetwin86 29 күн бұрын

Thanks i need that tefresher cuz my.instruction got wet and beed out on my taylor kit lol

@ColtKingOfficial Ай бұрын

Does the “manual lever on” have to be set to make the timer work or is the manual lever only set to on to turn it on manually. Can the manual lever be set to off and the pool timer still turn it on at the correct time?

@ClearlySeen Ай бұрын

You do not need any trippers for the timer to work if you flip it on without the trippers, it will just continuously run. It will not turn itself off. Once you add the trippers it will turn it on where the on tripper is and it will turn it off at the time the tripper is set to.

@48biggripp Ай бұрын

Rock on

@ray.a7343 Ай бұрын

Do u scrub it?

@ClearlySeen Ай бұрын

No scrubbing required usually stains will not even come up with any type of brushing. They need a acid to remove them. The one in the video works extremely well!

@ray.a7343 Ай бұрын

@ClearlySeen my plastic stairs are yellow was wondering if it penitrates the 4th step with is pretty deep thought you would have to scrub a little .thanks I ll try it

@ClearlySeen Ай бұрын

Also, if it’s ever above the water what you would want to do is use a glove, some protective covering for your hand. Sprinkle a little bit and add just a little bit of water. You can use a brush in that situation to move it around but remember it needs water to work properly

@RonGlass-wm9zf Ай бұрын

23,000 gallon pool. Filters 4, no back wash capacity. The pool has been setting for about 6 months. I added algecid. How much clorine to add?

@ClearlySeen Ай бұрын

If I was servicing that pool locally where I am, I would put about 7 gallons of liquid chlorine in the pool after I have cleaned the filters and set it to run 24 seven the second day you would check the free chlorine and clean the filters again if the chlorine is not on the high side, then you’re going to want to repeat With the liquid chlorine, the same amount again typically that will kill off the algae!

@majesticcrane9962 Ай бұрын

My pool is salt water

@ClearlySeen Ай бұрын

This works on All Pools as well as standard pools

@efraintinoco818 Ай бұрын

Im trying to to do this myself in a few days. Just to confirm, if im replacing the old filter with the same make and model, then i just unscrew the old inlet and outlet pipes, and screw them on to the new filter. Wont require any pvc glue correct?

@ClearlySeen Ай бұрын

If you have unions you’re going to drain the filter, undo the unions, put the new filter there attach the unions and then turn it on and everything should be good. Just make sure it’s the exact filter and same size unions

@poo2128 Ай бұрын

You call that cloudy lol mine is white blue lagoon

@davepelletier1041 Ай бұрын

how long does it take to unclog the unit?

@ClearlySeen Ай бұрын

Typically the first time works for dissolving the clog. Sometimes it may take an additional gallon of boiling water.

@davepelletier1041 Ай бұрын

@@ClearlySeen Thank you!!!

@ronandmischellewarner5156 Ай бұрын

Worked like a charm! Thank you!

@creekdoggthepups9876 Ай бұрын

If I have a digital on off and timer setting at the pump can I just take the off clip off completely so it stays on the entire 24 hours at the box manual timer? This since I’m using the digital at pump instead

@ClearlySeen Ай бұрын

Yes that should work!

@samaiyagiryan1789 Ай бұрын

Thank you!

@dougkeith7339 Ай бұрын

@clearlyseen this seemed to work perfectly! (Just need a few days to see if the tablets dissolve.) Thanks for sharing!

@mab826 Ай бұрын

I have 2 of these timers side by side. The timer for my pool filter would turn off but not on. Turns out the timer and motor itself are fine but the little metal rocker bar behind the timer wheel is worn down enough that the On pin slips over and doesn't trigger any longer. I haven't been able to find replacement parts for the T104R so I've been manually switching on my pool pump for a few weeks now. This morning I thought I would be slick and see if I could at least temporarily swap the plate with the metal rocker bar from my pool sweep timer and put it in my pool filter timer. I removed the timer wheel, removed the c-clip holding on the two remaining plates but my problem now is getting the spring clip that is between the two plates in the right position for the assembly to trigger the timer switch. I've tried to find any videos on removing and reassembling these parts but I can't find anything. I'm starting to think no one actually repairs these timers, they just replace them. Has anyone seen any tips on reassembling the plates behind the dial and how to set that spring clip, or am I just going to have to order a whole new timer assembly?

@ClearlySeen Ай бұрын

Anytime we run into issues like that. It’s best to replace the timer itself. If you’re looking for a video to replace the timer/dial as a whole that will fix the issue also remember timers only last so long before having your replace them

@ClearlySeen Ай бұрын

Pool clarifier I use - amzn.to/2yTFyfN

@ClearlySeen Ай бұрын

Pool clarifier I use - amzn.to/2yTFyfN

@Tbizzh Ай бұрын

I have the same unit, bought with house. When the timer is tripped off the clock stops and as a result never turns back on. What am i missing?

@ClearlySeen Ай бұрын

The first thing that I think about is to make sure that there is a on tripper on the dial as well you need a on and off and back on.

@Tbizzh Ай бұрын

@@ClearlySeen thanks. I've got both the on and off. Once the of turns the pump off, the time stops as well.

@ClearlySeen Ай бұрын

If the timer is keeping time, and the on tripper is not doing its job, sometimes it’s going to be you need a replacement on tripper. if the timer is not keeping track of time correctly, then you need to replace the motor that’s behind the timer

@audio2664 Ай бұрын

Hayward is JUNK. PATHETIC

@culinadomusfoods Ай бұрын

Will it remove both metal and copper.

@ClearlySeen Ай бұрын

Your best bet for medals is going to be metal out by regal. You can find that on Amazon.

@culinadomusfoods Ай бұрын

Ok Thanks,what I ment in my question will it remove both kinds of metal stainsI bought the 10lb citric acid, I will be using it soonI..hope it will remove all stains... used ascorbic acid last year comes out right away but that yellow color around my pool keeps coming back and like you said in your video very expensive

@javierarroyo4015 Ай бұрын

Awsome Now am going to do this.

@Bigwingrider1800 Ай бұрын

Can this be can used glass filter media

@ClearlySeen Ай бұрын

Yes, clarifier can be used in any type of filter.

@kimappreciateslife Ай бұрын

I have a timer like that for outdoor yard lighting, but my lights have been removed. However the timer won’t stop unless I turn off the breaker. The breaker switch also controls my light in my pool so I have to leave that off too. The person who lived here before must have tied the outdoor lighting timer in with the pool light breaker.

@ChristopherOlbrysh Ай бұрын

It's worked great for the algae but it caused stains on the floor of my liner

@ClearlySeen Ай бұрын

It shouldn’t have been caused by the pool rx but existing metals and or organics in the pool. I have been using them for along time never had an issue with any of my customers pools.

@rrose002 Ай бұрын

I have 2680 ppb 25000 gallon pool how much remover would I need using Orenda? Thank you

@ClearlySeen Ай бұрын

I would only use 8 ounces at a time and no more so put 8 ounces in test it in about four days after to see what your phosphate levels at and then you can do an additional 8 ounces if you do too much at one time your pool will get extremely cloudy

@rrose002 Ай бұрын

Thank you for the quick reply and your educational videos are top-of-the-line! Thanks

@ClearlySeen Ай бұрын

Buy The POOL RX BLUE 7,500 Gallon Pool To 20,000 Gallon Pool Here - amzn.to/3572eog Buy The POOL RX BLACK 20,000 Gallon Pool To 30,000 Gallon Pool Here - amzn.to/3aCoCar

@shawnnamiles4385 Ай бұрын

What do I need to do before taking it off? Do I just leave in service mode or something else?

@ClearlySeen Ай бұрын

I recommend shutting the power completely off to the equipment before doing the replacement

@henryfhenline6316 Ай бұрын

Love quick concise instruction. Thank you

@jeanlefebvreGenX Ай бұрын

Can you bypass the switch temporarily?

@ClearlySeen Ай бұрын

I’m not aware of how to do that. The flow switch has a little tab on it when that tab connects to another part it sends the signal saying that there is water flow. If you’re having to wait to pick up a flow switch, you can just use some liquid chlorine and chlorine tablets. In the meantime, to keep your pool from going downhill.

@magteix71 2 ай бұрын

Excellent videos!! You mentioned that you use chlorine tablets to maintain the chlorine level throughout the week, so it's necessary to chlorinate the pool weekly. My question is, how much chlorine (ppm) should you add to the pool to last the entire week before using the stabilizing chlorine tablets?

@ClearlySeen 2 ай бұрын

If you have a New Pool new pool liner, anytime where the water is being replaced, you have to shock the pool with liquid or granular chlorine and then you add chlorine tablets and that will maintain it. It’s going to depend on the size of your pool of how many chlorine tablets she’ll need to maintain, a three-part per million chlorine level I do recommend shocking your pool every two weeks unless it’s a salt pool.

@SharkDude1 2 ай бұрын

What is that second hole next to the skimmer suction hole ?

@donnaryan9675 2 ай бұрын

It would be nice if you showed replacing it. I have to do it next week.

@ClearlySeen 2 ай бұрын

The replacing of that particular filter with the exact same is shutting down the pool system, opening the air bleed valve on the top, opening the drain on the bottom of the tank, which just unscrews moving the old filter and putting the new filter back in the place and it connects directly to the unions. I’ll try to get a video up on the next time I replace one.

@LindaGliesman 2 ай бұрын

Where do you get this tool?

@ClearlySeen 2 ай бұрын

Link is in the description for the tool

@stevezx900 2 ай бұрын

Great product! It really works!

@marksullivan3424 2 ай бұрын

This product may work I have no idea, but if you follow the Troublefreepool method of pool care you will never have algae in your pool. High cya is usually the cause of Algae. The pool store tell you 1-3ppm or 2-4ppm of Free Chlorine. But if your cya is 100 you need way more chlorine than 2-4ppm to eliminate contaminants

@ludiblaceri6648 2 ай бұрын

I bought a new one, but it still won’t stop reversing

@baboof005 2 ай бұрын

80% used

@shawnleonard7827 Ай бұрын

I hope you're right, my pool is about a year old and when I do the test, I don't have any solid lights on my salt cell. I run it about 40% output.

@baboof005 Ай бұрын

@shawnleonard7827 no solid lights means it's new

@baboof005 Ай бұрын

@shawnleonard7827 I'm confused on video shows 80 percent, means 80 percent used, no lights means it's new

@ralphmarquez9548 2 ай бұрын

I have a problem with clorine tables not dissolving in my hayward automatic clorinater when the water is cold what do I do . I don't want to use liquid clorine . Because I have a vinyl liner .

@ClearlySeen 2 ай бұрын

It’s normal for chlorine tablets to dissolve slowly when the water is cold. If your pool needs chlorine when it’s cold use liquid chlorine.

@RR-gt4zc 2 ай бұрын

I can’t power it on. Tried pressing the reset button but does not fix the issue. Checked incoming power and that is fine. Is there any other fix for this?

@ClearlySeen 2 ай бұрын

I would recommend calling a pool company out to test it. Sometimes there’s fuses that below that need to be replaced.

@jenniferkarellas4402 2 ай бұрын

Does any brand of citric acid work or this specific brand?

@priyah608 2 ай бұрын

Does it work for concrete inground pool? If so, how best to use it?

@ClearlySeen 2 ай бұрын

It works the same for vinyl pools and plaster. And if you watch the video, it’s the same process. If it’s on the bottom of the pool, just shut the pool off until the water is not moving so it will sink directly to the spot.

@johnbyman3605 2 ай бұрын

Okay, thank you.

Ең жақсы KZfaq

Пікірлер