Must be a dealer thing they dropped my 2024 Busa 30 sec after I signed my paperwork. But DPS did what they said they would, they fixed it back to brand new.
@Skibidipomnirizzleredge11 күн бұрын
you sold the gsxr?
@mirkolo470311 күн бұрын
If I'm buying the 2025 model, I would paint the fairings to bring back 2021/22 model colors
@mirkolo470313 күн бұрын
how many whp does the grinch has atm?????
@EnviedKing11 күн бұрын
@mirkolo4703 I honestly have no clue. Bike hasn't been om a dyno in like 2 years and probably won't ever be on one again
@mirkolo47038 күн бұрын
@@EnviedKing If it had 207 at the wheel on the dyno, probably with carbon rims it's 210 at least. But were 207 the hp at the wheel?
@EnviedKing8 күн бұрын
@mirkolo4703 I'm not sure what 207 you're referring too. Any dyno numbers I've posted are all at the wheel.
@mirkolo4703Ай бұрын
will you ever get a 2 stroke supermoto when not racing ?
@EnviedKingАй бұрын
@@mirkolo4703 I've actually been trying to find one that I can rebuild on the channel. I could buy new but where's the fun in that
@mirkolo4703Ай бұрын
@@EnviedKing Well I can suggest something like bringing an old bike chassis and a few parts and putting a 700 2t engine in it (I know like Zabel is brand that produces that engine block) cuz supermotos and 2 stroke are really fun
@mirkolo4703Ай бұрын
is it busa or gsxr 1000?
@EnviedKingАй бұрын
GSXR1k
@mirkolo4703Ай бұрын
why you chose a gsxr1k instead of a cbr1k rrr f sp? @@EnviedKing
@EnviedKingАй бұрын
@mirkolo4703 I had a gsxr1k before the Honda was a thing. Also if you're trying to go as fast as possible, the support for the Honda not there to be competitive just yet
@camblueblack7763Ай бұрын
Looks like the H2 running good again. So you back on youtube now?
@EnviedKingАй бұрын
Not yet but soon.
@camblueblack7763Ай бұрын
@@EnviedKing looking forward to the new content
@supah2715Ай бұрын
Don't show em too much bruh. Lol
@EnviedKingАй бұрын
😂
@user-os1wh2op7dАй бұрын
I gave it to my friend who wanted an adjustment kit.
@themapmaker5374Ай бұрын
@2:00 , I found that it is not required to remove the rear body work to get the bushings out. Just gently pull up on the plastic and you'll be able to get them out without issue. The plastic body work is not brittle, so it won't 'snap' and break. Just be gentle with it and only pull up on it just enough to squeeze the bushings out. I just did this on my new 2024 'Busa and it went without a problem.
@TakekoffcyclesАй бұрын
whats your gearing on her
@EnviedKingАй бұрын
@@Takekoffcycles I honestly don't remember
@themapmaker5374Ай бұрын
I just got an Alien Head II exhaust for my new '24 Busa. Working on the install now. Brock's has it listed specifically for Gen-3, so hopefully I don't have any issues with it. I also got the Power Commander for it. This is my first exhaust install. You all posting these vids sure does help a noob like me. Thank you!
@oscargutierrez3773Ай бұрын
Please let me know how it goes because that’s exactly what I’m gonna do next
@themapmaker5374Ай бұрын
@@oscargutierrez3773 It went without any issues. The bike rides and sounds awesome. With that said, I am getting an "F1" error and the check engine light is on. This is because I removed both O2 sensors. It doesn't affect the bike at all, but just an annoyance. I tried plugging them back in again, but that didn't clear the F1 error. So....I'll have to call Brock's to find out how to clear it. As for the exhaust installation, just take your time and READ THE INSTRUCTIONS thoroughly BEFORE starting the install. Also, when you install the header pipe manifold parts, be sure the holes that hold the spring retainers are oriented correctly, or you won't be able to put the spring retainers on (the spring retainers NEED to be installed). The instructions fail to mention this detail! I have seen some YT videos showing draining and removing the radiator. You should not have to remove the radiator or the oil cooler. There are a couple bolts that hold the radiator in place. Just remove those and you should be able to push the radiator forward just enough to get your hands and tools in there. It's a tight space, but I was able to do it without removing the radiator. I recommend getting the PC6 with your exhaust purchase. As advertised on Brock's website, you can have it mapped for the Alien II exhaust for no extra charge if you purchase it with the exhaust. Installing the PC6 wasn't bad either. Again, just follow the instructions and you shouldn't have a problem. The inner-lower fuel injector connectors are buried in there good, so that will be the hardest part of the PC6 installation. Hope this helps.
@joras182 ай бұрын
Hey man, I came across your video recently because I have been trying to get my fairings off. I have not been successful. There’s is a video on KZfaq by a gentleman named NinyaOf1 and he shows how to take them off. The issue with his videos is that he takes every single bolt off and every fairing separately. It is very confusing. I saw that you took the front fairings and the side ones as one piece. Was wondering if you’d be able to maybe make a video showing how you managed that.
@oxiairsoft96962 ай бұрын
It always made me think why in litre bikes the wheel moves in neutral
@jayilla282 ай бұрын
Is this video older then 7mo
@jayilla282 ай бұрын
My guy had to re group 😂😂😂
@robcrawford10922 ай бұрын
I grabbed a Penta carbon system for my 23 BUSA. I've been trying to research but opinions are all over the place. Did you install the pair block off plates that came with the system and if not have you had any issues?
@gnd1113 ай бұрын
Wheelbase? 72???
@larrysovine29703 ай бұрын
Do u have to tune?
@Gamer-ade3 ай бұрын
These are awesome but I dont like anyone having access to my fuel tank.
@jaygill36583 ай бұрын
Is that OEM?
@danclifton76443 ай бұрын
That is one Beautiful Busa !
@Onlineghost2ohm3 ай бұрын
What a joker 🃏 asks about the Motul, yet has no clue about the 300V. Like he was ever talking about the 7100…..lol
@Onlineghost2ohm3 ай бұрын
Is that all a fully built H2 makes?! With the E.C intercooler and its stage 2-4 gears ⚙️ is only 340whp. That’s kinda low for a max effort H2. Maybe I’m just use to Hayabusa/ZX14 Turbo numbers running on pump ⛽️. Like what does race gas make? Anything over 400whp I would hope. It’s nice but for the money spent, not enough power for the dollar, but it’s different so I guess that’s enough for some. Good build either way.
@robertsenterprises904 ай бұрын
Now do that license plate bracket delete
@clintvosloo76944 ай бұрын
Tyres can make a difference. .
@Firebird1404 ай бұрын
Did you use regular fuel to get this type of hp or this with race fuel ? Mr12 !
@thungem56724 ай бұрын
I hate background music
@HAUSS814 ай бұрын
"FU*K COPS" 😂
@nickdubya99245 ай бұрын
Do I want a 2015 ZX10R or a 2023 GSXR?
@EnviedKing4 ай бұрын
Depends what you're buying it for. The GSXR will give you more options though
@nickdubya99244 ай бұрын
Actually went to a dealer that sells both, sat on the GSXR and my answer was obvious-ZX10R. I had a GSXR 750 I don’t remember the posture/tank being much of an issue maybe not as nice as my R6 but close, but the 1000 tank just felt intrusive and posture not as natural as ZX10R and R6 are
@Vincenzo9115 ай бұрын
That bike is doing it's max power on a 700 rpm range the R on only 200 RPM then you shift and lose 30% of top power..... The point of the RR is to buy it with the race kit , the engine is then full of torque everywhere and got another 500 rpm range on top without any reliability issue ... I would personally not buy the RR just a standard R and put carbon wheels and aviation brake hose with a racing exhaust and mapping for a start 🎉
@michaelrensel92565 ай бұрын
This bike did not make 198 on punk 😅
@michaelrensel92565 ай бұрын
Pump 😂
@Redir895 ай бұрын
What con rods did you use? Carrillo? and pistons? Part numbers please 🙏🏼
@bigbrooklynite70585 ай бұрын
That zx10r is 🔥 and the H2 is from another planet 👽. Thats funny that you call the zx10r The Grinch lol i thought the same thing when i saw the new one (2024) and the one u have in this video i call it The Marlboro(cuz of that nice white black and red kawa box font)
@JimboSlicee5 ай бұрын
Looks like you’re out in Vegas near me! Would you be open to helping me install my same exhaust on my gen3? Slightly intimidated and could use someone with prior experience!
@EnviedKing5 ай бұрын
Sorry but Im no longer in Vegas. Speed Demon is the place I tell people in Vegas to use when I'm not there.
@JimboSlicee5 ай бұрын
@@EnviedKing awesome! Thank you!
@CallDaCoroner5 ай бұрын
I have a 21 zx10r that has been having the same issue of not wanting to start after it’s hot. Kawasaki kept trying things and it didn’t work. Now they’re trying to tell me that it’s normal when it’s clearly not. Did you end up finding out what was wrong with the busa?
@EnviedKing5 ай бұрын
Honestly I've ridden the Busa maybe 3 times since this video and it hasn't done it but I've also not had to try and start it while it was hot either. I'll check it again when I pull it out of storage in a few weeks. The bike should start the same no matter if its hot or cold.
@FELiPES1016 ай бұрын
good to see a local rider...I'm in EH
@Cht.Gee3326 ай бұрын
What gearing you running?
@2023Hayabusa6 ай бұрын
@EnviedKing where is your video of the airfilter replacement you quoted in the last video?
@2023Hayabusa6 ай бұрын
@enviedKing Did you have to remove the fairings from both sides for this install or just the one side?
@WillieWheels6 ай бұрын
You no longer in vegas. If so let’s Ride out someday!!
@nameless40317 ай бұрын
The wet weight differential includes more than just fuel (4:55 mark). And saying "that's how much the bike weigh," is kind of odd.
@igholleywood83887 ай бұрын
Where did you buy the power commander? For the Honda cbr1000rr-r
@Knolgarcia697 ай бұрын
Hello, awesome video. I am looking to put a Penta Carbon exhaust on my 2024 Hayabusa soon. However, you mentioned that you were eyeing another exhaust for your bike. What exhaust would that be? Also, did you have to replace the engine oil when you removed the oil cooler?
@rohithhnrohithhn90107 ай бұрын
can any one tell if we get flash will engine life go down?
@bseidem51127 ай бұрын
Dyno
@CrusaderGeneral7 ай бұрын
once you pull off the fairing, are you able to access the mirror bolts?