Where are you from Richard btw great stringing skills
@wijardwong6 күн бұрын
@@vanshthavnani6073 Canada!
@georgefilik62912 күн бұрын
Hello great video! In which country are you?
@iSuckLime15 күн бұрын
the legend
@jyyae8615 күн бұрын
Textbook form
@jyyae8619 күн бұрын
Honey wake up, Richard Wong just posted another stringing video
@puipuia861323 күн бұрын
Sir, you use 5.5m for main and 4.5m length of string for cross (approx) right?
@wijardwong23 күн бұрын
correct
@wijardwong23 күн бұрын
Prob abit less than each because I use a reel
@bearxxxbearАй бұрын
Your knot... 1st half hitch and 2nd half hitch thru the 1st (normal practice), but why 3 loops instead of 1?
@dungnguyenanh5762Ай бұрын
It's very beautiful😊
@Brian_Pathitta_Life_JourneyАй бұрын
can i get this machine in USA?
@nhutoan84782 ай бұрын
Please tell me why you pull the last two main strings together?
@nhutoan84782 ай бұрын
Please tell me why you pull the last two main strings together?
@wijardwong2 ай бұрын
I did this back then in my old machine because the post always blocked the clamp for the last main string. So I pulled the last two strings together. Since upgrading to this machine I have not been pulling the last two strings. There is no major difference though.
@nhutoan84782 ай бұрын
@@wijardwong thank you so much <3
@nicholasse7enfold2 ай бұрын
Wow! Legendary Armortec!
@kembryy3 ай бұрын
satisfying
@stevendinh78123 ай бұрын
Hi! I was watching your video and noticed that you reversed your last two crosses. I was wondering if there is any benefit to doing it this way as opposed to doing it normally?
@wijardwong3 ай бұрын
Hey Steven thanks for watching! I've been doing this since the beginning of my stringing and my thought process was that if I reverse the last two crosses, there'd be less tension loss overall as the 2nd last cross would be sandwiched between two different cross strings which will have more friction to keep the string bed tight. Ofc there is no right or wrong answer but it's just what I've always been doing.
@VihanVlogs4293 ай бұрын
First your fan I am love from India🇮🇳❤❤❤❤❤😊😊😊
@miguelv29853 ай бұрын
Have you used the 88S Pro (emerald/blue)? if so, how does 3rd gen 88S compare to it?
@amitkhuraijam61612 ай бұрын
I didn't use 3rd gen but I am using 2nd gen 88s pro , it is good to maneuver like nanoflare at defense and everything but something lack power at smash from 3rd court
@hansom254043 ай бұрын
nice game dude keep on going
@replicatorman4 ай бұрын
of course the infamouse underrated nanoray z speed
@iantanyixiong67824 ай бұрын
Really efficient stringing! No wasted movements, tools were placed where they were supposed to be placed. Such an enjoyable and satisfying experience. Really learnt a lot from this! Thank you!!
@vycanismajoris91414 ай бұрын
what a rare gem ! is this yours sir ?
@wijardwong4 ай бұрын
It is not unfortunately haha
@jasonf74 ай бұрын
thoughts on 3u vs. 4u? what do you use?
@wijardwong3 ай бұрын
I use the 4u here. The 3u is quite heavy and not sure if it's fit for doubles
@Versatile_714 ай бұрын
victor racket li-ning machine yonex string nah that insane
@ANIME__KING692 ай бұрын
😮
@VihanVlogs4294 ай бұрын
First
@VihanVlogs4294 ай бұрын
First
@dillan47034 ай бұрын
comparing the new 88d to the 2nd gen, does it feel lighter and easier to maneuver?
@wijardwong4 ай бұрын
Yes it is lighter and easier to move. However I still feel the defense is Abit hard to control especially soft blocks to the net
@jerryhellstrom304 ай бұрын
Under 10min no problem..
@SJPDurham4 ай бұрын
I remember stringing with an APACS electric central clamping machine. So easy to use compared to manual version. Shame they cost best part of £1,000.
@TonyNguyen-it7vd4 ай бұрын
Impression on exbolt 68?
@liamnguyen58704 ай бұрын
Trash, Ex65 and 63 still much better. 68 doesnt give a good hitting sound, the shock repulsion is really low, force u to use more power to hit the birdie which makes u tired faster and faster. Overall, 6/10
@TonyNguyen-it7vd4 ай бұрын
@@liamnguyen5870 thanks
@wijardwong4 ай бұрын
I haven't tried the string yet but I'll probably be stringing it soon. That being said the repulsion is reported to be lower than the previous two exbolts. Durability is to be determined
@adrienjoshua67104 ай бұрын
Did you play with other models like the Play, Game, and Tour? The Pro is just out of my budget yet.
@wijardwong4 ай бұрын
I haven't yet, but I have strung a 1000z tour before and it seemed pretty solid and with an easier flex than the 1000z pro. By going off this I think their lower tier models should be a good racquet if your budget isn't there.
@janmarren4 ай бұрын
where u get that from and how much it cost
@janmarren4 ай бұрын
where did u order all that from and how much did it cost
@tomsong3074 ай бұрын
Heard there was a shipment delay, are you located in Canada?
@wijardwong4 ай бұрын
Yup!
@SyntheticB4 ай бұрын
Woah you weave your crosses so nice and quickly!! I've been struggling to string faster and I think my weaving is a big culprit. Is there a particular resource on technique or tips that you have?
@wijardwong4 ай бұрын
There are some old videos out there that explain efficient weaving for crosses. For me: 1. make sure tip of string is cut at and angle and not fraying 2. as you see in the video I always have one string weaved ahead before pulling the next string. This ensure a soft weave every time so its easier. If you don't have one string weaved ahead of the tensioning string then its called a hard weave. 3. as you see in the video, i weave pretty parallel to the strings and straight directly to the next hole. If this doesn't work out smoothly you can weave like a "parabola" shape to decrease friction between strings
@rittersports04 ай бұрын
Nice detailed impression ! Have you played with the 77pro? How would you compare it to the 88 D/S?
@wijardwong4 ай бұрын
I'd say its abit head heavier than the 77pro with a slimmer shaft and overall faster. I can't say much on the stiffness comparison but the shots on the 88d definitely feels more solid but the 77pro is more solid than the 88s. In terms of touch I'd say the 77pro falls right inbetween the two 88.
@rittersports04 ай бұрын
@@wijardwong thanks! That's interesting, the D being head heavier but still faster that the 77 !
@wijardwong4 ай бұрын
@@rittersports0 I believe the frame head is a tad smaller and shaft is slimmer keep in mind
@andywong37884 ай бұрын
First ❤
@Andy-fo5fw4 ай бұрын
Hey Richard, have you tried this racket? How does it compare to the original 88s and 88s pro 2nd gen?
@wijardwong4 ай бұрын
Will be posting a first impression video soon actually. But overall I think it's a different racquet compared to the previous generations as from the players that used this and currently using the 2nd generation.
@Andy-fo5fw4 ай бұрын
@@wijardwong oooh thats interesting. I will be waitingg for it!!
@jackylin29394 ай бұрын
this is a werid hybrid combo
@wijardwong4 ай бұрын
Clients request
@VihanVlogs4294 ай бұрын
First
@johnlina34385 ай бұрын
where did ya buy the stringing machine?
@wijardwong5 ай бұрын
Lining
@pmsanthosh5 ай бұрын
I have the same racket
@raymundmonica88845 ай бұрын
What is the difference between starting your cross at the top between starting at the bottom?
@wijardwong5 ай бұрын
There are a couple topics on this: 1. bottom up compared to up bottom can cause a change in the sweet spot of the racquet. So with a bottom up it can change the sweet spot to higher on the frame 2. simply preference and machine, my old machine i did top bottom because i felt it played better 3. its "safer" for the racquet to do bottom up rather than top bottom. There have been reports back then where ppl break racquets during stringing doing top bottom especially high tension stringing. This is just by other's report and not proven
@afreen1185 ай бұрын
can i get one badminton racqet i have the broken i am using the broken ones can you gift me one
@royalmrsmile5 ай бұрын
Keep it up man, satisfying as always
@tu30.phamtuan375 ай бұрын
đẹp quá
@Andy-fo5fw5 ай бұрын
thoughts on this racket?
@wijardwong5 ай бұрын
head heavy but not as heavy as the 99pro and 88pro series, stiff shaft but not unforgivable (more stiff than the original 77). The hitting feeling isnt as solid as the original 77 but sharper
@terencemitchao5 ай бұрын
I like this view better
@Bikram08055 ай бұрын
What is the cost of the stringing machine?
@tatangarch995 ай бұрын
Isn't max tension armotec 700 are 25lbs? Save to make it 28lbs?
@wijardwong5 ай бұрын
Old Yonex racquet recommendations are for warranty sake. Back then they would always have it lower than 24 or 25 lbs. These racquets can easily have 30lbs if strung correctly and proper grommets. Ofc you'd lose your warranty on the racquet
@tatangarch995 ай бұрын
Thank for your answer, i think the waranty cant be claim for broken racquet even in 25lbs tension. And i just want to use my armotec 700 in 26lbs...its enough for me 😊
@failuq5 ай бұрын
hi richard, have you experienced that the brush on the stencil ink already wear out while the ink is still about half bottle ?
@wijardwong5 ай бұрын
Yes in Yonex bottles. Not with the linings. Either the brand or I use the stencil kit often enough to prevent the brush to wear out