This was our favourite demo at the Craftsman course!
@VaughnAviation21 күн бұрын
where are your gloves though?
@MayerArcАй бұрын
Hahhahahahhahahahahhah ur sh..t pad :D No led on the after shot?? hahahha paff sh...t company
@mikea5205Ай бұрын
Great video.
@DetailKingАй бұрын
Thanks!
@alexobor7954Ай бұрын
How do I get this product?
@DetailKingАй бұрын
You can purchase that product on our website: store.detailking.com/revival-bumper-trim-restorer-for-cars
@JeffBourkeАй бұрын
There not much benefit for the rubber floor mat. Just regular pressure wash or scrub. The real benefit of tornador is interiors and semi permeable surfaces, seats, roofs, crevices etc. this is not a very helpful demonstration.
@martinzendejas8423Ай бұрын
Solid tips 🫡
@DetailKingАй бұрын
Thank you!
@socialjusticewarrior9601Ай бұрын
Detail king is junk. Just like you.
@jeffkirkwoldАй бұрын
Thanks
@user-kd1nc4kn5l2 ай бұрын
Let me be the first to tell you no matter how good or thorough as a rental car detailer, the large office staff is so often out of touch with what is needed to make the car right that they that pressure the Detailer to have to cut corners. In fact some rental Managers don't even set their Detailer up for success due to time constraints imposed, lighting, equipment issues. In the office, they want the Detailer to skimp so the they can make a Rental. This then puts the Detailer's job and reputation on the line. FROM A PRACTICAL STANDPOINT THOUGH, NOT ALL RENTERS WOULD WANT TO WAIT LONG AND ARE NOT AS NOT FUSSY AS LONG AS THE CAR IS FUNCTIONALLY CLEAN. Very frustrating for the Detailers that try to do a higher scale job. And yes, the office will at times just pass down the blame on the Detailer, maybe costing him or her their job. Rental car Detailers should be better protected for the time they may need to do the job better. ANY WAY THE DETAILER CAN DOCUMENT AND PROTECT THEIR RIGHT TO PRODUCE A BETTER PRODUCT I WOULD BE ALL IN FAVOR OF FOR THEM.
@benibarra232 ай бұрын
How does this remove stains if it doesnt suck anything up? Where does the dirt go?
@DetailKing2 ай бұрын
You would want to use this machine to break up the dirt, and then use a towel to wipe away the dirt it breaks down.
@benibarra232 ай бұрын
What about thicker carpet with a pad?
@monkee.racing2 ай бұрын
Looks like a good idea but also looks fiddly and messy
@PROSKULL372 ай бұрын
💀💀💀 me and the homies when we tackling our cars
@jerkface382 ай бұрын
Could this work with a 120hp? I have a wand my friend gave me but it doesn’t seem to have much suction so im doubtful of its compatibility or it may just be missing something
@DetailKing2 ай бұрын
Yes, the 10" floor wand does work with the HP120. If you are having trouble with your existing wand, I would check to see if there is anything restricting the air flow inside, but you are looking for an alternative, the floor wand should work great.
@CGP98563 ай бұрын
I have a black Acura can you recommend items for black cars
@tobyfletcher76163 ай бұрын
Why does it look like you taped it back together with red tape?
@TravGreencorn3 ай бұрын
How many decibels is this unit when running?
@moredatesmorefiber35263 ай бұрын
i love detail king
@AllAboutTheDetails4 ай бұрын
Nice tip thx
@donniev81814 ай бұрын
What's best for new black trim?
@DetailKing4 ай бұрын
For new black trim, you can use either a ceramic coating or a product like our Revival: store.detailking.com/revival-bumper-trim-restorer-for-cars
@donniev81814 ай бұрын
@@DetailKing thanks!
@beristainbear39244 ай бұрын
Wow, I’ve been wanting some clay
@timreed97224 ай бұрын
So how come this is no longer available? I would totally buy one.
@DetailKing4 ай бұрын
We were able to change the formulation of the tablet to be rapid release, without the need for a diffuser. You can find our new quick release tabs here: store.detailking.com/chlorine-dioxide-vapor-generator
@michael2454 ай бұрын
ok but you didn't actually say what graphene is or does to the car you just explained the proccess
@aravgamer43125 ай бұрын
This bike i drive in gta vice city game my old memory
@jaimedpcaus15 ай бұрын
How long doea it last? Ia it worth it for a home?
@kahlenoa0005 ай бұрын
Strange that it is no longer for sale.
@brucekrueger79825 ай бұрын
Cheap manufacturer use cheap products my vehicle is 20 years old sits out in the northwest weather no spots, dodge
@williamwyles81725 ай бұрын
Sandpaper works pretty well too
@kaiden_and5 ай бұрын
The glass should be tempered so it is unlikely to get scratched, but also using a magic eraser may be another good option
@ZPS514915 ай бұрын
Steel wool on glass?
@jaysartistry65305 ай бұрын
Stupidest shit I’ve ever heard
@coolnationusa7865 ай бұрын
Tempered glass, more scratch resistant
@ZPS514915 ай бұрын
@@coolnationusa786 The lenses of my glasses are tempered, doesn't mean I should clean them with steel wool.
@DetailKing5 ай бұрын
As long as the steel wool is the correct grade, either 000 or 0000 grade, it is safe to use on automotive glass.
@BigBear--5 ай бұрын
Do I need to use a panel wipe after using Caliber? Or go straight to coating after just a microfiber wipe down?
@MikeGDetailing6 ай бұрын
Nice video comparing the various coatings. How would the appearance of Jet look on a matte surface?
@DetailKing5 ай бұрын
Thank you! The Jade Jet will have an appearance somewhere between the Jade Ruby and Jade Sapphire. It will be a bit darker than the Jade Ruby due to the increased amount of active ingredient, but not as dark as the Jade Sapphire because it has a lower viscosity.
@MikeGDetailing5 ай бұрын
@@DetailKing thank you. This helps a lot.
@senexon6 ай бұрын
Your red = my orange
@GeneralRELee6 ай бұрын
What about internal vs external spray?
@Matt-my7pz6 ай бұрын
Ammoinia, hydrogen peroxide and vinegar (acetic acid) are all very different. Is it just the steaming of liquid on the stain that does it. If just water will do aswell then why use additives.
@BigBear--6 ай бұрын
Isn't it pronounced Roo-pez....
@BigBear--6 ай бұрын
How are these compared to the Lake Country microfiber pads?
@mrslickdetailer96526 ай бұрын
Roo Pez
@iflylow62246 ай бұрын
This works like non other!!! Amazing product with lasting results. Well worth using….
@iflylow62246 ай бұрын
Man if your a professional detailed and don’t use that method you truly are wasting time and money!!! It’s the little things that matter!!!
@rayunseitig63676 ай бұрын
I have beige and want dark gren
@scentsei82017 ай бұрын
Do you ship to Europe?
@DetailKing7 ай бұрын
Yes we do!
@MichaelWarbux7 ай бұрын
Black Cherry is a TOP TIER soap. Easily my favorite soap that I use when detailing my car.
@tomassalazar27987 ай бұрын
Wow 😮
@Nathaniel19917 ай бұрын
Funny shit
@itzeli__14757 ай бұрын
Bro let his intrusive thoughts win
@funcle_kevin7 ай бұрын
Is still stuff still available? I'm down to about an ounce and I can't find it anywhere.
@DetailKing7 ай бұрын
Hello - Jade A70 has been rebranded as Jade Ruby. You can find it here on our website: store.detailking.com/jade-hydrophobic-ceramic-coating-spray
@funcle_kevin7 ай бұрын
@@DetailKing Right on! That stuff is amazing. I'll definitely be picking some more up soon.
@funcle_kevin7 ай бұрын
Is A70 still available? I'm down to about an ounce left and can't find it anywhere. The "Ruby" variant keeps popping up, but it's unclear whether or not it's a similar product.
@AKHKCZplus7 ай бұрын
I do this for a living. It’s the worst, but at a $100 plus per hour minimum (depending on how much there is, & how badly a DIY’er unintentionally screwed it up This project can be done by anyone. But, lack of patience (I get it), back pain, and blisters tends to make it worse. The vast majority who bring their vehicles initially attempted remove it themselves. Tools needed (heat gun, 3M wheel, plastic blades, adhesive removers), but the utter frustration is too much for many. Again, totally get it. While saving lots of money, unfortunately it’s an extremely long, daunting task, & people rightly give up. But, it’s worth it. That said, 3m Magic Wheel, lots of plastic blades, heat gun, & for the hard adhesives there’s no better product than what the pros use. Rapid Remover for underneath primers, & adhesives. 3M Eraser quickly eliminates plastic film, but leaves (high heat) rubberized debris (don’t not use on film installed on front fiber class. It will destroy it. Once plastic is eradicated on every steel component apply RapidRemover, takes an a minute, can be used on plastics, & Iturns all the harden plastic into gelatin, & scrapers go through it like a thurmobaric bomb dropped on concrete rubble like a knive through butter without damaging any clear coat, or paint. It’s is pain, & take your time. Far outweighs the $700 to several thousand dollar paid to a guy using the same products. And steamers might be good for thicker vinyl generally installed over a vehicle’s front fiber glass bumper (wheel heat from Eraser will take finish right off) making it’s useless, but for the majority of cracked, steel applied PPF the wheel is brilliant.