very ugly cheap tattoo 😅😂

In America we have kwisket and shelege brand. We have same lishi tool over here. Ive seen the videos of using a 6 pin lishi on 5 pin locks. You can pick numbers 1-5 just forget about number 6. Some said to put a spacer on the shoulder, and skip number 1 and pick 2-6 instead. Same concept just different order i guess. This wouldn't work for UK locks? I guess if u want to be REALLY secure, just order an american lock, and i order a UK LOCK and NO ONES getting in 🤣 UK lishi wont work, and American Lishi won't work at that point. 🤘😆🔥 Just swap locks 😜

04:23 tips

Extremely informative video. A quick question for you. Which lishi tool would open a ASEC 11875 5 Pin Euro Cylinder. Obviously like you mentioned in your video lishi are meant for Yale only, but they do open others. Also this key number 4EA278 that is for Assa Abloy 6 Pin Euro Cylinder, what lishi would be suitable for the cylinder??.. Regards T

Any tips for helping me connect mine to the app on iOS? I can get it to connect to my Windows computer just fine, but it will not detect on the iOS app on my phone.

A very interesting video, thanks for taking so much trouble. A question, if I may. Which lishi would you suggest for a beginner for mainland European house door locks?

I've seen on alot of them an IC card number? What does that mean?Thankyou

Can I use that lishi on the Ingersoll padlock ? Robbie from huyton Liverpool UK 🇬🇧

Great little pick there I really enjoyed it you mentioned filing the pick so it fits the I'll give that a shot ..thanks for that tip.. Robbie from huyton Liverpool UK 🇬🇧

Bet your hoover rattles when the van is vacuumed - nice picking and explanation Gav.

Great job!

Only Gav will gut a lock whilst sitting in his van and make it look like a piece of cake. 😉 Serrated style pins can be a right old deceiving pin, you think you've got it but you ain't. Cheers sir.

Wow, I would love to get my hands on 1/2 of one of those 1* yale euro locks.

Very good camera work considering you’re in a van 👌

Thanks for the information 👍🏻

That is a great modification to make for mobile power for your scope. Thanks for sharing this ideas, I think it can be adapted for other things to, cheers

Great setup!! 👍🐈‍⬛🐾👏🍻

Are these scopes from Ebay and Ali Express for around the £200 mark any good? I want to get a scope but don't want to spend 200 on something if it's junk? But a uk company want £700 plus VAT and then the light sorce on top of that? Any advice would be good 👍

Good tip, mate. I have a cheap light source, and you're right it doesn't hold its charge well. 👍

I can’t find any of these online, is there a link?

So the Lishi KW1 and KW5 will fit in a Yale keyway. Can you pick the Yale using the KW1 or KW5?

With the Master van pucklocks, can’t you open those by driving another van with a pucklock into them?

Do als sell to locksport or locksmiths only

Hello, how can I subscribe to this tool?

REf below I may have found out why the pick was sticking, I tried on the first pin and the pick head became stuck between two pins and would not turn in any direction, then with the hand pick I pushed down on the pin and the complete was released, I am using 7 pin locks and the problem might be the pick head is a bit to wide in between some pins but more of a problem when you become between pins 56 or 7, but not all I do not wish to file down the pick head at this stage. Thanks Michael

HI I have just bought this Lishi style 7x7 pick, I have tried the pick on 3 locks, but have come across a problem, every so often the pick will over turn and get stuck in the lock body, the ;pick body moves back not fully out but the pick will not move it cannot be turned To release the pick I have to take a hand pick and push into the body a few times to try and release the pick. I might have over picked and became stuck in between the pins, what is the cure for this problem, when every thing works it is a very good tool. Thank you Michael

HI I have just bought this Lishi style 7x7 pick, I have tried the pick on 3 locks, but have come across a problem, every so often the pick will over turn and get stuck in the lock body, the ;pick body moves back not fully out but the pick will not move it cannot be turned To release the pick I have to take a hand pick and push into the body a few times to try and release the pick. I might have over picked and became stuck in between the pins, what is the cure for this problem, when every thing works it is a very good tool. Thank you Michael

71 in a 70 😮

Brilliant video mate nice work 👏

Good work Gav, you make it look too easy 👍

Great video Gavin

I love JITF videos churrs GAV!

Excellent video Gav...

"NOT LIKE IN THE MOVIES" 😂😂😂 What we're they expecting, plastic explosives 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂 You has the choice of mildly noisy family for the first safe or noisy construction workers with the second safe 😂 Great video as always 😉👍

Interesting. When regular people think of safe opening, thinks of big vaults and a dial.

Great job Gav and thanks for taking us along.

👍

Hi what size is the neodymium magnet for these, also whats the name of the tool you use to push the pins down in order to enter the magnet. Thanks

Very, very nice Gav. That's a fine instrument. God bless you and yours mate

Nice one, mate, not played with one of them yet.

nice!

I have found this very thing. Very informative sir 🙂👍

Nice one GAV churrs for that !

Nice upgrade! Thanks for sharing and enjoy the rest of your week.

Great job! What lock amp do you use?

Nice one Gav 🤩

My bad

Excellent demonstration mate. I wish I could sit with you and get some help on using my Ultion WXM Lishi, (which I did manage to get the lock opened within 40 long minutes or so, but it was more luck than skill. Haven't managed to open it again) & my Ultion 3 Star lock, which I haven't opened with the correct Lishi. I'm sure I'll get it sussed sooner or later but it's disheartening and frustrating 😂😂. Cheers Gav. God bless you and yours mate.😢

Nice, are they pricey Gav?

Excellent tool, and nice video! Thanks!