We are not the manufacture so Im not sure what the alarm 28 is? You have to satisfy alarm prior to resetting it. I believe pressing the up and down key resets alarm.
@dorodo11252 ай бұрын
Probably no one is going to see this but thank you
@BidServiceLLC2 ай бұрын
Its been viewed over 100 times but okay.
@renukathill38153 ай бұрын
I’m looking for the manual online and can’t find it
@BidServiceLLC3 ай бұрын
You're not looking hard enough.
@BidServiceLLC3 ай бұрын
Google "quadtech sentry 30 ac/dc/ir hipot tester manual"
@LuisTorres-gw6dgАй бұрын
Did you ever find one? I just came across this antique and all I find are for the newer ones. The main concern is programming since everything else is almost the same
@behrang593 ай бұрын
In my dektak system, when I run the dektak program, an error appears at the stage of communicating with profiler that says can't conect to profiler for trobleshooting please verify that 1- the unit is powered 2- the unit is attached to one of com1 to com4 port . In your opinion, where does the problem come from, the system is on, the list and the ports are correct
@BidServiceLLC3 ай бұрын
I would try and connect to the different com ports. you will need to reboot system and computer each time.
@jerrycolquhoun3 ай бұрын
Any chance you have a pinout for that connector on the back of the thermometer?
@BidServiceLLC3 ай бұрын
Sorry this was sold and not at our facility.
@qussaialiraqi36613 ай бұрын
Wawwww
@shawncalderon49503 ай бұрын
Can you copper plate with this machine?
@BidServiceLLC3 ай бұрын
Copper plate? This is made for etching SEM samples?
@shawncalderon49503 ай бұрын
Thank you for your prompt response. I had watched a KZfaqr use a similar machine to metal plate any material. I also found a person on eBay selling a used machine for $475.
@panfilolemusa24434 ай бұрын
No sir e el termostato
@BidServiceLLC4 ай бұрын
The digital display is the controller with temperature readout.
@cristianomarco2274 ай бұрын
I have UV WinLab verion 2.80 on win XP pro but i must reinstall the program. Have you a link for download ?I have a Perkin Elme spectrophotometer model Lambda 11.Thanks for help
@BidServiceLLC4 ай бұрын
We dont have software, sorry.
@rlg2224 ай бұрын
I've been using SE600L-3-3 upgraded from the 7800 to 8800 and SE-650-15-15 that comes with the 8800 and has the DAQ plus Ln2 boost. Its been an impressive test chamber.
@BidServiceLLC4 ай бұрын
Thermotron make great systems.
@rikeshshrestha33255 ай бұрын
I need an external vacuum pump for the same instrument. Which one did you use for your setup?
@BidServiceLLC4 ай бұрын
We use Gast Diaphram pumps that dont use any fluids to run.
@atulmahitkar95995 ай бұрын
Buy now
@spyrosntais14425 ай бұрын
Is it necessary to have the chiller?
@BidServiceLLC5 ай бұрын
It requires a special chiller and will not satisfy EMO without it.
@spyrosntais14425 ай бұрын
@@BidServiceLLC what is EMO? I contacted in the past Oxford about it and they said it can be operational without chiller but just connected to house water. Can this be possible?
@robertkam78815 ай бұрын
Emergency off button thats on chiller. On the back of unit there is a plug for chiller, it needs to be plugged into a jumper plug or chiller to allow system to power on.
@mdjuwelranajoymdjuwelranaj42975 ай бұрын
please give your countact number
@mdjuwelranajoymdjuwelranaj42975 ай бұрын
hi
@lowbatteries63915 ай бұрын
can i ask what one of these cost?
@INOXIGENICO6 ай бұрын
Hello dear friend, I have a detector equal to HLT 160 and I have a problem, it does not exceed -unit2-
@INOXIGENICO6 ай бұрын
What can be.? Do you carry out repairs?
@BidServiceLLC6 ай бұрын
Sorry, we dont do repair work.
@user-kl6zz9ce2m6 ай бұрын
Hello dear friend, I have a detector equal to HLT 160 and I have a problem, it does not exceed -unit2-
@marrytesfu31637 ай бұрын
Thank you for your effort
@naimsaleem66418 ай бұрын
How do you change the filter bag?
@hyperai13138 ай бұрын
did anyone elses video get stuck a 4:25 😂😂🤔😐
@wli57298 ай бұрын
hello, good videos, we make wafer dicing saw more than 20+ models
@user-ut9hs7bs4u9 ай бұрын
please make a detail video
@BidServiceLLC8 ай бұрын
The system is sold
@Gabriel_C.9 ай бұрын
This microscope it work in observ blood cells ? Thank you !
@BidServiceLLC9 ай бұрын
This is used in the Semiconductor Industry with the stage.
@Gabriel_C.9 ай бұрын
@@BidServiceLLCThank you !!
@marrefabbes45379 ай бұрын
hello , can you send me the right software for the system HL5900 ( Hall Profiler System)
@BidServiceLLC9 ай бұрын
You will need to contact manufacture.
@tca5809 ай бұрын
hi , lamdba series software link please ?
@BidServiceLLC9 ай бұрын
You have to contact Perk and Elmer
@jmcrate10 ай бұрын
Pretty disorganized and nearly impossible to hear.
@BidServiceLLC9 ай бұрын
Sorry that you don't understand. The purpose of this video is to show our customer the functionality of their system they bought from us. It shouldn't be used as a training tool. Thank You for your comment.
@brahimservice812210 ай бұрын
Sir; Could you please share with informations about someone who sell this great machine; Please
@BidServiceLLC10 ай бұрын
Check our website inventory or call us with the number on the video. We have inventory coming in weekly.
@ofir2gariany11 ай бұрын
How would I know what is power of the curing?
@BidServiceLLC11 ай бұрын
Contact manufacture
@TheAmbassadorOfQuan Жыл бұрын
Just randomly pressing buttons and inverting a DC signal with a 1MHz low-pass filter...lol
@BidServiceLLC Жыл бұрын
Actually scanning the different output setting. Not filtering... LMAO
@bradw778 Жыл бұрын
I used these for 11 years. Great little scriber.
@AaronBordeaux Жыл бұрын
Hello, is there a complete manual for this scriber? I'm learning how to use it myself. Thank you
@aliarslan107 Жыл бұрын
Hi Good Evening, we have this counter since 2001. Is there any calibration required for this meter or in internal circuit any parts replacement for better result, please.
@BidServiceLLC11 ай бұрын
Sorry we are not manufacture and just a reseller.
@madihaiftikhar6956 Жыл бұрын
If detector show Fail 1 error then what should i do
@BidServiceLLC Жыл бұрын
We are not the manufacture of system. Just a reseller.
@hasanhusni6110 Жыл бұрын
Price for thid item
@BidServiceLLC Жыл бұрын
Sold already
@ddl7653 Жыл бұрын
my p-11 is failed initialize. mottsk Motion failure: Axis = 1, PWM= -113 REBOOT the system How to fix it?
@BidServiceLLC Жыл бұрын
We are not the manufacture. We refurbish to factory specs and our videos show our customers the functionality of their systems.
@ddl765310 ай бұрын
@@BidServiceLLC my dear friend "My program has been deleted, and I wanted to ask if I could copy a program file from you?" "If you can provide the P11 program, you will save my world."
@ddl765310 ай бұрын
I am looking for the Profiler
@BidServiceLLC10 ай бұрын
@@ddl7653 Sorry this system was sold.
@ddl7653 Жыл бұрын
my p-11 is failed initialize. mottsk Motion failure: Axis = 1, PWM= -113 REBOOT the system How to fix it?
@KingSkrap Жыл бұрын
Got one from my school. In the middle of trying to figure it out for my geckos which just laid an egg!
@user-cy7xb3pt4x Жыл бұрын
Thank you for the vid. You would happen to have a demo for the BF51731 BC 1 model also.
@BidServiceLLC Жыл бұрын
Sorry, our videos are for our customers to see their purchased system operating properly.
@benrivera651 Жыл бұрын
I remember working here, they couldnt keep anyone to manage the production floor. Quality was laughable at best,, customers would return our machines to us, inside our competitors crates lol.. one was actually marked with,, "Return to Vendor--GARBAGE" ..lol
@roconzhen Жыл бұрын
I became a Trio-Tech technician. 11 years ago,
@user-rx6jp6mi1h Жыл бұрын
Whats the price
@BidServiceLLC Жыл бұрын
This was sold.
@LeeLee-zc4bm Жыл бұрын
Hello, I am a person who uses the Edwards IH series pump in South Korea. The PDM (PDT) is experiencing a "Service Due" 1401 Warning statement. I want to reset Run Hours 65535 hours. Can you tell me how? I know how to do serial communication, but I don't know the protocol command. I ask for your help me.
@BidServiceLLC Жыл бұрын
I would contact edwards, we are a reseller and dont have that information.
@user-xk5lj4ey4j Жыл бұрын
Thank you very much! The video is amazing!
@MetProduct-td4rz Жыл бұрын
Is this some sort of washing machine or something?
@christianvazquez907 Жыл бұрын
Where did u get manual of that model?
@giodossantos17109 ай бұрын
Have you found any luck sourcing one of these manuals?? I need one for a 24" lapping system and can't find one for any model
@christianvazquez9078 ай бұрын
@@giodossantos1710 No, im sorry. Couldnt find anything bout that model
@montoyamontalvomariaisabel6333 Жыл бұрын
How can i adjust or set the pressure ?
@harlesontenorio43345 ай бұрын
Hello, Did you manage to adjust the pressure?
@khoile7344 Жыл бұрын
Error: System pressure wait hold, help me please
@BenjaminBrown992566 ай бұрын
@khoile7344 Having this problem, did you ever fix it?