Why do you need to cut the USB cable? Why not just go from USB-C into your computer?

Where is the site to go and look into option for buying manuals and enclosures?

Love it. It's on my list now. Thanks for sharing!

Great review. I've been lusting after the VRS after loads of recent research. I'd love a 15nm+ wheelbase but, honestly, I'm a VR-only sim driver and my livelihood is completely dependant on the well-being of my wrists and fingers... I'm concerned that a bad twist of the wheel (while I can't see it in VR) at even 9nm could do me a ruinous injury. I had kind of mentally settled on the idea of the Moza R9 v2 and running it around 7-8nm in VR but I'm concerned that you weren't getting a decent feeling in the centre of the wheel. I'm still rocking an old gear-driven wheel with easily 1000 hours on it (but nice loadcell pedals) and it's the poor centre that drives me crazy. It's not like Moza R9 with a wheel is "cheap" throwaway purchase either. I'm a bit stuck in indecision.

Great stuff Ray!

Big bro wheel looking real good. I know thats gonna be your pride and joy. Looks great awesome job.

Can't wait to see V2 at work 👀

One of the better impression videos i've sen in a while, Thx man take care

This would look killer in the formula light cars

Very interesting wheel rim yo got there sir i like it💪

So, for an F1 setup in an F1 playest should I go for these that will cost 500 bucks with delivery or HE sprints for 585? Trying to get the most authentic F1 feel

This is amazing

Buen trabajo amigo /// congrats and thanks for build and share !!!!

Congratulations! You run a fantastic channel and I believe many more subscribers shall come :D

Did you use a 3D printer to make the housing?

Thanks for the video. A short, informative bit about the stuff I need to know to get this thing started.

im glad i have found this channel. awesome content

underrated channel.

New fan. Just getting into Sim Racing, current PC hardware enthusiast. Learning to DIY. Maybe I'll pick a wheel and have you build it. :) Or maybe I'll start a KZfaq channel and try to replicate your success. Keep at it!

will sub now enter the next one, as i am new and will be unfair to the first 2k subs

Congrats on reaching 2k Ray 🎉🎉

Hey Bro, Nice too See you

Fun to watch. How populated are the splits for this series?

👍

Very nice video thanks for that - try to build the same for me. question where i can buy this 4" vocore screen? can you give me a tip?

1:00 bro im going to need that light cycle. if youre on discord let me know i have 5 PE wheels (LMP Pro, GTE v2, HYP-R, FGT and GTB Pro) and i think this GTB Pro is one of the best designed he has come up with. im curious how he will top this

I changed my mind. I want it now Ray. LOL

where can I get that led profile? looks awesome

I built one yesterday as well. Nice little gadget to have.

very cool.

Thank you for the review. Time for me to make the jump to this bad boy of a shifter.

Awesome build. How does this mount to the rig?

Another gem of build… I picked up something similar a while back and it’s been a great addition to the rig.

Whyyyy? Why did I lose it live?!? Thanks for the work, mate. I love this diy!

Thanks for everything you’re doing for a lot of us in the sim racing community. Keep up the good work and I’ll definitely build this one too

Man all this new 3d printing stuff for sim racing is awesome! You're doing a great job!

Great video! QQ how do you implement the Dan susuki QR solution using a moza QR? do you also have it connected to a moza base? I just did my first DIY build (the pokornyi GTE PRO V1 BIG BOY) and i was looking into using the QR from Dan but this is my main blocker.

I cant configure any Buttons of my Moza Truck Wheel. In the pit house Software the Status is disconnected. In Euro Truck Simulator 2 works the wheel perfect with force Feedback with R9 Base. But how can i configure the buttons?

My cm display cuts out when turning sometimes

Hi Grayze, I have some questions for you, how can I contact you on discord? you once proposed that if I wanted you could build me a steering wheel, so I would like to ask you a few things. Thanks

M8 you have to do a review on the Simagic GT Neo

That downshifting was amazing

Well I saw those Hub sleeves came in on the VRS website, so I ordered one of those along with the ole VRS Pro! It was also cool of VRS to just send me another Break USB Bus box to decide what I want to do! I figured it out and it loaded nice. I also ordered that USB brand HUB you recommended to me. That ill be for my wheel of choice and the ability to plug in a cool external; device like a button box as I also like GT I want to land me a cool wheel RIM before this years election in the event product availability gets hung up from another shit surprise. I currently use a ASR4 chassis. I ordered this cool ARS mount that will mount form the face a Sim Magic, Simucube or the VRS. I like the simplicity of the VRS. It's also a Mean Well power supply but custom and well thought out! I actually need the longer cable length as the front of my chassis actually rolls up under a desk. A work in progress! Putting together one piece at a time. And my GT-DD pro is nothing to shake a stick at either! It's nice. My smaller 1st Fanatec gear I landed is keeper. I really believe that this stuff can disappear and fall over with what can happen.

Do they work with MOZA? if I change in my base too?

Hello sir. Looking at that shifter plate. Where did you get that? With the clutch availability.

So.... one thing to ponder or share here. I do currently have the VRS full pedal set as I recently added the clutch. I'll end up using it but want to end up with a cool shifter. So....when I first received my VRS Break and Gas pedal, cause that's what I started off with only needing, I quickly learned that there are no instructions, and I had to figure it's complete mechanical application design sort of by myself. I was informed by VRS that there were videos on KZfaq. I didn't like this. But adapted. I also discovered that my clevis clip on my break pedal was in assembled upside down and backwards. I was missing the RED break spring pedal too. I was also wondering why my gas pedal was weird and from watching the video I was missing a small 5 cent nut. I went to the hardware store and got the small nut and a washer too cause that would be cleaner in application. The reps name with VRS I won't mention cause he was very nice and sent me a RED spring immediately. When I first plugged in that USB VRS connection box my pilot light stayed on all the time. VRS informed me that was normal. Not a problem. After some time passed I ended up updating my firmware, when I added the clutch. I also still enquired to VRS regarding the LED light no longer working. So they said, let us send you another box and switch it out. Can't ask for more than that.... ok, thanx!... So I received the box yesterday, pull out my chassis, switch it out real quick. No LED light. When I try to open it, I get a red box across the VRS firmware, "Update needed" It states I need 1.12 ok" But it will not update. I look on discord and cannot fine the latest update. I fond a VRS page through search and it's latest was 1.11. The VRS website only let me download what I already seem to be with firmware wise..... So I switch my original box back. It opens up fine. I select update and it states I currently have the latest 1.12 update and my old box works fine. Originally too when I politely complained to VRS regarding how I wasn't impressed with the pedals with no instructions or parts missing, product not assembled correctly??!! and I learn it by watching a video? Nothing was damaged at all. Not a scratch. My answer from VRS was that they are a more simple company or something to this degree and this was why they could offer us a more affordable price. So...what ever that's worth. But I soon learned too that how I calibrate the pedals made a big difference , setting the pedals up properly to my muscle reactions made a hugh good difference. There are cool abilities like adjusting my gas pedal tension, break tension and how hard I apply the break for a action needed based on my style of how I move. So I ended up really liking these pedals, except for this driver BS and being on my own. Any wrong or defective situation was handled by VRS immediately and in an instant. But I'm gonna look now real closely at discord regarding VRS's Wheel base to see how new customers receive it within the box, any issues , missing items non working items...etc.... I still just might jump to a simcicube as I don't want problems based on economics plus the Simucube is a tad more powerful, larger? SC 2 Pro? So down lower maybe at the end of the day more responsive. This shit confuses me to be honest.

Oh wow how did I not see your live session 😆