Warms my heart when mechanical advantage is maximized.
@helpful55395 күн бұрын
nice
@jackmeyermakes4 күн бұрын
Thanks for watching
@eugenemott51167 күн бұрын
Make a guy fire 🔥🔥
@drgta611 күн бұрын
I made a similar table too. It's heavy though.
@jackmeyermakes9 күн бұрын
Good stuff. These tables definitely won’t blow away on you
@abcxyz302816 күн бұрын
I didn't realised the roots are deep and still sturdy even when dead. Going to sort mine out hopefully this summer after 5 years on and off 😅
@jackmeyermakes15 күн бұрын
always amazes me how strong just one root is. Good luck
@BrianLaBroi17 күн бұрын
Plans were excellent and easy to follow.
@jackmeyermakes15 күн бұрын
Thank you I am glad they were helpful
@AtlantisIndigo17 күн бұрын
My friend suggested a wench for me to remove mine which is already loose and I can get movement with a shovel but I don't have a tow hitch on my suv to give it just that yank it needs. I Googled wench & found your video! I think this is exactly what I'm going to do. I've aldwssy dug around it on 3 of the sides. So thank you for this helpful video
@jackmeyermakes17 күн бұрын
Good luck hopefully it pops out easily for you
@amac32097417 күн бұрын
Much more fun if you pull it out using a truck 😂
@jackmeyermakes17 күн бұрын
Yes indeed. Need to get me one of those
@bcr8tve18 күн бұрын
Nice consistent color on the strip lighting. Great job concealing wires. Was this with remote or dimmable driver and wall switch?
@jackmeyermakes17 күн бұрын
Thank you. I had the lights wires in to the same switch as the overhead lights. There is a dimmer tucked on the side I can adjust the brightness with
@mikedunn779518 күн бұрын
Nice! I used a pressure washer to expose the roots on a stump I was pulling. It was smaller than yours,though.
@jackmeyermakes17 күн бұрын
There have been a lot of suggestions to use a pressure washer I’ll give that a shot next time
@trahuynh_usa19 күн бұрын
Nice work
@jackmeyermakes17 күн бұрын
Thanks for watching
@southparklion20 күн бұрын
What about running the strap around the stump and then over a tire to get an upwards force vector?
@jackmeyermakes17 күн бұрын
I’ve seen some videos of people using tires, it seems like a cool idea to try and could go faster
@user-gq5mf6yj6i21 күн бұрын
The real trick is don't cut the tree that low, cut 6 feet up then cut roots then rap cable and pull over with the leverage of tree and it fall over easier and you can cut roots as you pull over.
@jackmeyermakes20 күн бұрын
I agree. I could have done this in a fraction of the time if an 6ft stump was left but the tree was cut years before I moved in
@mikeeccle444722 күн бұрын
looks like a serious bitch good work
@robertpaget80923 күн бұрын
Mines all three of those stumps and then some so as nice as this method is ,I can’t waste the money to find out
@namtran-pe6sc25 күн бұрын
Strong back, weak mind.
@jackmeyermakes24 күн бұрын
What approach do you recommend?
@user-ty1hq1lw5o25 күн бұрын
nice work. I tried to duplicate ur style but so far no luck. I'm trying to straighten up a leaned mango tree. looks like it should require 20k/lb of pull. tried multiple options but so far no luck
@ralphallen248726 күн бұрын
make a chest table with the stumps
@jackmeyermakes24 күн бұрын
good suggestion
@leahcimwerdna520926 күн бұрын
Shouldnt have cut it so low would jave been easier to get out
@jackmeyermakes24 күн бұрын
agreed longer lever means more leverage. The tree was cut before I moved in so had to work with what was there
@leahcimwerdna520924 күн бұрын
@@jackmeyermakes lol then I'm speaking from the same angle, lol had a buddy needed help getting the stump out and it was cut almost flush to the ground....the most unnecessary digging happened that day.
@mikey92362Ай бұрын
The reposition for upward force was pretty smart! I'm sure I'm gonna use that idea at some point. I use an old truck wheel for the same sort of effect when stumps are short. You can also wrap chain around the stump and use a recovery strap between the chain and wench. Leave tension on it overnight amd just start a small fire under the base where the roots are. It should slowly pull up as it smoulders. The recovery strap will just keep on pulling as the stump moves. Make sure the area has nothing flammable and soak it down. And put a fire ring or bricks Around it just to be safe.
@diegomarxweiller1814Ай бұрын
Overkill as f use 2 trucker knots and ur set lol
@michaelallison1255Ай бұрын
my hat is off to you-my back would have lasted about 20 minutes!
@jackmeyermakesАй бұрын
Thanks for watching 👍
@judsonbrant1736Ай бұрын
Ok, I am going to be that guy. Pullies will only double your power if you double the amount of line pulled on that line vs object moved. Hooking your winch to the outside of a snatchblock will only pull with the power of the winch. Hooking a winch to the line inside the snatchblock would give you more power as the line would move 2X the cable vs object moved.
@haciendadadАй бұрын
If you left a taller stump, you would have got more leverage too. Otherwise, great idea!
@jackmeyermakesАй бұрын
Agreed the taller the stump the easier it is. These were cut years before I moved in
@lockejohn18Ай бұрын
Why not just wedge it. Less equipment needed for sure and faster.
@jackmeyermakesАй бұрын
I am saving the stump to make a piece of furniture
@wfobaby9116Ай бұрын
Can’t believe your this smart and bought a come along from Harbor Freight.
@jackmeyermakesАй бұрын
It survived this job but if I had been willing to spend more than $25 it probably would have gone faster
@AHeuvelman-su8jiАй бұрын
Het zijn niet echt groene stompen, dus erg opzienbarend is het niet.
@jackmeyermakesАй бұрын
Yea these were cut down at least 5 years ago
@chasefoster3972Ай бұрын
You can rent a stump grinder for $125
@jackmeyermakesАй бұрын
I’m saving the stump to make something
@bellinghamfpvАй бұрын
A five foot mental breaker bar is my go to.
@jackmeyermakesАй бұрын
That’d be useful for sure
@EricOnYouTubeАй бұрын
Wow, well done.
@jackmeyermakesАй бұрын
Thanks for watching
@tren380Ай бұрын
How are those steel toe boots doing when chopping towards your feet? Oh wait you don’t have steel toe boots on. Nice.
@jackmeyermakesАй бұрын
I kept a distance between root and boot that was well within me and my 10 toes' risk tolerance.
@bjorn_morenАй бұрын
I've removed a lot of large stumps on my property, but given how labor intensive it still is I can't say I've found an optimal way yet. Right when the tree is felled I try to cut away as much of the top as possible, ideally I level it with the ground. Then it takes around four years for nature to take its course and rot away most of the smaller roots, which will make it easier to pull out the larger roots later. At that time I dig out as much soil as possible around and below the stump with a hoe, takes about an hour. Then I take a chain saw and cut vertically into the stump to split it into four or more parts, as far down as I dare to go. This quickly wears out the chain, no way to avoid it. Then I take a large iron to break the stump apart with sheer force. I also use a sledge hammer to bash the various parts of the stump and roots. Takes around two hours to remove a stump. I've seen various clever tricks to remove stumps, but in my experience there is no easy way if you don't have access to machinery.
@jackmeyermakesАй бұрын
That's a great way to do it
@FaceYourFear.Ай бұрын
I guess it gets the job done but This was kinda hard to watch. I’ve done bigger tree roots with just a shovel and an axe and some kicks in less time.
@jackmeyermakesАй бұрын
It sounds like you are really proud of that, that’s great for you
@markproulx1472Ай бұрын
Shoveling away the soil. How cute. Around here, that’s a job for dynamite.
@jackmeyermakesАй бұрын
Boom!
@WILLIAMMORALES-gw1zzАй бұрын
Nice video, great idea on the top.
@jackmeyermakesАй бұрын
Thank you William
@WILLIAMMORALES-gw1zzАй бұрын
i used a sawzaw as well to cut the roots, then got 2 2x4 together and screwed then with 2 large large bolts to the trunk, then I used a floor jack under the boards to raise, then repeat on the other side etc. I'm sure there a million ways to skin this cat. It just thats all I had at my disposal in my back yard and no trees to winch from.
@jackmeyermakesАй бұрын
I’d like to give your method a shot some day
@fergusxАй бұрын
Thanks for the lesson I have a good few of those to do.
@jackmeyermakesАй бұрын
Good luck
@UncleMiltyАй бұрын
Such a great feeling when it finally comes out! Swinging an axe is hard (for me) have found it easier to use a reciprocating saw on all the roots. Still a hard job.
@jackmeyermakesАй бұрын
I like the workout but reciprocating saw is great too
@andrewbauer3792Ай бұрын
I'm more impressed that you used a come-a-long for the project. I hate those things! Great job!
@jackmeyermakesАй бұрын
This one was from harbor freight (got what I paid for). Thanks for watching
@leebennett367229 күн бұрын
I have a 1.5 ton tirfor tried it the other day it's amazing.got it used .for a great price .I used to have the puller you have but the cable got too tightly wrapped .The tirfor cable passes right through the body .well done for getting them out .👍
@cbdynaАй бұрын
Good job. I have a big one that will need to come out soon, but going to leave the center section once below grade.
@jackmeyermakesАй бұрын
Good luck
@puwazatzaАй бұрын
this video makes me send respect to all dentists who fight wisdom teeth.
@Mr_FahrenheitАй бұрын
So you cut the stump out you didn’t pull the stump out ( click bait )
@jackmeyermakesАй бұрын
You got me
@Jay-yy9olАй бұрын
Hi. You can damage the bark of you second tree. If bark is removed 180 degrees around, your tree will die over time as it’s water circulatory system is cut off. Thanks.
@jackmeyermakesАй бұрын
Valid point. I used a 4 inch wide strap around the anchor trees, no damage done
@eljolcal1Ай бұрын
What changes would I have to make if I wanted to use a wood top? Also what kind of wood did you use?
@jackmeyermakesАй бұрын
I used trex which is a composite wood usually used on decks. The middle boards have grooves on the edges that let me use hidden fasteners. Only change need if you are using real wood is that likely your only option for securing all the boards would be to screw down from the top.
@kimhorton526Ай бұрын
As someone who is researching using Trex deck boards to replace my wood tabletop, I can tell you DO NOT screw the wood boards down to the tabletop. This prevents the boards from being able to move (as they will naturally swell and contract over time). This will cause your boards to crack and you'll end up having to replace them (as I am now having to do!). I used 2x8 boards on my original table, which was very sturd, but made the table very heavy to move, if needed. I was considering using 1x8s this time to lighten the load, but would likely cause more warping than the 2x8s. Hence, here I am looking at composite decking boards.
@jteglandАй бұрын
A small bag of charcoal and some patience can make your stumps disappear with very low effort.
@jackmeyermakesАй бұрын
I wanted to preserve the stumps for some furniture projects but agreed burning is much easier on the back
@russk5513Ай бұрын
Lastly, if you know you're going to remove some trees always leave a 4-foot Tall part of the stump. Do not cut it down to the bottom because you can use the leverage of the 4 ft to help break it out of the ground applying pulling chains to the other trees not yet removed. Take advantage of your existing objects/things around you to assist in efforts and with a little bit of pre-planning and leverage removing the tree stumps without mechanization.
@jackmeyermakesАй бұрын
These were cut before I moved in but completely agree the more leverage the better
@mikey92362Ай бұрын
Use the truck wheel trick when stumps are too short.
@user-xn6tk5wm5iАй бұрын
Several comments regarding wasted time and money. Likely you have less invested than a month of gym membership, you get to keep the stump and tools, and I would bet your body fat percentage and strength would beat any of theirs, Keep it up, there is value in hard work.
@turyjordan3827Ай бұрын
Make toothpicks
@jackmeyermakesАй бұрын
Lifetime supply
@grahamhall2662Ай бұрын
Nice one. Hard work but you got there succesfully, well done.