Nippon Mysterious (8151) & Bluebell White (8159), hope this well and please subscribe 😁🙏🏻
@billadam999714 күн бұрын
I still cannot figure out how to download photos and videos from my HOVER to my iPhone HELP
@francisseow851015 күн бұрын
Hey bro, How do you adjust the flight distance limit?
@alangadgets15 күн бұрын
Go under Settings > Safety > Max Flight Distance. Hope it helps and pls sub 🙏🏻😁
@whatelsewouldyoudo16 күн бұрын
THANK YOU! I was freaking out because I couldn't put it back. So I accidentally locked it. lol
@alangadgets16 күн бұрын
I'm so glad my video helped, please subscribe 😁🙏🏻
@M2008tw19 күн бұрын
I didn't expect Uncle Roger to sit and talk about FPV drones... 🙃
@PhilTParker22 күн бұрын
Looks like we like the same toys. I need to bring my Hover along with me this weekend!
@BYKILL18727 күн бұрын
bonsoir moi quand je connecte le wifi u-clock je n'ai pas l’application ulanzi comment fait vous pour l'avoir si non je ne peux pas régler l'horloge
@alangadgets27 күн бұрын
After connecting directly to the pixel clock, open a web browser and go to the default IP address 192.168.4.1 and you should see the clock interface. Please subscribe 🙏🏻😄
@saysoptimus9884Ай бұрын
Ссылку можно для покупки?
@alangadgetsАй бұрын
Here you go, please subscribe! 😀 From Ulanzi: www.ulanzi.com/products/falcam-f22-gopro-mount-to-dji-action-mount-magnetic-base-3235?aff=468 From AliExpress: s.click.aliexpress.com/e/_DkTKP7v
@saysoptimus9884Ай бұрын
@@alangadgets ok thanks 👍😄
@AIAlchemyxАй бұрын
is there any way to fly the drone slower ???
@alangadgetsАй бұрын
unfortunately, this drone is far from sophisticated and offers no way to tune the ratings...
@ilink06Ай бұрын
didn't you fly manual all along?
@alangadgetsАй бұрын
This was quite a while back when I started learning
@DragoLogoАй бұрын
Awesome
@TriviaQuizRushАй бұрын
Please tell me how your sub-counter is showing 1010?! I have the Ulanzi Smart Pixel Clock and I use it ONLY as a KZfaq subscription counter. However it's not counting subscribers above 1000. I currently have over 1000 subs and it keeps showing 1000. How do you fix this? Is your YT counter one through AWTRIX? Because I really hate running a server 24/7 just to have my subs above 1k shown correctly....
@alangadgetsАй бұрын
I'm also using it mainly to show my KZfaq subscriber count. KZfaq only shows the rounded down value after 1000, so anything from 1000 to 1009 will be shown as 1000, 1010 to 1019 will be shown as 1010 etc.. only going to your KZfaq studio dashboard will show the exact count. The awtrix code is definitely using a different code but like you I don't want to run a server just for that
@TRENDIEOFICIALАй бұрын
I would apreciate if you made an updated tutorial with Awtrix 3. I tried installing it my own, and i never achieved to install apps. I tried installing awtrix 2 with your tutorial and worked, flawlesly, but its outdated.
@alangadgetsАй бұрын
Thanks, I'll look into it asap, kinda busy with other projects at the moment
@MrVnsntyАй бұрын
God bless🎉
@alangadgetsАй бұрын
Pls sub 😊
@rurouni168Ай бұрын
Does it enhance google view only or the output video already? Thanks
@alangadgetsАй бұрын
This only enhanced the goggles view. Pls sub 🙏🏻
@cadydaАй бұрын
Thank you Alan.
@alangadgetsАй бұрын
You're so welcome, pls sub 🙏🏻
@DangasAАй бұрын
how did you downloaded video with dji google telemetry ?
@alangadgetsАй бұрын
under the Advanced Camera Settings, select Record With Both, and enable Camera View Recording. pls sub if this is helpful, thanks! 😀
@coalhouse31712 ай бұрын
singapore accent !! is it near Yo chu kang?
@alangadgets2 ай бұрын
Yup Singaporeans here! This was at bishan park. Pls sub! 🙏🏻😁
@JoeSmithNBCPalmSpringsToday2 ай бұрын
Alan...thank you. It worked. Is there a way to remap the controls so it acts more like a DJI controller?
@alangadgets2 ай бұрын
Unfortunately, you can't. This felt more like an afterthought than a useful feature. Glad the video was helpful, pls sub if you haven't already 😊🙏🏻
@ilink062 ай бұрын
Errrr, how about the flying time for each battery?
@alangadgets2 ай бұрын
9-10 mins on the average
@billyroberts26002 ай бұрын
Didn't work for me, I didn't try flying it I just tried the shoot button which did work but the gimbal button didn't work
@alangadgets2 ай бұрын
This really felt like an afterthought more than a useful feature. Sorry it didn't work out for you
@alehiasАй бұрын
@@alangadgets i have the same issue, do you know any way to solve? the control pairs ok, and if i go to whatsapp i can use all the buttons, but in the hover app only works the shoot picture buton, is that because the keyboard language? because i have it on english US... thanks for your content!
@alangadgetsАй бұрын
@@alehias I set my phone to English (Singapore) and it worked, I don't think region matters as long as it's English. Have you tried forgetting the Bluetooth and pair them again? It's hard to troubleshoot without your devices with me 😅 pls sub if you haven't already 😊
thanks, that meant a lot! I've subbed to yours as well! Niagara Falls from the US side is as close as I've ever been to Canada... hope to visit someday!
@pandacheng43102 ай бұрын
I am using the micro version. I works yesterday but not work today. However it showed connected on the screen.
@alangadgets2 ай бұрын
Try to Forget the device via the connected Bluetooth list and pair it again. Bluetooth devices have such issues all the time, it's quite common even for big names like Nikon remotes. Hope this helps, pls sub 🙏🏻😁
@TWINKLESTAR_laxm1narayan2 ай бұрын
Thanks bro I searching this trick how to remove cover for using DJI mic 2 receiver in my osmo Action 4… and now I found through you ❤❤❤❤
@alangadgets2 ай бұрын
Always happy to help, please subscribe 🙏🏻😄
@johnlenardbolivar26042 ай бұрын
Can you use the manual control over water?
@alangadgets2 ай бұрын
Yes but not recommended, it would not hold position while hovering
@HolyAsgard19852 ай бұрын
Why shout i use a Awtrix Display and not a Tablet ? Whats the Diffenz from Energy Using ?
@alangadgets2 ай бұрын
I think the form factor says it all. there's no right or wrong, just which you prefer. I don't even find a need to own a tablet so a clock like this would be a cheaper alternative
@kellogsfrosties13472 ай бұрын
Hi! I will be in SG by May. Any suggestions on where to fly the Avata 2?
@alangadgets2 ай бұрын
Marina Barrage area is the best to do that. drop me an email at [email protected] and I can show you more on google maps
Found some news on the backward compatibility here, good news? www.reddit.com/r/dji/comments/1c1hj3o/is_the_avata_2_compatible_with_the_googles/
@MrJosephasmith3 ай бұрын
Thank you. I'm going to try it.
@alangadgets3 ай бұрын
Welcome, I hope it helps! Pls sub 🙏🏻
@somchaidiy56633 ай бұрын
thank you very much
@alangadgets3 ай бұрын
I'm glad! Pls sub 🙏🏻
@abricot683 ай бұрын
Not interesting to pair a remote 😊
@alangadgets3 ай бұрын
Ya it's a chore.. lol
@worldoftony4693 ай бұрын
Very helpful thank you so much!
@alangadgets3 ай бұрын
I'm glad! Pls sub 🙏🏻
@worldoftony4693 ай бұрын
Just subbed
@AdrianoBortoleto3 ай бұрын
Great video... i am having a few issues, firstly I had to use another port, cuz 7001 was been used by something else, so I changed to port 7002 and I could open the AWTRIX 3 web console... but it's still not connecting to the clock... so i still getting this error message: Matrix is not connected Please make sure that the matrix is turned on and can connect to the Host. Then try again hitting Settings, I have on matrix config, WIFI and USB, so it's seems that it's not connecting to the clock by wifi, but if i try to connect by cable, on select port i have only "none" (I am using apple original cable) Any tip my friend? Thank you
@alangadgets3 ай бұрын
USB never worked for me as well. You need 2 ports, ControllerPort and WebserverPort as shown in 1:45, make sure those 2 ports are available and whitelisted in your firewall
@MysticNessly3 ай бұрын
Looks awesome, clean look!
@alangadgets3 ай бұрын
Thanks! Pls sub 🙏🏻
@voederbietels3 ай бұрын
in P mode holy grail in daylight al good but when it gets darker everything went overexposed and also unwanted speed change in de footage so the timelaps is ruined
@alangadgets3 ай бұрын
2:45 did you set the minimum shutter speed to be lower than your interval? You may also try setting a lower ISO ceiling. I can't say for sure what really happened but no speed change ruined any of my shots yet
@voederbietels3 ай бұрын
@@alangadgets hi Alan in P mode you have no control at the shutterspeed if i correct also everything gets over exposed when it is getting dark. In P mode . it wil not getting dark it is is al way to bright . i try for almost a year now but with no luck tons of YT turials but most missing the details
@alangadgets3 ай бұрын
@@voederbietels for Nikon you can set the lowest shutter speed it's allowed to go so that it won't go lower than the interval, not sure about other camera. Sorry that it did work for you 🙏🏻
@voederbietels3 ай бұрын
@@alangadgets I have the Nikon z62 .Are you shure you can set that in P mode ? if i try it dont change becouse i am in p mode or do you set interval priority to on? In what mode you are working that you can lock the interval or where can i find this settings ?
@alangadgets3 ай бұрын
@@voederbietels the minimum shutter speed is set at the ISO setting after you turned on the auto ISO as shown at 2:45, regardless of interval priority setting
@betaodrone3 ай бұрын
TOP
@firstlast-pt5pp4 ай бұрын
@5:26 - the preview/live screen also shows you over exposed areas in the image
@W00DMAST3R4 ай бұрын
Hi, I have a Z5 and the timelapse Mode is unavailable in P-Mode for some reason. I know that it is possible and I've done already in the past with your tutorial, but I keep forgetting which setting I have to switch to make it available again.
@alangadgets4 ай бұрын
Time lapse movie is only available in Photo mode and not video mode. Hope that helps. Please subscribe if you haven't already 😊
@ArmandSalmon4 ай бұрын
Thank you. Super helpful
@alangadgets4 ай бұрын
Thanks! Please subscribe 🙏🏻
@pumukivlogs4 ай бұрын
how i can connect the clock for first time please u mention a link but is not link
@alangadgets4 ай бұрын
oops sorry, here you go, pls sub 😁.. kzfaq.info/get/bejne/hc9daKiSt9Oqkn0.html
@pumukivlogs3 ай бұрын
@@alangadgets thank you
@Wvk5zc4 ай бұрын
how's the size comparison?
@alangadgets4 ай бұрын
They are very similar in size, almost identical
@natsunwtk4 ай бұрын
How to pull the cover off and put it back on nicely?
@alangadgets4 ай бұрын
I just did a video on this, do check it out and subscribe 😄 kzfaq.info/get/bejne/r6mmqrOktN2-o4U.htmlsi=0HEGZFHN1ACYQhzT
@countbaker55954 ай бұрын
Does the Creative have the UI BEEP when you press volume+/- / play/pause like the shokz? The beep on shokz is unbearable when I use earplugs. Now I'm looking for a replacement.
@alangadgets4 ай бұрын
Nope, there is no beep sound on the creative
@fondoo4 ай бұрын
I purchased your Ulanzi desktop clock TC001 and was able to set it up successfully.I have the youtube fans enabled with my UID and API key setup. I have 1888 subscribers now but the youtube fans is displaying 1880. Any update why its not updating?
@alangadgets4 ай бұрын
the KZfaq API only returns the number rounded down to the nearest tenth, so anything from 1880 to 1889 will only show as 1880. notice that it only shows 1.88k visitors on your page. please sub if you find the video helpful :)
@adambudai33355 ай бұрын
Please help me find the Budapest weather code?
@Mr_Web5 ай бұрын
How do you connect a power bank once the DJI mic is plugged in?
@alangadgets5 ай бұрын
I don't think you can connect a power bank with the mic plugged in
@GeneralLust5 ай бұрын
My Openrun Pro is dead and checking other products. I guess I have to stick to Shokz. Shokz really is really good. All Earbuds just hate me, and I hate them, too.
@alangadgets5 ай бұрын
Sorry to hear that, my wife and I too dislike ear buds..
@tloz045 ай бұрын
Hey mate, can you elaborate the process to compile the app in android studio? I tried but always get a error
@alangadgets5 ай бұрын
i used a much older version of Android Studio, some dependencies or versions might need to be updated. maybe you could send me the error message to [email protected] for me to take a look.