You are the man! Thank you! These tops have been a mystery for years.

😮😮😮Hello my friend from Austria...

I used leds to replace my running lights. Now when I use my turn signal the break light blinks with it. The dash says "check rear signal bulb". Wth?

Good luck to anybody trying to get these steps now. GM is so backordered that they won't even take new orders

do i need to drain anything before doing this

Hey there, since you seem to be an expert on the 458, could I ask if you know about this code: B1004, Super lift Failure (AUTEL ELITE SCANNER)? The car is having problems with the lift, and the suspension is occasionally becoming excessively stiff, even in Manettino Comfort Mode. It's a 2012 458 Italia with only 13,000 miles on the odometer. Thanks!

Hey I am at the dealership now working my deal and got the steps included for a truck that did not have. But they can’t find them in the parts catalog. Where did you get yours

👍 nice

Thank you for the video! Needed to know how to pull the A pillar trim off my car without damaging it !!

Will this work on older 360's, such as the 2001 model year? Also, can I bleed the clutch using this tool?

I was wondering why a Canyon appeared different from my Colorado. Thx!

It is my cars

New Talent...Selling cars. A sound comparison and drive comparison would be a subject for a new vid. Very thorough explanatons.

nice organized work with that complex assembly. Sad that you'll have to repeat it when the missing part shows up. Wish we'd known that earlier.

Awesome that you got it all together and working again. I know it was a nightmare.

hai acquistato un pacchetto a pagamento ? o pure hai messo solo il vin e ha fatto tutto lui senza comprare nulla ?

ciao la tua auto che anno é ?

Do you have a video where you replace the upper and lower oil pan gasket?

ho un problema ho un launch ufficiale 431 ma non mi fa entrare nel cambio , avendo pacchetto ferrari .. mi puoi aiutare ? ho provato anche con thinkdiag e non entra nemmeno ... cosa posso fare ? sto impazzendo

I had the Truxedo LO Pro Tonneau its the best manufacture .

Thank you my man! Great Video

If your vehicle doesn't have the ok button on the steering wheel,push the button on your trun signal lever. This is the ok button on models like that

Love it. Was the light sabre sound a reference to darth vader?

Those aftermarket wind stops are awful. If you're going to go through all the trouble of replacing the wind stops, get the OEM units. They're about three times as expensive but they look right. It's better to simply remove the bad ones than replace them with substandard and ugly after market units. That's my opinion anyway.

I’m first

Would putting some oil in oil filter before installing be good idea or bad?

Could u please illustrate to me how i change the Ferrari California t 2016 external mirror switch ?

PERFECTO.. .FROM AUSTRIA ...

How much corn the combine holds?, why does the combine does not cut the same plot after finishing it finish the road?.

Thanks for clarifying which banks are which. But would you know which vanos is the exhaust/intake. I need to clean out (VANOS exhaust 2)

O-ring and a crush washers on the drain plug? I've never seen that before. The crush washer should be enough. Help me out, if I'm wrong here

Thank you for always posting useful videos. I wanted to purchase the Maddox MH 1B introduced this time, so I looked on the site, but it wasn't for sale. I'm from Japan.

$4k for headlight assembly ? what is the car worth ?

Thanks!

Jeff - what was it like to fit this one.

Any aftermarket, or engineering solutions for the leaky roof on a rainy day 🤔,..... cheers,.

so upset that they changed the display on the 2024 and we can not get the duel on the 23

A. SUPER. AWESOME. VIDEO. TNKS. SIR👍👍👍👍👍👍👍👍👍👍

I was speaking with a guy works in the parts department at the local Ferrari dealership here when I went to get DCT fluid. He asked if I were changing my DCT fluid myself. I said yes. Then he said "I can’t remember if you need to actuate any of the valves to properly flush it. DCT fluids have friction modifiers to keep the clutches cool engaging smoothly and reduce failure. You’ll want to make sure you remove any residue to prevent it from clogging anything within the system." I have seen no mention of actuating valves when changing the DCT fluid. Can you let me know if you did this or not or if you know if it needs to be done? Thanks.

😮😮😮Perfecto....

Is there any items left

👍

Can you help me please donu know how to lock the steering wheel while stop and on the parking area to make it secure thanks

Nice movies! Can you tell me what you use for intake and water manifold gaskets like the gasket maker?

Neat that they put GPS tracking in them now. Wish the one they had included had that. I may convert it to that too sometime.

Hey, brother, thanks for the video. Just wandering if things move around while driving in the bed? The mat does't look like it's rubbery like say the type made by like Husky, which they don't have one for this truck yet, and I'm concerned with things sliding around! Thanks!

i have all the screws out but the left side of the dash is stuck on something (drivers side corner against the window and wondering if there was something else here? removing from a parts car

What are the Torque specs for the two caliper bolts?

Wao👍

I don't understand😅 what's the point of this viper?