Tuviste suerte en la reparación Un saludo desde Madrid

I've learnt alot from your video, thanks! I'm trying to fix a sony slv-f990 which has a similar power board to yours with the metal can although the big 400V cap is inside the can unlike yours so you have to keep opening up the can to test it. I think the metal tabs around the can are part of the circuit too. But anyway, still haven't got mine working yet but I've changed all the caps on the secondary and I'm about to do the same with the caps inside the can although I'm going to leave the 400V one for now.

Thks you show me how to see my ps3 errors. It is in the shop geting repered. Thks for this video

Awesome video an repair man. That's exactly what mines doing. Where can I get the mosfets ? Best Regards

love your video thank you. can you give a suggestion what to use to clean the plastic piece overtop of the led readout on the front? and a suggestion to remove light scratches on that plastic piece?

Any idea what it means when you are getting nothing on the inductors near the power header, have my multimeter set to diode tried multiple ground points etc... 12v rails all read correctly I'm very stumped trying to figure out beep on beep off a lot of interesting stuff going on including one diode getting nothing on one end as well and almost looks like a whole bank of caps having continuity on both sides to ground still trying to wrap my head all aorund this lol but figure it might be best to start with power in on

I just replaced to 220 capacitor. This did the trick for me. Guitar is syncing again. Thanks

Great video thanks. I've got a similar Sony (SLV E850) and the playback is wonderful. Unfortunately it's temperamental when ejecting and I have to stick my finger and help the tape out. I'm thinking the mechanism must be underneath since there's no signs of gears on the side, so at some point I'll have to take the mechanism out and have a look underneath. If you've done something similar before please let me know. cheers.

Thank you for this video. I had disassembled mine to some degree. Not as much as the one you had was. With your video I was able to reassemble mine and it’s working again.

I have a Sony MDS-101 the sled is not moving. I replaced the melted eject belt. I was told the original problem was disc read error.

Static electricity is more prevalent in dry not in moist climates. Unless air conditioning is used. Then could be a problem.

Please my soundbar ht-ct60bt sound just went off How do I fix it or is it condemned?

I have an Xbox one that shut down during gameplay and won't come back on. I ordered a power supply brick for it from Amazon. The light stays orange with a short flicker to yellow or green when I power on the Xbox but it immediately shuts back off and the light returns to orange. I have tried all the usual reset brick stuff as well. The Xbox will simply make the power on noise but won't come on. Did I get a faulty power supply from Amazon or is there something wrong in the mother board. I have also taken it apart and blew out all of the dust. I am somewhat savvy with electronics. I have some experience in soldiering and replacing components on circuit boards as well as computer experience and usually can fix anything myself. But I haven't been messing with Xbox since the 360 series and you seem to be experienced with them. I would love to hear your opinion on what you would suspect first and what steps to take in testing it? Thanks in advance. Hope to hear back soon!

Just got this exact model on freecycle with the same error code. Going to use this video as a guide! I’ve never changed capacitors before so fingers crossed! The deck came from a smoker’s house so it’s covered in tobacco stains 😢

You're my saviour! I've been trying to get mine working for ages. Lots of different causes can lead to this shut-down but mine was just a dirty LED.

Samsung 4k and QLED are notorious for screens failing Edge lit Samsungs are bad for cracking the first diffuser sheet it’s due to the heat of the backlight LEDs The diffuser is designed for one way only, pack out the dodgy tab bond with cardboard or a piece of rubber it will work ok 😊

Any ebay link for the gear ?

Thanks just what I was looking for

Thank you for this informative video. It helped me a lot !

than you

omg, you literally fast forward through the bit I could use help with

Bon Travaille

Hello mate, I was filming a video today and you came into my mind which I filmed a little bit about Noticed you’re not on Instagram anymore is everything good? Hope you’re well mate.

Hello can you fix my ps3 fat glod/green light of death ?

i have 2 of these M85 Kenwood, i've been buying them for years. i'd buy one, get bored, sell up, then miss it and buy another, i have the videos of them playing on my channel, i also i have my vintage boombox collection on there as well, i also have videos of my Amstrad HiFi's and the comment section is full of raging crazy people crying trying to tell me how crap they are, it's hilarious that a video of someone else's Amstrad HiFi playing can bother people so bad ha ha..

How to tell if it's the HDMI port or gpu cpu on 2500 b no the a/v didn't give picture either

I have one of those where the auto reverse is jammed 😭

Very pleased to see someone repairing retro equipment. I'm desperately trying to get hold of a minidisc player. Is it possible to play that type of minidisc in a Walkman?

I have spent two hours trying to get a Sony remote apart, there appears to be tiny screws five of them but no matter how hard I try to undo them I still can’t take it apart! I wonder whether it is worth it for so little reward!

You are brilliant.

Thanks for your video, I think I will buy an ESR meter to check caps in circuit, I think it is a good investment and saves time when you have boards with lots of caps.

Désolé mais le contre poids est monter à l'envers (roue dantee doit être à l'intérieur et non à l'extérieur). Bon travail.

Does the HD Converter box ignore Macrovision?

Hi. I have a Xbox on my bench with the exact behaviour. It plays on tone with light, hard drive spins, No fan and after some sec it plays the off tone and is off. And at the beginning it often plays the tone without light and after 3-4 times the light came up. It’s exactly as in the video. Does someone knows what is wrong here?

Hi, congratulations on your work, really nice. What type of electric motor is it? How many laps does he make?

Long shot but do you by any chance offer a service for repairs? I need exactly this

I must check that autoreturn rod, I might have put it someway wrong. Thanks alot, this video helps me to solve the problem.

Is there no light on the cartridge indicator? I just ordered the bulb specified on page 33 of the service manual. I am currently trying to find out how you change that particular bulb

Hi - I have the same mixer and last Saterday hi is blown up - smoke and dead. I found out that the SMD R59 and R59 looking black but I messured 21MOhm - ist this thrue? Beside that, one part is blown out and the leads are broken and the index is missing ;-/ now I don't no whitch part it is - on your video time 29:48 place right of your fingertip and down from R59/R58/R67/R68 what this is? I hope you can advise me whitch part I have to get THX

I have a Sharp MD-MS701 that works very well, but its case is badly worn. So I got a second player of the same type which is looking brand new. But with some discs it shows a UTOC Error. I tried several discs, TDK and Sony are working fine, but Maxell and BASF cannot be read. My old player is able to play all of the discs, so they are ok. So what could be the problem? If I had the same issue with this gear I think it should happen with all sort of discs and not only with a few. Any idea? (I did clean the lens with alcohol)

Well, since now video is OUTDATED, I'd like to remind you that you need to delid CELL/RSX and use UART USB and SYSCON to identify exact issue. Sinceresly yours, Captain Obvious.

Having trouble finding a belt for the door mechanism. Any intel on locating one?

Hi freind i have vertical blac line in qled samsung can you help me

Thank you! Dirty diodes for the win!

Can you please send me the information on the kit pack of battery connectors you bought from eBay I have a 4 battery AA connection for a R/C controller 🎮

I have same blue light isue and send it in two place for fix they didnt fix it say u its apu I was curisous did usb give power and its gone to white light now its working with the fan kik in high strayt away and some time power of fine some times beep 3 times qnd want power of i power it.off manualy did you find out enithing else on it i think its hard drive little bugie becouse its slowing down but that can be becouse straight overheating

Great video, really helped me, thank you

Can you use ethanol instead of IPA? Thank you

Hey, i dont have a soldering gun so is there any other way i can melt the led?

Thanks. I had the same problem where the tone arm was stuck. There was some awful noise lkee some kind of music heard. That was the only (big) minus in your video.