Oil is already going pass the MAF unless it's an older car. The crank case is vented in to the air intake. That is why people use catch cans.
@briangately21 сағат бұрын
What happens to your channel
@briangately21 сағат бұрын
What happen to your channel. U haven’t posted anything
@bane_armstrong2 күн бұрын
Great video, great presentation and beautiful C7!
@donaldbrown13002 күн бұрын
Love AWE! 😊
@Team5122 күн бұрын
Me too!
@terryrutherford21142 күн бұрын
I did the brake pads with the Z26 pads Friday 7/19/2024. I had to use a floor jack for each wheel as I don't have a lift. I also washed each wheel. It took me 2 hours and 45 minutes to complete. I hope my brake dust sorrows are behind me now. Thanks for the video. It was a pretty easy job.
@Team5122 күн бұрын
Nice work!
@cetriemmmmm71778 күн бұрын
My Fiesta ST 150 had a cracked intake tube on the original setup. The rest of the intake System is also an engine Cover, so it sits on top of the engine. It's restrictive by itself and this tube by itself costs around 300€. Insane. I bought an oiled cone filter and after 2000km after inspecting, the inside of the intake pipe was bone dry. No oil went inside. It was supposed to be lightly oiled, not soaked in oil. And it all costed a third of the price of the original part.
@mikecorlett13059 күн бұрын
What a fantastic video! Simple and educational. Also, kudos for linking the brake parts. I can't wait to get the parts and install them. Well done.
@Team5122 күн бұрын
Happy to help! Glad you found it useful.
@jamesfreebern806413 күн бұрын
Looks great and I will be installing.
@bill45colt13 күн бұрын
many thanks,,,i needed that baad
@devnull12816 күн бұрын
Sooooo, when are you coming back, Scott? This channel is too good for it to stay dormant!
@Team5122 күн бұрын
Thank so much! Any topics you’d like to see discussed?
@devnull1282 күн бұрын
@@Team512 - Hmmmm, update on you (hope all is well there of course), plans on the future, car update, then let's talk headers to go with your exhaust, them maybe heads/cam. Just the basics. :-)
@pbpyro5546Ай бұрын
My dream car
@arthurmroyceАй бұрын
I have used K&N filters for decades. I clean and re-oil them on a pretty aggressive schedule, but that is me. I have never had an issue with a MAF sensor because I actually followed the instructions and do not believe that more of something is better. The engineers who designed these products know more than I do so I defer to their wisdom. It works every time. I have never had an issue related to wear either. My understanding is the vibration of the engine optimizes the filtering of these filters.
@flcowboydcАй бұрын
Washing your hands and DO NOT get right in someone’s face you will not get the Flu aka C0VID.
@hungbeachbumАй бұрын
God what a ugly exhaust to start.🤮🤢
@user-or4tj3jt8iАй бұрын
You transpose the dextron fluid part number when you say it. The last two numbers are 34 not 43.
@SteveleanrАй бұрын
I got the AWE touring installed this past weekend, sounds fantastic! I do have a question, there is drone in the V4 mode, wondering if there is a way to keep it out of V4 mode.. Z mode doesn't keep it out of V4 mode as well.. otherwise this exhaust is the best i've heard!!
@robjordan204Ай бұрын
What up Scott, I gotta question, and I need an answer ASAP... Would a 2" Kooks Header match up with the AWE Xpipe. I've been told i NOW have to buy the actual Kooks Xpipe. Is there a way around this, Or am I gonna have to buy another Xpipe??? I don't wanna buy twice what I already have, Help me out Bruh...🫡
@Team512Ай бұрын
I think will probably need to get the matching xpipe. If you haven’t already, I would reach out to Kooks. BTW…there’s value in that AWE xpipe if it’s w/o cats.
@KrisWatts-sx2diАй бұрын
Great, informative video - well done! I’ve had my 2017 Z06 for about 3 months now so I’m still playing with my gauge preferences, so this was good. I tend to default to the Sport setting with the center speedometer, but like to play around with the settings.
@xlightfootx2 ай бұрын
Thank you from a trucker
@CanadianSpeedster2 ай бұрын
Any drone? I have the borla X-pipe. By far the best mod I’ve done. I could feel the better throttle response and power gain over stock. I think that’s where most of the power gain would come from between the x-pipe and axel back. I’m just curious how it will be paired with the AWE touring axel back for drone? Looking for a bit more sound but not too crazy…
@Team5122 ай бұрын
No drone on the touring. The track does drone tho. It’s been several years and I have both. Haven’t put the track back on because the touring sounds so good and does not drone.
@CanadianSpeedster2 ай бұрын
@@Team512good to hear there is no drone on the touring. Nothing worse that that. I had B&B bullet ob my C6Z06 and it was terrible for that lol.
@cablelag2 ай бұрын
No slip lock additive? If you reverse and hear clunking. It's just the clutch packs. Change your diff oil. (these cars are gettin 20 years old, change all fluids) Also Once the differential fluid has been changed, the vehicle must be driven in 8-10 tight figure eight maneuvers to heat the fluid and allow the fluid to be worked into the clutch plates.
@rpsservice2 ай бұрын
Hey guys can you put that wing on a c6 corvette.
@shatz722 ай бұрын
One of the best reviews on the AWE exhaust. I already have it on my Camaro ZL1!! I will be putting the AWE on my new eray!!!🎉. P.S - I totally agree on the chrome tips vs black. The chrome tips make a statement and tastefully stand out!!!
@gsteketee2 ай бұрын
Nice tip!!
@wdmeinert2 ай бұрын
How much lower do you sit in these seats vs stock?
@wdmeinert2 ай бұрын
How much lower do you sit in these seats vs stock?
@cn99362 ай бұрын
Great video! How are they holding up? I need to change my original Brembos and consider these. Thanks
@Team5122 күн бұрын
All good! Thanks for checking in.
@ImpalaSS082 ай бұрын
It’s paper vs oiled not dry vs oiled. Dry filters are different and where the industry has shifted more too.
@outdoorops53252 ай бұрын
looks the same but now needs an alignment
@KrisWatts-sx2di2 ай бұрын
Nice video - I’ve got a C7 Z06 I just bought and am looking to add an x-pipe. Keep up the good work, and I love that you include your daughter in the video - raising her up right!
@twinakafootwurk3 ай бұрын
Cool love the little one working on the C7 🏁
@robertfolgersr62803 ай бұрын
It looks like you are in Pa,? Would you like to work on my C6 installing the same parts?
@jeffreyhilton55733 ай бұрын
I know this is 4 years old, but it sure helped today. Before applying the power of persuasion, hammer, to the back of the pad, I thought it was best to consult the internet! On my first rear brake I had put the pad with the “squealer” on, on the inside and it wasn’t going in smoothly…Thank You for the video, it saved me from making a dumb mistake!
@Team5123 ай бұрын
Glad I could help!!!
@carzandchill69463 ай бұрын
Does every manual c7 even base have rev match?
@Team5123 ай бұрын
Yes
@michaelpizzimenti4653 ай бұрын
I’ve been debating on what brand exhaust to get after watching one of your other videos a week ago with your daughter installing that X pipe in the touring exhaust I like it so much. I immediately ordered that system. Can’t wait to put it on. Your videos are great. Look forward to seeing more.
@michaelpizzimenti4653 ай бұрын
AWE
@Chewie3743 ай бұрын
Probably 350 torque
@blackonepac3 ай бұрын
Thx alot gd info
@arthurmcglasson32023 ай бұрын
Oiled filters seem to let more dirt through in my experience.
@LewisGraybill3 ай бұрын
Love that sound.
@tomroy8163 ай бұрын
Stage 2 looks Nice
@chrisb_713 ай бұрын
Ok, now I'm sold! Except I'm going with the full Carbon Fiber 👍🏻.
@sarwarforiya0553 ай бұрын
Sir my car betryi cheng aftar screen not off
@hellomyfriend674 ай бұрын
Is the location any different for the 2010? I've had two places tell me they have to remove that leaf spring???
@mikeparsons7244 ай бұрын
Ok thanks for showing all your bs you gotta do to get a car in your garage. Show me you d*#@ too while your at it.10 minutes of crap before your get down to business. Never mind go somewhere else for info
@mikearthur79314 ай бұрын
What wheels are those?
@pdrgaming39364 ай бұрын
Hey can anyone answer this, can you combine the AWE touring exhaust with a borla x pipe?
@anthonylennear59814 ай бұрын
Nice video, I need you as a neighbor. I would like to lower my C7 Z06 finding a good shop to do this with after market bolts, priceless.