Hello! We are interested in what you have posted. We have some automotive related products. Do you accept sponsored products?
@Vickyvee9710 күн бұрын
What they never tell you that you is that you need to soak the bolts in penetration oil two days earlier and that you pray to the car gods for no bolt snap offs prior to removing them.
@breezybreeze427412 күн бұрын
How do you get that third nut off the top of the frame lmao
@mode1charlie17018 күн бұрын
Is it 2007-2020 or 2014-2021
@Aaron_DC421 күн бұрын
Thank you! Helped me a lot today!!! 🙏
@AlCapwn36921 күн бұрын
under-viewed and under-rated install video with clear angles and narration! Thanks.
@whatnow531321 күн бұрын
It look like there are only 2 bolts on the new bumper that bolt each side to the frame. Do the original side or end braces get reinstalled or are they eliminated? How strong is the D ring attachment point? Is this bumper rated for a 12,000 pound winch?
@haymakers2008Ай бұрын
How do you adjust the LED lights? They seem like one is aimed up and one is down.
@antonioborges7288Ай бұрын
Como hago para odtener las instrucciones de la base por favor y poder fabricarlas
@TorisGarageАй бұрын
Is it true that a dent in these rear bumpers can’t be pressed out? The only way is to replace entirely?
@terrywbreedloveАй бұрын
Wow love this tutorial. I am an about to replace mine with another OEM cover just like it. And was scared it might be really difficult. And at the same time replace the Headlights. This looks so easy.
@beckygibson7371Ай бұрын
I had to change my front bumper and it was longer than my original one.what do I do
@viper6bravo57Ай бұрын
I'm looking at the proximity sensors on my 2024 and they look WAAAAY smaller than the holes in the bumper and they look nothing like your sensors. Is there an adapter?
@kcrytzerАй бұрын
Much appreciated, perfect instruction video.
@biga62392 ай бұрын
Would be better without the music
@limoncelloRubicon2 ай бұрын
Would be great to see you put the soft top down. It would be nice to see how the soft top rests. Does it rest on top of that shelf? Because if it does, then it truly doesn’t work with a soft top.
@GR0182 ай бұрын
Very nice.
@jojo4rmdabronx2 ай бұрын
The mount can easily be stolen
@turn-n-burn14212 ай бұрын
I have this bumper delete. So, two things. At first, in the first hour; I was disappointed that some hardware (nuts and bolts) were missing. Then, I became frustrated when I sent an email informing them of the missing pieces. When Fishbone didn't respond, I became a one-time customer. The bumper, oh, I nearly forgot the utter irony in the title of this video. Install a delete. Think it over. Anyway my non-bumper, bumper is okay. Fishbone customer service is complete unmitigated crap.
@grantparnes2 ай бұрын
Would be a 10 out of 10 if it was about 2 inches higher and would hide the pinch welds like the factory slider did, and also provide stock clearance to the ground.
@jamessmith-bw4nb3 ай бұрын
Thank you! I knew I wasn't picking crazy
@MrScrewIt3 ай бұрын
I removed all those bolts and it won't come off
@Jankie163 ай бұрын
What if I just wanted to slide it a little back? Can I unscrew the torx nuts and slide it back just to have enough space to remove the cabin pressure vents?
@wallyc13493 ай бұрын
Good video… You trimmed about 90% of the fat off of that video, getting right to the point
@Lumilan3 ай бұрын
I am concerned that this blocks airflow for the intercooler on Ecoboost trucks. Is this an issue?
@FishboneOffroad3 ай бұрын
The winch plate for this bumper is not compatible with Ecoboosts, but the bumper itself will fit. Out of the box the bumper comes with a removeable accent mesh, which will allow for proper air flow
@hojalateriaypinturanewjers99983 ай бұрын
Thank you. very helpful.
@iBryaaannnn3 ай бұрын
What part number for the support bracket with the bolts you removed?
@jamessamen39333 ай бұрын
Thanks
@41Atatsiak3 ай бұрын
What do you do with the block heater plug in?
@N_SimpsonBassFishingNSBF4 ай бұрын
Unreal how dumb the design is. You have to left the bed to pull the bumber. Thanks engineers
@jeff5034 ай бұрын
why don`t you show dropping the gas tank?
@Nathan-wn5mc4 ай бұрын
Easy enough. Thank you.
@kylercamilli27554 ай бұрын
Super helpful and straightforward. Thanks mate
@kylercamilli27554 ай бұрын
Super help and straightforward. Thanks
@cosmicchuck4204 ай бұрын
Great video, music is annoying
@user-iw3pe4qu4z5 ай бұрын
Where do you get those hole templates
@cruelsun92435 ай бұрын
I simply replaced the bumper. I can't find the correct strip
@adamstrong72845 ай бұрын
How do you tighten tho bolts that belong in the holes you drilled?
@jessiegreen65285 ай бұрын
I've been searching for a winch bumper for ages this is perfect can the grill be color matched to the truck or would it be hard ?
@FishboneOffroad5 ай бұрын
It would be a little difficult to do on your own, but probably a 1-2 day's project for a shop. You would have to sand blast the powder coating, paint it, and then clear coat it.
@Blakeh19115 ай бұрын
These support arms do not turn when i tighten the screw
@waltengelenburg11145 ай бұрын
Can you add the removal of the 4 sensors from the bumper?
@user-vz2cf7yy5e5 ай бұрын
Is this the same on the 2007 Chvy Avalanche?
@wadesmith94835 ай бұрын
Mud flaps…… lol
@aidanvasquez9956 ай бұрын
Will these work with the Fishbone Offroad rack?
@ChuckBaldwinOutdoors6 ай бұрын
I hope these are tough! I took of the Rubi rails and installed a pair on my JLU a couple weeks ago and heading to Anza Borrego this weekend.
@pedram4sk86 ай бұрын
Is it possible to tow with that bumper ( it does have a place for the ball in the middle of the bumper in front of the license plate ) or you need to install a tow hitch
@garyreneau61666 ай бұрын
This doesn’t look anything like my 07 Tundra bumper 🙁
@youKnowWho33116 ай бұрын
******** 2011. That is NOT 19mm on the front bumper bolts
@peepooh98134 ай бұрын
2009 Silverado 1500. Need more than 19mm for front bumper
@RRbookie6 ай бұрын
It's the inserts that I don't like on the sport. Good thing they can be removed.