You've had it a year? I've gone thru 3 of them in about 2 months, lol. I love flying mine indoors, it's a pity you can't buy upgrades for it, like metal blade grips and swash plate. Or even better I think there's a market for a good quality 4CH heli for indoor flight. I really like the way Eachines uses proper servos on the E129, instead of those linear servos that Blade uses on it's smaller helicopters. The thing I've noticed with the E129, is it needs a lot of trim. When you bind it to the TX16, you need to give it so much trim, that the flight controller no longer responds to the radio. So, for instance, if you add the subtrim in the radio so that it hovers in 1 place, to get it to bind and respond to the gimbles at 45 degrees to start the heli, you have to remove the saubtrim 1st, and then add it back in before you take off, which isn't ideal, but we are talking about a heli that cost less than £40 including shipping.
@UK-English-Lifestyle2 ай бұрын
Whilst useful, you could have said that apply the 1st coat thin and from a distant, let it dry and wait for about 10 mins and then a 2nd coat etc. It will take about a min to make that video and also it is the solvent that melts the foam buddy
@youronlycow2 ай бұрын
1. You can just say thank you. 2. This video was made 11 years ago. 3. If you just read the description, it’ll take you 10 seconds.
@youronlycow2 ай бұрын
@@UK-English-Lifestyle wtf? Read the description. I’ve never had to do this but I shall report you.
@johnjoseph85742 ай бұрын
Hi there and thank you for your tutorial! I tried to replicate the e129 setup on my Zorro Multi - it binds but no response from motors at all 😮 Any ideas welcome 🙏
@keithdriggers95785 ай бұрын
will this work for the rc era MD500 C189?
@maanmonares26715 ай бұрын
Hi, why when I used spray paint to p.e foam, it will scratch off the paint when it dries.
@michaelbutler29159 ай бұрын
It is people like you, who take the time to share what you’ve learned that make KZfaq the awesome place it is. Thank you for taking time to do this video. It is greatly appreciated. Because of videos like yours my TX16S mark II controls all 12 of my helicopter and 3 of my drones!
@youronlycow9 ай бұрын
Thank you for your kind words! Have a great day ahead!
@MitchellPetersoncustomdrone10 ай бұрын
Thx for this video and am hoping it is similar to a E110
@SMFLiveForMusic11 ай бұрын
LOOOOOL!
@vascoalmeida980511 ай бұрын
I fly mine with Zorro (mode 1) and have a problem I can't crack: it is extremely difficult to make it go backwards, it always wants to shoot, literally, forward. All the rest of it seems ok. What can I do?
@youronlycow11 ай бұрын
Have you tried trimming and subtrimming it rearwards? I highly suspect your heli is somehow adjusted to forward trim... I had that issue as well where I literally had to hold down elevator just to keep it from moving forward.
@vascoalmeida980511 ай бұрын
@youronlycow : Thank you for your help. After much experimenting, this is the best I could do to get some stable flying. In Model Setup, Trim Step = Coarse (to save time); all Inputs set to Trim =On; InputI Weight =50; Elevator Trim Sw = 32; Ail Trim sw= 0. I know nothing about Zorro subtrimming. Ths again, best regards.
@wizzie1497 Жыл бұрын
I’m new to the Saltwater hobby & I’m in love already , 10 Gallon Nano Innovative Marine started last Tuesday and just learning from here
@youronlycow Жыл бұрын
Welcome to the club. You will not regret it and you'll spend hours and hours looking into a home build window to the ocean.
@wizzie1497 Жыл бұрын
@@youronlycow lol i already know thank you !
@michaelbutler2915 Жыл бұрын
Thanks for taking the time to make this video, and share this info. I. Really did not want to use that toy grade radio it came with! You ROCK!!!
@youronlycow Жыл бұрын
It's a very nice indoor hobby grade heli. The stock toy grade radio makes this less desirable to fly. Using the TX16 makes it way more enjoyable. Have a good one!
@ndiwww Жыл бұрын
works on JJRC M05 as well, thanks
@shree1210 Жыл бұрын
Thank you
@ngaichimto3107 Жыл бұрын
Can you programmed 1 more chanel for high/low rate :)). Like your video so much
@kawaigreis2 жыл бұрын
De mi se derritio
@giao23802 жыл бұрын
I read to use acrylic paint and it won’t melt
@giao23802 жыл бұрын
I did not know this! Thank you SO much for this info!
@kunad22942 жыл бұрын
you are the boss, thanks for your video
@u2bqu2 жыл бұрын
Thanks 🙏
@fcatlantida87652 жыл бұрын
You can use engine ceramic enamel if you've got some laying around
@txdave22 жыл бұрын
I agree with 100%. This was my first RC helicopter. It is so easy and fun to fly, and is very inexpensive. I have it bound to my TX16S which has made it even more fun to fly.
@txdave22 жыл бұрын
This also works for the E130. Thanks for posting this helpful video.
@youronlycow2 жыл бұрын
You're most welcome! Hope the video was short, sharp and sweet to the point.
@thebeehivenailsmshunnybrow96412 жыл бұрын
Wow. That's interesting.
@youronlycow2 жыл бұрын
thanks! It's like watching another world within a world
@JeffNowitski2 жыл бұрын
can do this to epp foam to aircraft rc planes
@youronlycow2 жыл бұрын
yes you can. The focus is more on EPS foam as they are less resistant to the chemicals.
@akvasvet2 жыл бұрын
👍
@Gw0wvl2 жыл бұрын
🤣🤣🤣🤣 It's the Solvents used as the propellant not the actual paint that melts the styrofoam .
@arinavandam90282 жыл бұрын
Thank you so much for sharing how you can do it without buying all those extra stuff ! Love and kisses from me from the Netherlands
@youronlycow2 жыл бұрын
you are very welcome my friend. thank you for those kind words. Stay safe and enjoy building all your projects while saving $ at the same time! :D
@arinavandam90282 жыл бұрын
@@youronlycow i bought those strips who you can put on your wall but didn't know how I could paint them so while I was looking I saw your forum!!
@greenaquatics95032 жыл бұрын
Ebay?
@youronlycow2 жыл бұрын
not ebay but bought it online
@homeworkpictureshq2 жыл бұрын
Awesome
@homeworkpictureshq2 жыл бұрын
Cool... Nice aquarium
@suddahewageshanthapriyalal99992 жыл бұрын
Thanks lots
@moovintruespace9942 жыл бұрын
Just us Acrylic spray.
@michaelcarvalho36862 жыл бұрын
can you use plain paint like Asian paints on styrofoam?
@awolugoodness69063 жыл бұрын
Can you teach foam making project
@raymondkuhne77323 жыл бұрын
What brand is this and where did you buy it? How is it holding up in your saltwater tank? Any issues with fish, slime or etc.. Do you still have it in your tank?
@youronlycow2 жыл бұрын
it was really really cool initially but it collected a lot of gunk. whenever i removed it for cleaning a lot of gunk would leach out.. don't have it anymore
@JustOct693 жыл бұрын
just add a layer of white glue to protect it and it wont melt
@GenieAquarist3 жыл бұрын
Beautiful tank, sorry to hear qbout the shrimp
@styroyou3 жыл бұрын
ty much!
@yankardeleongarcia42013 жыл бұрын
Thanks!!!
@Gw0wvl3 жыл бұрын
To COLD 🤣 .... It's the solvents in the paint that melts the foam .
@youronlycow3 жыл бұрын
k thanks
@TheFishCorner3 жыл бұрын
Nice setup! Really love the clownfish!
@reinassance.18503 жыл бұрын
You save my projecttt
@youronlycow3 жыл бұрын
my pleasure
@darktoadone50683 жыл бұрын
I bought some 6 inch foam balls today that I am going to spray paint and make some Christmas ornaments balls with, hope this works.
@youronlycow3 жыл бұрын
it will work. just be sure to spray from a distance and not saturate it :) merry xmas
@finnkunertutube3 жыл бұрын
Well now I know what I did wrong , smiling. thx
@thisguysays77303 жыл бұрын
Thank you very much , you just saved my speaker stands ☺️
@kingsleykronkk39254 жыл бұрын
Best to start spraying multiple very fine layers of paint at approx 10 min intervals until touch dry (Building up thickness and color slowly) Does not always work as he shows multiple squirts of paint because of different brand paints (the solvents) and humidity (dry air better) and air temperature (hotter is best) Spraying very fine mist in small amounts and quickly fan dry (by moving or fan) can help with aggressive paint solvents. Some spray can nozzles and paints don't produce as fine a mist so test on any styrene scraps (normal packing styrene foam is eaten more easily than the skin coating on Depron so it's a good test)
@sg-frugurl61064 жыл бұрын
Very therapeutic short clip
@junsim20104 жыл бұрын
where did you get this? i have been looking for it ...
@shawninnabarrett36754 жыл бұрын
kzfaq.info/get/bejne/m6hxddSKsZ6rfJs.html temperature fen o m e n on? kzfaq.info/get/bejne/o52GY8J_xr2xe40.html they don’t know how manage temperature does continue in water mont it is always epidemics like chins president had said kzfaq.info/get/bejne/mtaGmpycqLSmmp8.html propellant evaporates? s p ra y i n Angle? no mel t DAUN