seems great for motion...but what about the feeling of the road, suspension travel, kerb vibration, rubble strip....can u feel it? tx. Great vid!

How has it held up? I'm currently looking at the DOF P3.

Is this the one to get if you're on any sort of budget? How does it fair against the Next Level Racing stuff?

P3 v H3 ?

If you paired this with VR, the experience would be incredible!

What would be cool is if you could link up with a real race going on and and virtually compete against real drivers.

Do you intend to make an update video about the F3?

Do you have the dimensions for the triple monitor mount?

I've been flying since '02 and have flown many different wings in that time. I'll say that the F3 is about my all-time favorite ... right up there with the old Paramania Action, Dudek Hadron and Ozone Viper. I wish they made it in a 28m, but I think it's just a great wing!

had to turn feedback down to 3, it feels odd set higher.

Hej Johnny! Nu antar jag att den skickas från usa, så hur mycket extra blev det med tullavgifterna och håller den fortfarande efter så här många år? Ser grymt kul ut iallafall 👍🏻

Where can you buy a seat for it? since DOF don't include a race seat, I'm interested in getting the P3, but not sure where to buy a seat for it, any ideas? 🤔

That glider was really nice to fly

Great video! I am looking forward to buy P3 and I would like to know, if it's possible, how to make the structure for the 3 monitors and also, how to make the wheels for the rear traction in case they break. Thank you very much!

How is it holding up after all these years?

Can you export and review your flight data, either in their program or in a spreadsheet?

Excellent review from start to finish. :)

Can Anyone comment on whether the P3 is worth the premium over the H3. I saw from their description that the P3 is more meant for constant arcade use and the H3 is more for home use. Overkill to get the P3?

Hmmm... no answer to any of the requests for update on this rig so it most likely broke after 6 months. Thanks Johnny.

Now that it's been 4 yrs how is your p3 holding up and what have you done to make it better

Hi. If you still have this, how is it holding up after 4 years?

Hello 🙋‍♂️ I had a question Is simtools a difficult software? And how long do you work with your setup (looks very smooth your driving motion) I had a h3 and had problems with smooth driving with my simulator 😬 (I work with simracingstudio) and that was difficult the perfect setting 😬

Good helper

how the rig hold the extra weight and the monitors after 3 years of use? still working all fine?

Does anyone make a kit to mount monitors to a DOF rig like you did?

Of course you can lol actually somehow alot of the best out there get the fastest lap times with the g29 as crazy as that sounds its very reactive towards road feel due to the gear drive you feel it right away the wheel isn't to fast yet you can correct very easily and you just feel everything which is pretty good and at 220 right now you can't beat it for the price lol idk why he days he wishes it felt stronger I know people that love the ffb strength it's plenty and it will snap in a good way if you want it to I feel liek you could of gotten more then you said because I've talked to so many people thinking it feels the same strength as the t300rs which we all know is plenty we can't expect DD type of power or even the top of the line thrustmaster them there would be no market for the others they couldn't do all of that at the price regardless and yes it feels stronger then 2.2nm it def is very similair to the t300rs which has been tested to be around 3.9 idk why the g29 feels like that but it does msbye because of the wheel being smaller you feel the ffb more then the numbers show lol

Excellent review, this is a nice toy :)

Hi Johnny, im surprised you affixed the monitors to the sim as DOF Reality don't recommend this as it puts weight on the sim. When you are driving down hill and uphill can you feel this in the P3?

How wide is the front base? The pictures on their website the rear looks wider. The max space I have for the front base is 28”, or 711 mm. Rear isn’t a problem for me. Edit: read in a post on another site, that the rear base is 28” and the front a few in narrower. That would prob be a very tight fit.

Hi Johnny, thanks for this great review!, I have received my DOF P3 RIG. I am not clear yet about attaching or not the triple monitors directly to the RIG. I would really appreciatte if you could give some advice, considering your experience after 2 years using your RIG with the triple monitor attached. Thanks in advance for your valuable comments!

Does this come with pedals shifter and wheel? Thanks

Great review, thanks Vortex Racing 👌🙌

Did any one tried it with car or truck simulator the SimuRide by Aplusbsoftware?

Johnny, I had the same issue. Then I went into VR.. Absolutely incredible. I built my own motion rig DIY and have posted a whole bunch of videos with the RIG side by side in VR. Pretty comparable for sure. Also if something acts weird in my RIG, I can fix it.. Just saying! Take a look if you get a chance, I know your busy. But Great Channel!! DMAX

What monitors are you running?

They appear to have replaced those wheels with 2 larger, wider, "skateboard" wheels, according to a video I just watched that was made this year. Looks like a HUGE improvement to the smoothness, sound silencing, and reliability.

i think this guy is ignoring the fact that its a 300$ wheel set. It's not a 500$+ wheel set that has the best of the best, it's a budget sim racing wheel so put that into consideration

Where did you get the mount for the triple monitors? Any loss of power with the added weight/CG in the front? I like the idea of monitors over VR, but would like the monitors to move with the unit. Can you post a link for that?

2 years later and this review was a part of my final decision to get the P3. DOF is a great manufacturer that still has a great repour with its customers on social media. The machine i got this past August had upgrades i had not seen in any videos online so they are still using feedback to improve design. I am fairly certain but not positive they keep a personal rep on FB to monitor any problems anyone posts that the community can't answer. So very many cool mods with full support are right there. Usually from the original authors of the mod and you never see DOF squash creativity by saying "Thats not the way we designed it" or crap like that. Always supportive posts with people tossing machine force settings around to tweak. I know without a doubt i will get 10+ years easy out of this machine. And i can upgrade to 6 axis if wallet gets fat enough. 2010 Honda Accord seat bolts right in but does require metal cutting to remove excess steel under and inside back, as well as the side airbag. Drill and tap 4 holes. Bolt it right on. Keeping things light always makes mechanical contraptions happy.

No one talks about the butt kicker in these videos. I feel this is a huge upgrade to most rigs. Am I wrong?

Wow! Nice. An d this must be even greater with the HP Reverb G2!

hi how i can make my g29 not heavy im playing forza 4 on pc pleaze help me

If you wanna really get into the game the best way to do it it’s getting a VR

It is Aug 2020 now, is this still working well for you now!??? I was thinking about getting one, I just wan to know about reliability. Thanks

next time cut the "music" please

Hi, nice channel, good job! I will buy a p3 an I wondering which Seat do you use? or recomends? I will be så happy if you can help me whit that. Thnxs!

Does anyone know the price of the P3 as compared to the H3? I can’t seem to find it on the website. And also approximate square footage of the assembled rig?

Don't purchase it, one of the motors will break while still in warranty and they won't send a replacement...just don't buy it!

Hy Johnny, I did order a P3 system a few weeks ago and it should be here sometime mid summer. I am interested in you rig to fit the 3 monitors.The frame you build is no problem, but how did you move the seat and pedal frame back to compensate for the monitor weight in front? Did you just drill new holes for the upper frame to sit further back on the free movemente element ? Do you remebre how many cm you had to displace the upper frame backwards ? I see some extra holes drilled in the bottom frame, probably to move the motor frame back and keep the actuator rod vertican. Great video by BTW. Thanks

I wonder if he turns the wheel hard right if his monitors will hit the wall