You can look it up based on the brand of toilet you have. There may be a marking or stamp on the inside of the toilet bowl indicating a model. There are also universal parts that fit multiples of toilet types. Consult the documentation of the universals for fitment to yours.
@annonymous92605 күн бұрын
Only issue is some instructions say to put bolt, rubber washer, then rubber washer, metal washer, nut under tank then finally metal washer, nut. Gives extra protection for water leaks from tank. wish my kit came with extra rubber washers for extra protection.
@aywannory44119 күн бұрын
"Can you please tell me the diameter of the circular whole inside the box? Is it 5.08 cm, which equals 2 inches?"
@theXchange8 күн бұрын
I haven’t the slightest off the top of my head.
@wagonwheeldc13 күн бұрын
Nice video. Had to unclog a kitchen sink and couldnt believe the scum.
@theXchange12 күн бұрын
Yea. It’s pretty nasty 🤮
@phillipk.brodie966214 күн бұрын
This video was very helpful. I tried doing this years ago and it took forever. I couldn't get the tank level. After watching this, I think I can handle it next time. The son/cameraman was a great touch. 🙂
@theXchange13 күн бұрын
Thanks!!
@TheUniverseHasMyBack15 күн бұрын
Thank you so much, is had the same problem.... Damn pasta lol... This was so helpful🙂
@bronston8115 күн бұрын
If you gotta keep jumping your batteries, do you need a new battery?
@theXchange14 күн бұрын
Eventually, we ended up getting a new one. Problem was that the battery tested good until finally, it didn’t. Plus, with young kids, we often found doors ajar and lights on in the van so at first, causation was hard to determine.
@lonthrall561316 күн бұрын
Excellent instruction! Thank you!
@theXchange16 күн бұрын
You’re welcome!
@Realsmano16 күн бұрын
Kidly rply ik pen se kitna lg loose ho skta ha
@radbond126 күн бұрын
The original hexnut is completely different from the one that comes with the replacement. The toilet gasket is supposed to fit over the hexnut and the tank is then lowered into the toilet. The gasket is NOT to be placed onto the toilet and the tank lowered onto it. It is impossible to fit the gasket over the new hexnut since the new hexnut is not circular like the original. You MUST use the original hexnut and fit the new gasket over it. Otherwise, when the toilet is flushed, you'll get water coming out from under the tank. As you may have noticed, Kris reused the original hexnut without explanation.
@SueEllenLawtonАй бұрын
Did you have an issue with the tank wobbling as it sits atop that giant tank-to-bowl gasket?
@theXchangeАй бұрын
It’ll wobble until the tank to bowl kit is installed
@thallyfromhalliewisco2656Ай бұрын
Can you not just replace the broken cap?
@th-sp2ogАй бұрын
Thank you this video helped a lot
@NissimChudnoffАй бұрын
Thanks for the great video - one of the few that also showed the problem, vs. only repairs after the fact. Loved the helper repeating your instructions :) Cheers - and thanks for saving us from an expensive service call!
@theXchangeАй бұрын
I’m glad the video helped!! I couldn’t have done it without my helper :)
@SonicOrbStudiosАй бұрын
Tip, flip those channel locks so they tighten as you turn
@theXchangeАй бұрын
Thanks!!
@nightrangerrules938Ай бұрын
Kris, thanks a bunch for making this video and it was very helpful. My fill valve was loud and figured my 10 year old toilet needed to be rejuvenated. I received a rebuild kit from Mansfield but no instructions just the parts. The replacement was on spot with your video and got no leaks when finished🚽
@theXchangeАй бұрын
That’s great! Thanks for the comment!
@robertlouisburnsАй бұрын
The jumpstart button blinks but then shuts off. Ideas? Is the battery ok but something else bad?
@theXchangeАй бұрын
The troubleshooting docs states: The HALO BOLT is not sufficiently charged to jumpstart the vehicle. -or- The HALO BOLT detects that it is connected to a vehicle battery that does not require a jump start. This could indicate that the vehicle battery or othercomponent is faulty. I haven’t personally experienced the described behavior to otherwise give a better idea.
@robertlouisburnsАй бұрын
Thank you for the answer.
@theXchangeАй бұрын
@robertlouisburns sure thing. I wish I had something more definitive for you!
@newnameautoАй бұрын
Thanks
@EVATUBE12 ай бұрын
Thank you for this tutorial. Just tr is rd and nothing happens when i press the jump start button. I only have 2 bars. Im charging it up now and will try again. Hopefully it works 🤞. Rain is coming and my windows are stuck down ☹️
@theXchange2 ай бұрын
I hope it works out for ya!!
@WhiteDoberman2 ай бұрын
P trap is always the first place to start if you're going into the pipes.
@Awalk052 ай бұрын
That supply line coupler looks cross threaded/ crooked other than that this was. A great how to
@theXchange2 ай бұрын
Your eyes 👀 do not deceive you. :). I fixed it off camera once I realized it
@Awalk052 ай бұрын
@@theXchange my flush valve is sticking it snapped the flush lever it’s very hard to flush. Will attempt this project tomorrow to replace flush and fill valve along with necessary hardware
@Speedmark14832 ай бұрын
Thank you for making this video and taking us step-by-step through the process. My drain instantly clogged when an open bag of loose leaf tea fell into the sink and I thought it could easily be flushed down the disposal. The hex key method and plunger method didn’t unclog my drain, so I was thinking that I was going to have to call a plumber. But then I came across your video! After following your steps, I had my drain unclogged in less than a half hour, start to finish. All the credit goes to you!! I can’t imagine how much money I saved from calling a plumber when this was such a simple process. Thank you again, and keep up the great work!
@theXchange2 ай бұрын
Awesome!! I’m glad it worked out for you!!
@MrAmesj21 күн бұрын
125.00 for the first hout
@kevokeefe50672 ай бұрын
Thank you! This video made it possible for me to fix instead of replace.
@donkesterson97082 ай бұрын
Found your video which helped me figure out how to fix my same problem. I bought the part from amzn. The part arrived in a couple of days and before I could swap it we ran the dishwasher again which didn't whistle. I ran it a couple more times with no whistle before putting the part up and will replace if it ever whistles again. My guess is that while investigating I moved the flexible metal clad hose under the washer several times which may have cleared some blockage (just a guess at this point). Appreciate your video greatly though.
@scvvm3 ай бұрын
i love my halo , ive used it for friends and myself , works amazing and an extra security measure, i keep mine in glovebox fully charged🤙🏼
@theXchange3 ай бұрын
Same! All these years later, we have one in each car!
@Rodoman23 ай бұрын
Thanks. 👍
@whyzzman3 ай бұрын
Thanks. Just picked mine up and don't feel like reading through the manual yet...lol
@theXchange3 ай бұрын
I hear that!
@alexgere5293 ай бұрын
fuck youtube
@daliensb3 ай бұрын
Same on xenon?
@jessicaporter28053 ай бұрын
Perfect, thank you. Fixed my disposal right away. Guess you can't grind artichoke hair.
@11losangeles3 ай бұрын
I just realized that my garbage disposal doesn't have a cable or a plug. What do I do?
@theXchange3 ай бұрын
Turn the breaker off at the electrical panel
@redliner69403 ай бұрын
Ive owned many vw golf and always changed them my self... bought an e91 for my father 2010 model and i find it really weird that you dont change it from top but near the wheel ..bmw😅 for ya..
@frog72213 ай бұрын
Thank you! I fixed my disposal clogged with eggplant (crazy but true) with just a steel ruler, which turned the screws out. This really saved me a lot of money and trouble. Thank for your detailed explanation!!
@theXchange3 ай бұрын
Awesome 👏
@shadisamaan3 ай бұрын
Amazing. It is your description in the video that made it work. Thank you very much
@mosiahist4 ай бұрын
Now that I have fingered this dirty pipe, let me put on some latex gloves**
@salmanalkredees64264 ай бұрын
Hello Kris, How’s the results of using Saxenda injection? How long have you spent using it and how many weight you lost ? Are you still using it, or you quit it and why.
@alexp93794 ай бұрын
Great overview, thanks! Two questions. 1. When you logout from the Meross App can you still control the doors from Homekit locally? 2. When internet is not available (no cell data either), can you still control the doors Meross App or Home? I believe you can still control the doors by Siri without a HomeKit hub when you add these as a shortcut. The name you give to the shortcut Siri would recognize it. That is how it works for my Kasa smart plugs KP125M.
@theXchange4 ай бұрын
1. Yes. Home works when logged out of the Meross App 2. No. An Internet connection is needed Good tip on use of shortcuts. I’ll have to try it and let you know ow how it goes!!
@alexp93794 ай бұрын
@@theXchange I got my MSG200HK yesterday and happy to report it actually works without Internet access (WLAN) from HomeKit and the Meross App. I don't have a HomeKit hub either. It is just my WiFi Router and an iPhone 13 Pro. The only strange issue is that the Meross Widgets didn't work in this scenario, but it work from the Meross App. I can also confirm the Homekit works when logged out of the Meross App.
@theXchange4 ай бұрын
I put my phone into airplane mode when I tested whether Internet is required. No internet = no garage control. How did you run your test? I still can’t get HomeKit to work unless I’m on my WiFi
@alexp93794 ай бұрын
@@theXchange You have to have the WiFi On in your phone, but unplug temporarily your Internet Service Provider. The wifi router has to be On as well. This is to test if a device needs to be connected to the WLAN in order to function. Fortunately these would work when the internet goes down, like in a major storm, for instance. As long as your LAN works these controllers would work.
@theXchange4 ай бұрын
@alexp9379 ah. Gotchya! That makes sense. Hope you like the Meross! I’ve been really liking it so far.
@MegaMrTmoney4 ай бұрын
This is the biggest piece of garbage I've ever owned. worked great until the latest iOS update then it no longer reliably functioned. Manufacture offers no support for the homekit version
@theXchange4 ай бұрын
It's been pretty solid for me so far. Regarding Homekit, I too, am a little disappointed as it doesn't seem to update in real time to inform the user when the garage has completed opening or closing, without force closing and reopening Home. Also, the Meross documentation incorrectly states that an iPad can be used as a Homekit Hub, which is no longer supported by Apple's latest version of Homekit (see details toward the end of the video).
@steveblacksbeatlescovers18474 ай бұрын
Can it CHARGE a riding lawn mower battery?
@theXchange4 ай бұрын
It sure can
@Kareszrk4 ай бұрын
What if somebody really does not eat much (me), half of a carrot is my breakfast no joke... For lunch I eat the same and for dinner I eat a mushroom with some vitamin supply. No sugar at all, I only drink water now for 2 years. My doctor gave me saxenda as well tho I know eat much less. Sometimes I eat breakfast (half one single carrot) in dinner time etc... And I am still unable to lose weight, unfortunetly not even with saxenda :( My blood tests are showing that I mostly miss several stuff I need, but thankfully because of the vitamin supplies I take it is getting solved. And I weight 120 kg right now, which is stable as hell. Once I was incredibly curious and I ate a pizza the whole day as it is a much higher calorie intake than what I usually take and I did not gain weight and nor lose. Doctor says that my endocrym system is pretty much f**ked up as literal hell. Should I further take saxenda? Will it ever help me? If no, anny suggestions? (Eating more is not an option, I don't have enough money to eat enough, so please don't suggest me this)
@theXchange4 ай бұрын
I’m honestly not quite sure how to answer this. I’m not a medical professional or dietitian. It seems to me you don’t have enough calorie intake that your body depends on fat to get what it needs to make it through each day. Where do you live such that you’re unable to increase your food intake? Are there any food pantry near that can assist?
@TjC_31244 ай бұрын
I'm getting ready to watch with my fingers crossed this video solves my issues. I have a Mansfield #106 toilet and am replacing both the flush and fill valves. However, I did not buy the kit. Instead bought the 2 units separately. I've removed both units and all is going well.....until I go to put the new units into the tank. Foe the life of me I can not figure out the height for the new fill and flush valves. To make it even worse, the inside of the tank was gross so I cleaned it without marking a water line. It's sat torn apart in my bathroom for three days now 😅😢
@theXchange4 ай бұрын
Oh my! Hopefully you get it all adjusted and working properly!
@carriedelgado74674 ай бұрын
Do you have to press button on overhead garage door opener first for 2024 Camry?
@theXchange4 ай бұрын
Hi! I just updated the video description with some additional info that may help you.
@artbyamberwilliams30634 ай бұрын
This was incredibly helpful. I watched first to convince myself i could do it, and then I watched step by step while completing the project. I believe all previous parts were from 2002. I think everything was ready to break, and I'm glad to have replaced everything.
@LikeDURMsmart2Ай бұрын
Bruh
@LikeDURMsmart2Ай бұрын
You can install a new ballcock fill valve
@danarosalescarrillo5 ай бұрын
Thank you i will try this when i get home
@funnygunner74845 ай бұрын
Week 1 down 6lb
@theXchange5 ай бұрын
Whoot!!
@user-bm4kk2ny4p5 ай бұрын
Great video but if you are married your wife must still be giving you grief over all the tiny scratches you put on the nice tub. PUT A TOWEL DOWN!
@theXchange5 ай бұрын
Heh. No doubt. Man moment caught on tape!!
@lesleya19595 ай бұрын
I see a noticeable difference in your face! Keep up the good work! :)
@camarogs15 ай бұрын
those are not vise grips. LOL
@theXchange5 ай бұрын
I stand corrected 😂
@charlesmartel39955 ай бұрын
Didn't work for me on my 2023 Highlander
@lawrencerooney27723 ай бұрын
Is it a toyoya?
@leacarpenter60745 ай бұрын
If I didn’t buy extra bolts can I use the 2 bolts from the kit and one of the old bolts?
@theXchange5 ай бұрын
You’d risk a leak as the rubber seals for the 3rd screw could be brittle. At the very least, pick up a pack of new rubber seals.